From: Márton Németh <nm127@xxxxxxxxxxx> On the schematics in PixArt PAC7301/PAC7302 datasheet (http://www.pixart.com.tw/upload/PAC7301_7302%20%20Spec%20V1_20091228174030.pdf) pages 19, 20, 21 and 22 there is a note titled "PID IO_TRAP" which describes the possible product ID range 0x2620..0x262f. In this range there are some known webcams, however, there are some PIDs with unknown or future devices. Because PixArt PAC7301/PAC7302 is a System on a Chip (SoC) device is is probable that this driver will work correctly independent of the used PID. Signed-off-by: Márton Németh <nm127@xxxxxxxxxxx> --- diff -r dfa82cf98a85 linux/drivers/media/video/gspca/pac7302.c --- a/linux/drivers/media/video/gspca/pac7302.c Sat Jan 30 20:03:02 2010 +0100 +++ b/linux/drivers/media/video/gspca/pac7302.c Sun Jan 31 11:08:21 2010 +0100 @@ -96,6 +96,7 @@ u8 flags; #define FL_HFLIP 0x01 /* mirrored by default */ #define FL_VFLIP 0x02 /* vertical flipped by default */ +#define FL_EXPERIMENTAL 0x80 /* USB IDs based on heuristic without any known product */ u8 sof_read; u8 autogain_ignore_frames; @@ -1220,17 +1221,33 @@ }; /* -- module initialisation -- */ +/* Note on FL_EXPERIMENTAL: + * On the schematics in PixArt PAC7301/PAC7302 datasheet + * (http://www.pixart.com.tw/upload/PAC7301_7302%20%20Spec%20V1_20091228174030.pdf) + * pages 19, 20, 21 and 22 there is a note titled "PID IO_TRAP" which describes + * the possible product ID range 0x2620..0x262f. In this range there are some + * known webcams, however, there are some PIDs with unknown or future devices. + * Because PixArt PAC7301/PAC7302 is a System on a Chip (SoC) device is is + * probable that this driver will work correctly independent of the used PID. + */ static const struct usb_device_id device_table[] __devinitconst = { {USB_DEVICE(0x06f8, 0x3009)}, {USB_DEVICE(0x093a, 0x2620)}, {USB_DEVICE(0x093a, 0x2621)}, {USB_DEVICE(0x093a, 0x2622), .driver_info = FL_VFLIP}, + {USB_DEVICE(0x093a, 0x2623), .driver_info = FL_EXPERIMENTAL }, {USB_DEVICE(0x093a, 0x2624), .driver_info = FL_VFLIP}, + {USB_DEVICE(0x093a, 0x2625), .driver_info = FL_EXPERIMENTAL }, {USB_DEVICE(0x093a, 0x2626)}, + {USB_DEVICE(0x093a, 0x2627), .driver_info = FL_EXPERIMENTAL }, {USB_DEVICE(0x093a, 0x2628)}, {USB_DEVICE(0x093a, 0x2629), .driver_info = FL_VFLIP}, {USB_DEVICE(0x093a, 0x262a)}, + {USB_DEVICE(0x093a, 0x262b), .driver_info = FL_EXPERIMENTAL }, {USB_DEVICE(0x093a, 0x262c)}, + {USB_DEVICE(0x093a, 0x262d), .driver_info = FL_EXPERIMENTAL }, + {USB_DEVICE(0x093a, 0x262e), .driver_info = FL_EXPERIMENTAL }, + {USB_DEVICE(0x093a, 0x262f), .driver_info = FL_EXPERIMENTAL }, {} }; MODULE_DEVICE_TABLE(usb, device_table); @@ -1239,6 +1256,17 @@ static int __devinit sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { + if ((u8)id->driver_info & FL_EXPERIMENTAL) { + PDEBUG(D_ERR | D_PROBE, "WARNING: USB device ID %04x:%04x is " + "not known, but based on some heuristics this driver " + "tries to handle it.", + id->idVendor, id->idProduct); + PDEBUG(D_ERR | D_PROBE, "WARNING: Plase send an email to " + "linux-media@xxxxxxxxxxxxxxx with 'lsusb -v' output, " + "the vendor and name of the product and whether the " + "device is working or not."); + } + return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), THIS_MODULE); } -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
