[PATCH] media: i2c: mt9v032: fix enum mbus codes and frame sizes

[<Eugen.Hristev@xxxxxxxxxxxxx>]

From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>

This driver supports both the mt9v032 (color) and the mt9v022 (mono) sensors.
Depending on which sensor is used, the format from the sensor is different.
The format.code inside the dev struct holds this information.
The enum mbus and enum frame sizes need to take into account both type of
sensors, not just the color one.
To solve this, use the format.code in these functions instead of the
hardcoded bayer color format (which is only used for mt9v032).

Suggested-by: Wenyou Yang <wenyou.yang@xxxxxxxxxxxxx>
Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
---
 drivers/media/i2c/mt9v032.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c
index 4b9b98c..5bd3ae82 100644
--- a/drivers/media/i2c/mt9v032.c
+++ b/drivers/media/i2c/mt9v032.c
@@ -428,10 +428,12 @@ static int mt9v032_enum_mbus_code(struct v4l2_subdev *subdev,
 				  struct v4l2_subdev_pad_config *cfg,
 				  struct v4l2_subdev_mbus_code_enum *code)
 {
+	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
+
 	if (code->index > 0)
 		return -EINVAL;
 
-	code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+	code->code = mt9v032->format.code;
 	return 0;
 }
 
@@ -439,7 +441,11 @@ static int mt9v032_enum_frame_size(struct v4l2_subdev *subdev,
 				   struct v4l2_subdev_pad_config *cfg,
 				   struct v4l2_subdev_frame_size_enum *fse)
 {
-	if (fse->index >= 3 || fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
+	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
+
+	if (fse->index >= 3)
+		return -EINVAL;
+	if (mt9v032->format.code != fse->code)
 		return -EINVAL;
 
 	fse->min_width = MT9V032_WINDOW_WIDTH_DEF / (1 << fse->index);
-- 
2.7.4