Re: [Patch v2 14/20] media: ti-vpe: cal: Add AM654 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Benoit,

On Mon, Nov 04, 2019 at 01:31:34PM -0600, Benoit Parrot wrote:
> Add the needed control module register bit layout to support the AM654
> family of devices.
> 
> Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
> ---
>  drivers/media/platform/Kconfig      |  2 +-
>  drivers/media/platform/ti-vpe/cal.c | 28 +++++++++++++++++++++++++++-
>  2 files changed, 28 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index e84f35d3a68e..995f4c67f764 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -151,7 +151,7 @@ source "drivers/media/platform/sunxi/Kconfig"
>  config VIDEO_TI_CAL
>  	tristate "TI CAL (Camera Adaptation Layer) driver"
>  	depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> -	depends on SOC_DRA7XX || COMPILE_TEST
> +	depends on SOC_DRA7XX || ARCH_K3 || COMPILE_TEST
>  	select VIDEOBUF2_DMA_CONTIG
>  	select V4L2_FWNODE
>  	help
> diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
> index 72ed2348389d..45653e9ed6cd 100644
> --- a/drivers/media/platform/ti-vpe/cal.c
> +++ b/drivers/media/platform/ti-vpe/cal.c
> @@ -322,6 +322,26 @@ static struct cal_data dra76x_cal_data = {
>  	.flags = 0,
>  };
>  
> +static struct reg_field am654_ctrl_core_csi0_reg_fields[F_MAX_FIELDS] = {
> +	[F_CTRLCLKEN] = REG_FIELD(0, 15, 15),
> +	[F_CAMMODE] = REG_FIELD(0, 24, 25),
> +	[F_LANEENABLE] = REG_FIELD(0, 0, 4),
> +};
> +
> +static struct cal_csi2_phy am654_cal_csi_phy[] = {
> +	{
> +		.base_fields = am654_ctrl_core_csi0_reg_fields,
> +		.num_lanes = 5,
> +	},
> +};
> +
> +static struct cal_data am654_cal_data = {
> +	.csi2_phy_core = am654_cal_csi_phy,
> +	.num_csi2_phy = ARRAY_SIZE(am654_cal_csi_phy),
> +
> +	.flags = 0,

Same comments as on 12th patch.

Could all these structs be const?

> +};
> +
>  /*
>   * there is one cal_dev structure in the driver, it is shared by
>   * all instances.
> @@ -548,7 +568,9 @@ static void camerarx_phy_enable(struct cal_ctx *ctx)
>  	/* Always enable all lanes at the phy control level */
>  	max_lanes = (1 << cal_data_get_phy_max_lanes(ctx)) - 1;
>  	regmap_field_write(phy->fields[F_LANEENABLE], max_lanes);
> -	regmap_field_write(phy->fields[F_CSI_MODE], 1);
> +	/* F_CSI_MODE is not present on every architecture */
> +	if (phy->fields[F_CSI_MODE])
> +		regmap_field_write(phy->fields[F_CSI_MODE], 1);
>  	regmap_field_write(phy->fields[F_CTRLCLKEN], 1);
>  }
>  

-- 
Regards,

Sakari Ailus



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux