Hi, thanks for the replies. > Try card=9, Ok, done: sudo modprobe em28xx card=9 [ 385.566364] Linux video capture interface: v2.00 [ 385.593590] usbcore: registered new interface driver em28xx [ 385.593599] em28xx driver loaded [ 400.104029] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 400.237357] usb 1-6: configuration #1 chosen from 1 choice [ 400.238278] em28xx: New device @ 480 Mbps (eb1a:2820, interface 0, class 0) [ 400.238429] em28xx #0: chip ID is em2820 (or em2710) [ 400.329049] em28xx #0: board has no eeprom [ 400.330173] em28xx #0: Identified as Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 (card=9) [ 400.705185] saa7115 5-0021: saa7114 found (1f7114d0e000000) @ 0x42 (em28xx #0) [ 402.852932] em28xx #0: Config register raw data: 0x00 [ 402.984028] em28xx #0: v4l2 driver version 0.1.2 [ 403.380126] em28xx #0: V4L2 video device registered as video0 Still nothing. > and make sure you have tvtime configured to the correct > video standard *before* starting it up (you may need to run the > tvtime-configure command line tool). Already done before. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html