On Sun, Feb 2, 2020 at 1:30 PM Steve Longerbeam <slongerbeam@xxxxxxxxx> wrote: > > Hi Adam, > > On 12/16/19 9:20 AM, Adam Ford wrote: > > On Sun, Nov 24, 2019 at 1:08 PM Steve Longerbeam <slongerbeam@xxxxxxxxx> wrote: > >> Move media link creation into the notifier bound callbacks in the > >> subdevices required by imx, making use of media_entity_get_fwnode_pad(). > >> > >> In the process, improve the behavior of media_entity_get_fwnode_pad(). > >> The function is also being used inconsistently by current callers, so > >> that is fixed in this serieas as well. > >> > >> The default behavior of media_entity_get_fwnode_pad() fails when > >> the entity has multiple sink and/or source pads. Wrt imx, there are > >> two such entities: the imx6 csi-2 receiver, and the video mux. > >> > >> Modify the default behavior of media_entity_get_fwnode_pad() to first > >> determine if the port number at the provided endpoint firmware node > >> corresponds to a valid pad for the entity. That way the default behavior > >> will work for any entities that implement 1:1 mappings, without requiring > >> they implement the .get_fwnode_pad op. > >> > >> In other words, the old behavior of media_entity_get_fwnode_pad() required > >> entities implement .get_fwnode_pad if they have multiple sink or source pads. > >> The new behavior requires entities implement .get_fwnode_pad only if they > >> have multiple sink or source pads, and do not have 1:1 port:pad mappings. > >> > >> Also, as part of the above work, it was discovered that all of the > >> current callers of media_entity_get_fwnode_pad() are not using that > >> function in a consistent way. In all but one case the driver passes the > >> firmware node of the subdevice itself to the function, not one of it > >> endpoint nodes as the function expects. In more detail: > >> > >> - Cadence MIPI-CSI2 Receiver, > >> - ST Micro MIPID02 CSI-2, > >> - Allwinner V3s CSI, > >> - Allwinner A10 CSI, > >> - STM32 DCMI: > >> These drivers call media_entity_get_fwnode_pad() in the subdev bound > >> notifier callback, but passes sd->fwnode to the function. This is > >> usually the fwnode of the subdevice itself, not one of its endpoint > >> nodes. This only works now because there are no implementations of the > >> .get_fwnode_pad op. This will break as soon as the bound subdevice > >> implements the .get_fwnode_pad op. > >> > >> - Renesas R-Car MIPI CSI-2 Receiver: > >> Calls media_entity_get_fwnode_pad() in the subdev bound notifier > >> callback. In this case the driver passes the async subdev descriptor > >> match fwnode. Again for most subdevices, this is the fwnode of the > >> subdevice itself, not one of its endpoint nodes. However on the > >> Salvator-X platform, the bound subdevice happens to be the ADV748x > >> CSI-2 transmitter, which does indeed place the endpoint node in the > >> asd match fwnode. But the problem is that the driver is now making > >> assumptions about what subdevices it is binding to. > >> > >> To resolve the above issues, this series adds a new function > >> media_create_fwnode_pad_links(), which creates the media links from/to > >> all pads on a remote entity, to/from a single specific local entity pad, > >> using the fwnode endpoint connections between them. It's API makes it > >> convenient to call from subdev bound notifier callbacks. > >> > >> Another function media_create_fwnode_links() is added that will create > >> links from/to all pads on a remote entity, to/from all pads on a local > >> entity. It's API also makes it convenient to call from subdev bound > >> notifier callbacks, and can be called for entities that link to remote > >> entities via multiple pads (for example the video-mux which has multiple > >> sink pads that link to multiple bound subdevices). > >> > >> This series has been tested on i.MX6Q SabreSD, SabreLite, and SabreAuto > >> platforms, and the Renesas Salvator-X platform. > >> > >> The series needs testing on i.MX7, Cadence, ST Micro MIPID02, STM32 DCMI, > >> and Allwinner V3s and A10 platforms. Testing only needs to verify that the > >> media graph is unchanged, no stream testing is required. If the media graph > >> is broken, it means the subdevice(s) that bind to the drivers listed > >> above need to implement the .get_fwnode_pad op. > >> > >> History: > >> > >> v2: > >> - rename/move the notifier-to-state inlines in imx7-mipi-csis.c and > >> imx7-media-csi.c, suggested by Rui Silva. > >> - rewrite imx_media_create_links() to only add the missing media links > >> from the imx6 MIPI CSI-2 receiver. > >> > > I finally got around to testing the whole series on my i.MX6Q device > > with a ov5640 sensor. > > > > I get some error messages, and I was hoping you might have some ideas > > or suggestion on what might be happening. > > > > > > # gst-launch-1.0 -v v4l2src device=/dev/video4 ! kmssink name=imx-drm connector- > > id=54 sync=0 > > Setting pipeline to PAUSED ... > > Pipeline is live and does not need PREROLL ... > > /GstPipeline:pipeline0/GstKMSSink:imx-drm: display-width = 1920 > > /GstPipeline:pipeline0/GstKMSSink:imx-drm: display-height = 1080 > > Setting pipeline to PLAYING ... > > New clock: GstSystemClock > > /GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps = > > video/x-raw, format=(string)YUY2, width=(int)640, height=(int)480, > > framerate=(fraction)30/1, colorimetry[ 260.606952] ipu2_csi0: > > pipeline start failed with -32 > > =(string)bt601, interlace-mode=(string)progressive > > /GstPipeline:pipeline0/GstKMSSink:imx-drm.GstPad:sink: caps = > > video/x-raw, format=(string)YUY2, width=(int)640, height=(int)480, > > framerate=(fraction)30/1, colorimetry=(string)bt601, > > interlace-mode=(string)progressive > > ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Failed > > to allocate required memory. > > Additional debug info: > > gstv4l2src.c(658): gst_v4l2src_decide_allocation (): > > /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: > > Buffer pool activation failed > > Execution ended after 0:00:00.038167333 > > Setting pipeline to PAUSED ... > > Setting pipeline to READY ... > > Setting pipeline to NULL ... > > Freeing pipeline ... > > > > I visually verified my pipeline and tried to setup the video format > > for each node in the pipeline: > > > > media-ctl --links "'ov5640 2-0010':0->'imx6-mipi-csi2':0[1]" > > media-ctl --links "'imx6-mipi-csi2':1->'ipu1_csi0_mux':0[1]" > > media-ctl --links "'ipu1_csi0_mux':2->'ipu1_csi0':0[1]" > > media-ctl --links "'ipu1_csi0':2->'ipu1_csi0 capture':0[1]" > > > > media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480 field:none]" > > media-ctl --set-v4l2 "'imx6-mipi-csi2':0[fmt:UYVY2X8/640x480 field:none]" > > media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480 field:none]" > > media-ctl --set-v4l2 "'ipu1_csi0_mux':0[fmt:UYVY2X8/640x480 field:none]" > > media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480 field:none]" > > media-ctl --set-v4l2 "'ipu1_csi0':0[fmt:UYVY2X8/640x480 field:none]" > > media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]" > > > > > > I don't see any missing entries in the pipeline, so I was hoping you > > might have some suggestions. > > I tried the exactly equivalent pipeline on quad SabreSD and don't see > any issue. But from your > > ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Failed to allocate required memory. > > > it may be that you're platform was not able to allocate the buffer pools. I don't want to stand in the way. I'm sure its fine if it works with the SabreSD board. Maybe I did something wrong. adam > > > Steve > > > > >> Steve Longerbeam (23): > >> media: entity: Pass entity to get_fwnode_pad operation > >> media: entity: Modify default behavior of media_entity_get_fwnode_pad > >> media: entity: Convert media_entity_get_fwnode_pad() args to const > >> media: Move v4l2_fwnode_parse_link from v4l2 to driver base > >> media: entity: Add functions to convert fwnode endpoints to media > >> links > >> media: adv748x: csi2: Implement get_fwnode_pad > >> media: rcar-csi2: Fix fwnode media link creation > >> media: cadence: csi2rx: Fix fwnode media link creation > >> media: sun6i: Fix fwnode media link creation > >> media: st-mipid02: Fix fwnode media link creation > >> media: stm32-dcmi: Fix fwnode media link creation > >> media: sunxi: Fix fwnode media link creation > >> media: v4l2-fwnode: Pass notifier to > >> v4l2_async_register_fwnode_subdev() > >> media: video-mux: Create media links in bound notifier > >> media: imx: mipi csi-2: Create media links in bound notifier > >> media: imx7-mipi-csis: Create media links in bound notifier > >> media: imx7-media-csi: Create media links in bound notifier > >> media: imx: csi: Implement get_fwnode_pad > >> media: imx: csi: Embed notifier in struct csi_priv > >> media: imx: csi: Create media links in bound notifier > >> media: imx: csi: Lookup upstream endpoint with > >> imx_media_get_pad_fwnode > >> media: imx: Create missing links from CSI-2 receiver > >> media: imx: TODO: Remove media link creation todos > >> > >> drivers/base/property.c | 63 ++++++ > >> drivers/media/i2c/adv748x/adv748x-csi2.c | 21 ++ > >> drivers/media/i2c/st-mipid02.c | 20 +- > >> drivers/media/mc/mc-entity.c | 209 +++++++++++++++++- > >> drivers/media/platform/cadence/cdns-csi2rx.c | 27 +-- > >> drivers/media/platform/rcar-vin/rcar-csi2.c | 23 +- > >> drivers/media/platform/stm32/stm32-dcmi.c | 15 +- > >> .../platform/sunxi/sun4i-csi/sun4i_csi.c | 27 +-- > >> .../platform/sunxi/sun4i-csi/sun4i_csi.h | 1 - > >> .../platform/sunxi/sun6i-csi/sun6i_csi.c | 36 +-- > >> drivers/media/platform/video-mux.c | 30 ++- > >> drivers/media/platform/xilinx/xilinx-vipp.c | 69 +++--- > >> drivers/media/v4l2-core/v4l2-fwnode.c | 50 +---- > >> drivers/staging/media/imx/TODO | 29 --- > >> drivers/staging/media/imx/imx-media-csi.c | 92 +++++--- > >> .../staging/media/imx/imx-media-dev-common.c | 60 ++--- > >> drivers/staging/media/imx/imx-media-of.c | 114 ---------- > >> drivers/staging/media/imx/imx-media-utils.c | 33 +++ > >> drivers/staging/media/imx/imx-media.h | 5 +- > >> drivers/staging/media/imx/imx6-mipi-csi2.c | 29 ++- > >> drivers/staging/media/imx/imx7-media-csi.c | 55 +++-- > >> drivers/staging/media/imx/imx7-mipi-csis.c | 30 ++- > >> include/linux/fwnode.h | 14 ++ > >> include/linux/property.h | 5 + > >> include/media/media-entity.h | 99 ++++++++- > >> include/media/v4l2-fwnode.h | 56 +---- > >> 26 files changed, 735 insertions(+), 477 deletions(-) > >> > >> -- > >> 2.17.1 > >> >
