Hi Laurent, On Wed, Feb 19, 2020 at 12:08 PM Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: > > Hi Prabhakar, > > On Wed, Feb 19, 2020 at 11:42:42AM +0000, Lad, Prabhakar wrote: > > Hi, > > > > I am working Renesas RZ/Gx platforms, these boards have support for > > connecting MIPI adapter mezzanine board [1]. To enable this support I > > am planning to create a dtsi which will include the board file and > > enable the necessary VIN/CSI and the camera endpoint. > > > > For example: to add support for G2E board I would create a file named > > r8a774c0-cat874-mipi-adapter.dtsi which will include the board file > > r8a774c0.dtsi and enable necessary VIN/CSI/Camera endpoint and when > > user wants to enable this support for the G2E board he could just > > include r8a774c0-cat874-mipi-adapter.dtsi to r8a774c0-cat874.dts > > > > Would this be a good approach or is there an alternative way which I am missing. > > DT overlays are another option. They can't be applied on a running > system though. It doesn't seem like the mezzanine boards can be detected > by the boot loader, so overlays can't be applied automatically before > the kernel is started. One option would still be to provide them to > U-Boot and apply a selected overlay based on environment variables. > Another option would be to apply overlays as part of the build process, > which shouldn't require modifying the DT sources to #include the .dtsi > file for the mezzanine board. > Thank you for the insight, overlay is something which I wanted to avoid and have the dtb as part of kernel itself. How about just creating r8a774c0-cat874-mipi-adapter.dts which would include r8a774c0-cat874.dts file and enable the VIN/CSI/Camera endpoint, so the user would just use r8a774c0-cat874-mipi-adapter.dtb file when the mipi adapter is connected ? Cheers, --Prabhakar > > [1] https://github.com/Kevin-WSCU/96Boards-Camera/blob/master/AISTARVISION%20MIPI%20Adapter%20V2.1/AISTARVISION%20MIPI%20Adapter%20V2.1.pdf > > -- > Regards, > > Laurent Pinchart
