Re: [PATCH 2/2] media: i2c: ov5645: Switch to assigned-clock-rates

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Prabhakar,

On Mon, Mar 09, 2020 at 11:46:13AM +0000, Lad Prabhakar wrote:
> This patch switches to assigned-clock-rates for specifying the clock rate.
> The clk-conf.c internally handles setting the clock rate, as a result
> setting the clk rate from the driver is dropped.
> 
> Correspondingly imx6qdl-wandboard.dtsi which references to ov5645 has been
> updated to use assigned-clock-rates in the same patch to avoid bisect
> failures.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 3 ++-
>  drivers/media/i2c/ov5645.c               | 9 ++-------
>  2 files changed, 4 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
> index c070893..71f5f75 100644
> --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
> @@ -126,7 +126,8 @@
>  		reg = <0x3c>;
>  		clocks = <&clks IMX6QDL_CLK_CKO2>;
>  		clock-names = "xclk";
> -		clock-frequency = <24000000>;
> +		assigned-clocks = <&clks IMX6QDL_CLK_CKO2>;
> +		assigned-clock-rates = <24000000>;
>  		vdddo-supply = <&reg_1p8v>;
>  		vdda-supply = <&reg_2p8v>;
>  		vddd-supply = <&reg_1p5v>;

Shouldn't this be a separate patch?

> diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> index a6c17d1..2aa2677 100644
> --- a/drivers/media/i2c/ov5645.c
> +++ b/drivers/media/i2c/ov5645.c
> @@ -1094,7 +1094,8 @@ static int ov5645_probe(struct i2c_client *client)
>  		return PTR_ERR(ov5645->xclk);
>  	}
>  
> -	ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
> +	ret = of_property_read_u32(dev->of_node, "assigned-clock-rates",
> +				   &xclk_freq);

I think you'd still need to check for clock-frequency to be compatible with
existing DT binaries.

>  	if (ret) {
>  		dev_err(dev, "could not get xclk frequency\n");
>  		return ret;
> @@ -1107,12 +1108,6 @@ static int ov5645_probe(struct i2c_client *client)
>  		return -EINVAL;
>  	}
>  
> -	ret = clk_set_rate(ov5645->xclk, xclk_freq);
> -	if (ret) {
> -		dev_err(dev, "could not set xclk frequency\n");
> -		return ret;
> -	}
> -
>  	for (i = 0; i < OV5645_NUM_SUPPLIES; i++)
>  		ov5645->supplies[i].supply = ov5645_supply_name[i];
>  

-- 
Regards,

Sakari Ailus



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux