Adding support for EBI DMA unit (EDU).
Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/mtd/brcm,brcmnand.txt | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
index 82156dc8f304..05651a654c66 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -35,11 +35,11 @@ Required properties:
(optional) NAND flash cache range (if at non-standard offset)
- reg-names : a list of the names corresponding to the previous register
ranges. Should contain "nand" and (optionally)
- "flash-dma" and/or "nand-cache".
-- interrupts : The NAND CTLRDY interrupt and (if Flash DMA is available)
- FLASH_DMA_DONE
-- interrupt-names : May be "nand_ctlrdy" or "flash_dma_done", if broken out as
- individual interrupts.
+ "flash-dma" or "flash-edu" and/or "nand-cache".
+- interrupts : The NAND CTLRDY interrupt, (if Flash DMA is available)
+ FLASH_DMA_DONE and if EDU is avaialble and used FLASH_EDU_DONE
+- interrupt-names : May be "nand_ctlrdy" or "flash_dma_done" or "flash_edu_done",
+ if broken out as individual interrupts.
May be "nand", if the SoC has the individual NAND
interrupts multiplexed behind another custom piece of
hardware
--
2.17.1
