On Mon, Jan 06, 2020 at 11:06:12PM -0300, Ezequiel Garcia wrote: > On Tue, 2020-01-07 at 02:10 +0200, Laurent Pinchart wrote: > > Hi Helen, > > > > Thank you for the patch. > > > > On Fri, Dec 27, 2019 at 05:01:14PM -0300, Helen Koike wrote: > > > Add yaml DT bindings for Rockchip MIPI D-PHY RX > > > > > > This was tested and verified with: > > > mv drivers/staging/media/phy-rockchip-dphy/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy.yaml Documentation/devicetree/bindings/phy/ > > > make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/phy/rockchip-mipi-dphy.yaml > > > make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/phy/rockchip-mipi-dphy.yaml > > > > > > Signed-off-by: Helen Koike <helen.koike@xxxxxxxxxxxxx> > > > > > > --- > > > > > > Changes in v12: > > > - The commit replaces the following commit in previous series named > > > media: staging: dt-bindings: Document the Rockchip MIPI RX D-PHY bindings > > > This new patch adds yaml binding and was verified with > > > make dtbs_check and make dt_binding_check > > > > > > Changes in v11: None > > > Changes in v10: > > > - unsquash > > > > > > Changes in v9: > > > - fix title division style > > > - squash > > > - move to staging > > > > > > Changes in v8: None > > > Changes in v7: > > > - updated doc with new design and tested example > > > > > > .../bindings/phy/rockchip-mipi-dphy.yaml | 75 +++++++++++++++++++ > > > 1 file changed, 75 insertions(+) > > > create mode 100644 drivers/staging/media/phy-rockchip-dphy/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy.yaml > > > > > > diff --git a/drivers/staging/media/phy-rockchip-dphy/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy.yaml b/drivers/staging/media/phy- > > > rockchip-dphy/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy.yaml > > > new file mode 100644 > > > index 000000000000..af97f1b3e005 > > > --- /dev/null > > > +++ b/drivers/staging/media/phy-rockchip-dphy/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy.yaml > > > @@ -0,0 +1,75 @@ > > > +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/phy/rockchip-mipi-dphy.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Rockchip SoC MIPI RX0 D-PHY Device Tree Bindings > > > > Should this be s/RX0/RX/ ? Or do you expect different bindings for RX1 ? > > The driver currently only supports RX0, but I think you are right, > it should say RX here. This binding could be extended for RX1. > > > Looking at the PHY driver, it seems to handle all PHYs with a single > > struct device. Should we thus use #phy-cells = <1> to select the PHY ? > > I am not following this. The driver handles just one PHY. Each PHY > should have its own node. Looking at the registers, it seems that the different PHYs are intertwined and we would could have trouble handling the different PHYs with different DT nodes and thus struct device instances. > > > + > > > +maintainers: > > > + - Helen Koike <helen.koike@xxxxxxxxxxxxx> > > > + - Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx> > > > + > > > +description: | > > > + The Rockchip SoC has a MIPI D-PHY bus with an RX0 entry which connects to > > > + the ISP1 (Image Signal Processing unit v1.0) for CSI cameras. > > > + > > > +properties: > > > + compatible: > > > + const: rockchip,rk3399-mipi-dphy > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + clocks: > > > + items: > > > + - description: Mipi d-phy ref clock > > > + - description: Mipi d-phy rx0 cfg clock > > > > s/Mipi d-phy/MIPI D-PHY/ > > Yep. > > > > + - description: Video in/out general register file clock > > > + > > > + clock-names: > > > + items: > > > + - const: dphy-ref > > > + - const: dphy-cfg > > > + - const: grf > > > + > > > + '#phy-cells': > > > + const: 0 > > > + > > > + power-domains: > > > + description: Video in/out power domain. > > > + maxItems: 1 > > > + > > > +required: > > > + - compatible > > > + - clocks > > > + - clock-names > > > + - '#phy-cells' > > > + - power-domains > > > + > > > +additionalProperties: false > > > + > > > +examples: > > > + - | > > > + > > > + /* > > > + * MIPI RX D-PHY use registers in "general register files", it > > > + * should be a child of the GRF. > > > + * > > > + * grf: syscon@ff770000 { > > > + * compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; > > > + * ... > > > > missing > > > > * }; > > OK. > > > > + */ > > > + > > > + #include <dt-bindings/clock/rk3399-cru.h> > > > + #include <dt-bindings/power/rk3399-power.h> > > > + > > > + dphy: mipi-dphy { > > > + compatible = "rockchip,rk3399-mipi-dphy"; > > > + clocks = <&cru SCLK_MIPIDPHY_REF>, > > > + <&cru SCLK_DPHY_RX0_CFG>, > > > + <&cru PCLK_VIO_GRF>; > > > + clock-names = "dphy-ref", "dphy-cfg", "grf"; > > > + power-domains = <&power RK3399_PD_VIO>; > > > + #phy-cells = <0>; > > > + }; -- Regards, Laurent Pinchart
