Hello,
If it can help to validate this unit, you'll find below the result od
dmesg whenit is plugged in :
[ 86.977094] usb 2-1: new high speed USB device using ehci_hcd and
address 3
[ 87.129594] usb 2-1: New USB device found, idVendor=0ccd, idProduct=004c
[ 87.129614] usb 2-1: New USB device strings: Mfr=2, Product=1,
SerialNumber=0
[ 87.129627] usb 2-1: Product: Cinergy Hybrid T USB XS FR
[ 87.129637] usb 2-1: Manufacturer: TerraTec Electronic GmbH
[ 87.129824] usb 2-1: configuration #1 chosen from 1 choice
[ 87.313123] em28xx: New device TerraTec Electronic GmbH Cinergy
Hybrid T USB XS FR @ 480 Mbps (0ccd:004c, interface 0, class 0)
[ 87.326274] em28xx #0: chip ID is em2882/em2883
[ 87.485970] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 4c 00 60 12
5c 03 6a 38 a2 34
[ 87.485993] em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00
00 00 00 00 00 00
[ 87.486011] em28xx #0: i2c eeprom 20: 4e 00 10 00 f0 10 31 88 b8 00
14 00 5b 1e 00 00
[ 87.486029] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01
00 00 00 00 00 00
[ 87.486047] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 87.486064] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 87.486082] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00
38 03 43 00 69 00
[ 87.486100] em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00
20 00 48 00 79 00
[ 87.486118] em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00
54 00 20 00 55 00
[ 87.486135] em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00
20 00 46 00 52 00
[ 87.486153] em28xx #0: i2c eeprom a0: 00 00 34 03 54 00 65 00 72 00
72 00 61 00 54 00
[ 87.486170] em28xx #0: i2c eeprom b0: 65 00 63 00 20 00 45 00 6c 00
65 00 63 00 74 00
[ 87.486188] em28xx #0: i2c eeprom c0: 72 00 6f 00 6e 00 69 00 63 00
20 00 47 00 6d 00
[ 87.486206] em28xx #0: i2c eeprom d0: 62 00 48 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 87.486223] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 87.486241] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 87.486260] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xfea8f21d
[ 87.486266] em28xx #0: EEPROM info:
[ 87.486271] em28xx #0: I2S audio, sample rate=32k
[ 87.486276] em28xx #0: 500mA max power
[ 87.486281] em28xx #0: Table at 0x06, strings=0x386a, 0x34a2, 0x0000
[ 87.486970] em28xx #0: Identified as Terratec Hybrid XS Secam (card=51)
[ 87.486983] em28xx #0:
[ 87.486984]
[ 87.486990] em28xx #0: The support for this board weren't valid yet.
[ 87.486996] em28xx #0: Please send a report of having this working
[ 87.487002] em28xx #0: not to V4L mailing list (and/or to other
addresses)
[ 87.487004]
[ 87.507721] msp3400 0-0044: MSP3415G-B8 found @ 0x88 (em28xx #0)
[ 87.507737] msp3400 0-0044: msp3400 supports nicam and radio, mode is
autodetect and autoselect
[ 87.521848] tvp5150 0-005c: chip found @ 0xb8 (em28xx #0)
[ 87.540508] tuner 0-0061: chip found @ 0xc2 (em28xx #0)
[ 87.573389] xc2028 0-0061: creating new instance
[ 87.573400] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 87.573413] usb 2-1: firmware: requesting xc3028-v27.fw
[ 87.636660] xc2028 0-0061: Loading 80 firmware images from
xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 87.685063] xc2028 0-0061: Loading firmware for type=BASE (1), id
0000000000000000.
[ 88.690351] xc2028 0-0061: Loading firmware for type=(0), id
000000000000b700.
[ 88.705224] SCODE (20000000), id 000000000000b700:
[ 88.705235] xc2028 0-0061: Loading SCODE for type=MONO SCODE
HAS_IF_4320 (60008000), id 0000000000008000.
[ 88.888098] em28xx #0: Config register raw data: 0x60
[ 88.888111] em28xx #0: I2S Audio (3 sample rates)
[ 88.888116] em28xx #0: No AC97 audio processor
[ 89.001959] tvp5150 0-005c: tvp5150am1 detected.
[ 89.116049] em28xx #0: v4l2 driver version 0.1.2
[ 89.132359] tvp5150 0-005c: i2c i/o error: rc == -19 (should be 1)
[ 89.135958] msp3400 0-0044: I/O error #0 (read 0x10/0x30)
[ 89.144720] msp3400 0-0044: I/O error #1 (read 0x10/0x30)
[ 89.156582] msp3400 0-0044: I/O error #2 (read 0x10/0x30)
[ 89.168058] msp3400 0-0044: resetting chip, sound will go off.
[ 89.169227] msp3400 0-0044: chip reset failed
[ 89.170704] msp3400 0-0044: chip reset failed
[ 89.214685] em28xx #0: V4L2 device registered as /dev/video1 and
/dev/vbi0
[ 89.242829] usbcore: registered new interface driver snd-usb-audio
[ 89.242843] usbcore: registered new interface driver em28xx
[ 89.242854] em28xx driver loaded
[ 89.353470] tvp5150 0-005c: tvp5150am1 detected.
[ 89.673467] tvp5150 0-005c: tvp5150am1 detected.
There is an error with tvp5150 and with msp3400.
The following Modules are loaded :
em28xx
msp3400
tvp5150
tuner_xc3028
snd_rawmidi
snd_usb_lib
snd_usb_audio
I run openSUSE 11.2 with the very last kernel 2.6.31.12-0.1
Ready to make test.
Regards
Michel.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
