Hi Jia_Ju,
This is a good finding. See my remarks below.
On 18/12/2019 3:05 PM, Jia-Ju Bai wrote:
> The driver may sleep while holding a spinlock.
> The function call path (from bottom to top) in Linux 4.19 is:
>
> drivers/media/platform/sti/bdisp/bdisp-hw.c, 385:
> msleep in bdisp_hw_reset
> drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 341:
> bdisp_hw_reset in bdisp_device_run
> drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 317:
> _raw_spin_lock_irqsave in bdisp_device_run
>
> To fix this bug, msleep() is replaced with mdelay().
>
> This bug is found by a static analysis tool STCheck written by myself.
>
> Signed-off-by: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
> ---
> drivers/media/platform/sti/bdisp/bdisp-hw.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/media/platform/sti/bdisp/bdisp-hw.c b/drivers/media/platform/sti/bdisp/bdisp-hw.c
> index 4372abbb5950..1a56348805a2 100644
> --- a/drivers/media/platform/sti/bdisp/bdisp-hw.c
> +++ b/drivers/media/platform/sti/bdisp/bdisp-hw.c
> @@ -382,7 +382,7 @@ int bdisp_hw_reset(struct bdisp_dev *bdisp)
> for (i = 0; i < POLL_RST_MAX; i++) {
> if (readl(bdisp->regs + BLT_STA1) & BLT_STA1_IDLE)
> break;
> - msleep(POLL_RST_DELAY_MS);
> + mdelay(POLL_RST_DELAY_MS);
In general, use of mdelay is discouraged. Here we can use udelay instead
of, with a max value of MAX_UDELAY_MS which is 2 on ARM.
So, instead of running 50 (POLL_RST_MAX) times a 20ms
(POLL_RST_DELAY_MS) delay, we can run 500 times a 2ms (2000us) delay.
The following changes shall be fine:
POLL_RST_MAX 50 --> 500
POLL_RST_DELAY_MS 20 --> 2
mdelay(POLL_RST_DELAY_MS) --> udelay(POLL_RST_DELAY_MS * 1000)
BR
Fabien
> }
> if (i == POLL_RST_MAX)
> dev_err(bdisp->dev, "Reset timeout\n");
