In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272df6 ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx>
---
Changelog v1->v2:
*Change the remaining delays
drivers/media/spi/gs1662.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/media/spi/gs1662.c b/drivers/media/spi/gs1662.c
index d789d82df7c4..f86ef1ca1288 100644
--- a/drivers/media/spi/gs1662.c
+++ b/drivers/media/spi/gs1662.c
@@ -147,11 +147,17 @@ static int gs_read_register(struct spi_device *spi, u16 addr, u16 *value)
{
.tx_buf = &buf_addr,
.len = 2,
- .delay_usecs = 1,
+ .delay = {
+ .value = 1,
+ .unit = SPI_DELAY_UNIT_USECS
+ },
}, {
.rx_buf = &buf_value,
.len = 2,
- .delay_usecs = 1,
+ .delay = {
+ .value = 1,
+ .unit = SPI_DELAY_UNIT_USECS
+ },
},
};
@@ -175,11 +181,17 @@ static int gs_write_register(struct spi_device *spi, u16 addr, u16 value)
{
.tx_buf = &buf_addr,
.len = 2,
- .delay_usecs = 1,
+ .delay = {
+ .value = 1,
+ .unit = SPI_DELAY_UNIT_USECS
+ },
}, {
.tx_buf = &buf_value,
.len = 2,
- .delay_usecs = 1,
+ .delay = {
+ .value = 1,
+ .unit = SPI_DELAY_UNIT_USECS
+ },
},
};
--
2.17.1
