Hi Ian, Thank you for the patch. On Mon, Feb 24, 2020 at 11:35:54PM +0100, Ian Kumlien wrote: > Hi, > > I got surprised by: > ld: drivers/media/i2c/tvp5150.o: in function `tvp5150_probe': > tvp5150.c:(.text+0x11ac): undefined reference to `__devm_regmap_init_i2c' > make: *** [Makefile:1078: vmlinux] Error 1 > > When going from 5.5.2 -> 5.5.6 > > A quick git grep shows that something like this might be needed, but > it should be verified. > I'm really uncertain about the ones that say REGMAP_SCCB... Those don't need REGMAP_I2C for they use SCCB. Please also do not send attachments; your mail is likely consumed by some list servers that way. > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > index c68e002d26ea..fc40c111f461 100644 > --- a/drivers/media/i2c/Kconfig > +++ b/drivers/media/i2c/Kconfig > @@ -238,6 +238,7 @@ config VIDEO_ADV7604 > tristate "Analog Devices ADV7604 decoder" > depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API > depends on GPIOLIB || COMPILE_TEST > + select REGMAP_I2C > select HDMI > select V4L2_FWNODE > help > @@ -379,6 +380,7 @@ config VIDEO_TVP5150 > tristate "Texas Instruments TVP5150 video decoder" > depends on VIDEO_V4L2 && I2C > select V4L2_FWNODE > + select REGMAP_I2C > help > Support for the Texas Instruments TVP5150 video decoder. > > @@ -584,6 +586,7 @@ config VIDEO_IMX214 > tristate "Sony IMX214 sensor support" > depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API > depends on V4L2_FWNODE > + select REGMAP_I2C > help > This is a Video4Linux2 sensor driver for the Sony > IMX214 camera. > @@ -612,6 +615,7 @@ config VIDEO_IMX274 > config VIDEO_IMX290 > tristate "Sony IMX290 sensor support" > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API > + select REGMAP_I2C > select V4L2_FWNODE > help > This is a Video4Linux2 sensor driver for the Sony > @@ -774,6 +778,7 @@ config VIDEO_OV7251 > config VIDEO_OV772X > tristate "OmniVision OV772x sensor support" > depends on I2C && VIDEO_V4L2 > + select REGMAP_I2C So this isn't needed. > select REGMAP_SCCB > help > This is a Video4Linux2 sensor driver for the OmniVision > @@ -804,6 +809,7 @@ config VIDEO_OV7670 > config VIDEO_OV7740 > tristate "OmniVision OV7740 sensor support" > depends on I2C && VIDEO_V4L2 > + select REGMAP_I2C > help > This is a Video4Linux2 sensor driver for the OmniVision > OV7740 VGA camera sensor. > @@ -829,6 +835,7 @@ config VIDEO_OV9640 > config VIDEO_OV9650 > tristate "OmniVision OV9650/OV9652 sensor support" > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API > + select REGMAP_I2C Nor this one. > select REGMAP_SCCB > help > This is a V4L2 sensor driver for the Omnivision Could you send v2, please, removing those two? -- Kind regards, Sakari Ailus
