Hi Dongchun,
On Thu, Oct 31, 2019 at 5:12 PM Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx> wrote:
>
> This adds two more sensor modes for Omnivision ov8856 image sensor,
> including the resolution of 1632*1224 and 3264*2448, both with the
> Bayer Order of BGGR.
>
> Signed-off-by: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
> ---
> drivers/media/i2c/ov8856.c | 661 ++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 652 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
> index 8655842..4815c26 100644
> --- a/drivers/media/i2c/ov8856.c
> +++ b/drivers/media/i2c/ov8856.c
> @@ -3,10 +3,13 @@
> [...]
> @@ -1189,6 +1768,42 @@ static int ov8856_probe(struct i2c_client *client)
> return -ENOMEM;
>
> v4l2_i2c_subdev_init(&ov8856->sd, client, &ov8856_subdev_ops);
> + ov8856->fmt.code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +
> + ov8856->xvclk = devm_clk_get(&client->dev, "xvclk");
> + if (IS_ERR(ov8856->xvclk)) {
> + dev_err(&client->dev, "failed to get xvclk\n");
> + return -EINVAL;
> + }
> +
> + ret = clk_set_rate(ov8856->xvclk, OV8856_XVCLK_24);
> + if (ret < 0) {
> + dev_err(&client->dev, "failed to set xvclk rate (24MHz)\n");
> + return ret;
> + }
> + if (clk_get_rate(ov8856->xvclk) != OV8856_XVCLK_24)
> + dev_warn(&client->dev,
> + "xvclk mismatched, modes are based on 24MHz\n");
> +
> + ov8856->n_shutdn_gpio = devm_gpiod_get(&client->dev, "reset",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(ov8856->n_shutdn_gpio)) {
> + dev_err(&client->dev, "failed to get reset-gpios\n");
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < OV8856_NUM_SUPPLIES; i++)
> + ov8856->supplies[i].supply = ov8856_supply_names[i];
> +
> + ret = devm_regulator_bulk_get(&client->dev, OV8856_NUM_SUPPLIES,
> + ov8856->supplies);
> + if (ret)
> + dev_warn(&client->dev, "failed to get regulators\n");
> +
> + ret = __ov8856_power_on(ov8856);
> + if (ret)
> + dev_warn(&client->dev, "failed to power on\n");
> +
__ov8856_power_off is missing on the error path after the __ov8856_power_on.
> ret = ov8856_identify_module(ov8856);
> if (ret) {
> dev_err(&client->dev, "failed to find sensor: %d", ret);
> @@ -1241,8 +1856,29 @@ static int ov8856_probe(struct i2c_client *client)
> return ret;
> }
>
> [...]
