Re: [PATCH v2 1/2] dt-bindings: media: i2c: Add IMX219 CMOS sensor binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

Thanks for the review!

On 05.01.2020 00:53, Rob Herring wrote:
On Fri, Dec 27, 2019 at 03:21:13PM +0300, Andrey Konovalov wrote:
Add YAML device tree binding for IMX219 CMOS image sensor, and
the relevant MAINTAINERS entries.

Signed-off-by: Andrey Konovalov <andrey.konovalov@xxxxxxxxxx>
---
  .../devicetree/bindings/media/i2c/imx219.yaml | 134 ++++++++++++++++++
  MAINTAINERS                                   |   8 ++
  2 files changed, 142 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
new file mode 100644
index 000000000000..b58aa49a7c03
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
+
+maintainers:
+  - Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
+
+description: |-
+  The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
+  with an active array size of 3280H x 2464V. It is programmable through
+  I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
+  Image data is sent through MIPI CSI-2, which is configured as either 2 or
+  4 data lanes.
+
+properties:
+  compatible:
+    const: sony,imx219
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xclk
+
+  VDIG-supply:
+    description:
+      Digital I/O voltage supply, 1.8 volts
+
+  VANA-supply:
+    description:
+      Analog voltage supply, 2.8 volts
+
+  VDDL-supply:
+    description:
+      Digital core voltage supply, 1.2 volts
+
+  xclr-gpios:
+    description: |-
+      Reference to the GPIO connected to the xclr pin, if any.
+      Must be released (set high) after all supplies are applied.
+
+  camera-clk:
+    type: object
+
+    description: Clock source for imx219

This clock is external to the sensor, so a node for a fixed clock should
be too.

Done in v3.

+
+    properties:
+      clock-frequency: true
+
+    required:
+      - clock-frequency
+
+  # See ../video-interfaces.txt for more details
+  port:
+    type: object
+    properties:
+      endpoint:
+        type: object
+        properties:
+          clock-lanes:
+            const: 0
+
+          data-lanes:
+            description: |-
+              Should be <1 2> for two-lane operation, or <1 2 3 4> for
+              four-lane operation.
+            oneOf:
+              - const: [[ 1, 2 ]]
+              - const: [[ 1, 2, 3, 4 ]]

Not sure if this actually works. If it does, it exposes how we encode
the DT yaml format which we don't want to do here.

It does work - I am still not quite comfortable with json schema, and got
to the above by looking at the files produced by 'make dt_binding_check'.


It should be:

oneOf:
   - items:
       - const: 1
       - const: 2
   - items:
       - const: 1
       - const: 2
       - const: 3
       - const: 4

Thanks, got it.

Really, I think you shouldn't need the 2nd case as that should be the
default.

I've tried to implement that in v3 of the patch set.

Thanks,
Andrey

+
+          clock-noncontinuous:
+            type: boolean
+            description: |-
+              Presence of this boolean property decides whether the MIPI CSI-2
+              clock is continuous or non-continuous.
+
+        required:
+          - clock-lanes
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - VANA-supply
+  - VDIG-supply
+  - VDDL-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx219: sensor@10 {
+            compatible = "sony,imx219";
+            reg = <0x10>;
+            clocks = <&imx219_clk>;
+            clock-names = "xclk";
+            VANA-supply = <&imx219_vana>;   /* 2.8v */
+            VDIG-supply = <&imx219_vdig>;   /* 1.8v */
+            VDDL-supply = <&imx219_vddl>;   /* 1.2v */
+
+            imx219_clk: camera-clk {
+                compatible = "fixed-clock";
+                #clock-cells = <0>;
+                clock-frequency = <24000000>;
+            };
+
+            port {
+                imx219_0: endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    clock-lanes = <0>;
+                    data-lanes = <1 2>;
+                    clock-noncontinuous;
+                };
+            };
+        };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index ffa3371bc750..f7b6c24ec081 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15350,6 +15350,14 @@ S:	Maintained
  F:	drivers/media/i2c/imx214.c
  F:	Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
+SONY IMX219 SENSOR DRIVER
+M:	Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
+L:	linux-media@xxxxxxxxxxxxxxx
+T:	git git://linuxtv.org/media_tree.git
+S:	Maintained
+F:	drivers/media/i2c/imx219.c
+F:	Documentation/devicetree/bindings/media/i2c/imx219.yaml
+
  SONY IMX258 SENSOR DRIVER
  M:	Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
  L:	linux-media@xxxxxxxxxxxxxxx
--
2.17.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux