Hi,
Someone reported similar behavior recently, and was apparently able to
fix the issue by adding more delay between open/close sequences.
No search tags to find it on the list, can You remember device model?
Yes, this was an off-list discussion, available here:
http://royale.zerezo.com/forum/viewtopic.php?t=355
Didn't work, same -110 errors, sorry, no v4l-dvb git here, vdr
production machine on 2.6.32.7.
Just checked and the differences in the zr364xx driver are minor.
Would be better if you could work on LinuxTV hg/git tree so we have the
same basis for patches.
1. Patch with optimized delay below, slow but works, 1st try was
delaying subsequent msg at open sequence i=6, worked until the last 2
open() before capture start.
From the windows snoopy log I sent yesterday I can see only 1-2 URBs
with relevant delay of ~1s but
cannot see the sequence point.
Ok this is a bit hardcore but nice if it works.
What do you mean by "until the last 2 open()"?
Also, you may want to try with simpler tools like "dd" to do only one
clean open/close.
Ekiga/Cheese/Skype tend to do many open/close and this may not be the
ideal tools for debugging, but great to trigger the bugs ;-)
What is error -22, can not find it in errno.h?
I think it's -EINVAL.
2. Picture with (640->320) lines alignment error with ekiga+cheese
*attached*, wether cam is configured internally for 640x480 or 320x240,
not affecting.
setting the driver to mode=2 fails with libv4l jpeg decoding errors. I
try to correct this.
Do you know if the Windows driver support this mode?
If so, it would be helpful to have the snoop too.
3. Driver oops on modprobe -r or device firmware crash, I need to unplug
first or null pointer fault occours (mutex locks), see below
Ok that's bad, let me know if you find the issue.
Regards,
Antoine
--
Antoine "Royale" Jacquet
http://royale.zerezo.com
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
