[PATCH 0/2] Add IMX219 CMOS image sensor support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patchset adds support for IMX290 CMOS image sensor from Sony.
Sony IMX219 is an 8MPix, 1/4.0-inch CMOS active pixel digital image sensor
with an active array size of 3280H x 2464V. It is programmable through
I2C interface. Image data are sent through MIPI CSI-2, which can be configured
as either 2 or 4 data lanes, but this driver currently only supports 2 lanes.
The currently supported resolutions are 3280x2464 @ 15fps, 1920x1080 @ 30fps
(cropped FOV), and 1640x1232 (2x2 binned) @ 30fps.

The driver has been tested with Raspberry Pi Camera Module v2 connected to
Raspberry Pi Zero W.

Thanks,
Andrey

Andrey Konovalov (1):
  dt-bindings: media: i2c: Add IMX219 CMOS sensor binding
Dave Stevenson (1):
  media: i2c: Add driver for Sony IMX219 sensor

 .../devicetree/bindings/media/i2c/imx219.yaml      |  112 ++
 MAINTAINERS                                        |    8 +
 drivers/media/i2c/Kconfig                          |   12 +
 drivers/media/i2c/Makefile                         |    1 +
 drivers/media/i2c/imx219.c                         | 1248 ++++++++++++++++++++
 5 files changed, 1381 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.yaml
 create mode 100644 drivers/media/i2c/imx219.c





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux