Based on V4L2 documentations bridge driver must power on and off sub
device explicitly if media-controller mode is not used.
Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
---
drivers/media/platform/ti-vpe/cal.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 42b0063b610e..e61d2f3fd1da 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -1661,6 +1661,12 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
if (ret < 0)
goto err;
+ ret = v4l2_subdev_call(ctx->sensor, core, s_power, 1);
+ if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) {
+ ctx_err(ctx, "power on failed in subdev\n");
+ goto err;
+ }
+
cal_runtime_get(ctx->dev);
csi2_ctx_config(ctx);
@@ -1674,6 +1680,7 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
ret = v4l2_subdev_call(ctx->sensor, video, s_stream, 1);
if (ret) {
+ v4l2_subdev_call(ctx->sensor, core, s_power, 0);
ctx_err(ctx, "stream on failed in subdev\n");
cal_runtime_put(ctx->dev);
goto err;
@@ -1702,6 +1709,7 @@ static void cal_stop_streaming(struct vb2_queue *vq)
struct cal_dmaqueue *dma_q = &ctx->vidq;
struct cal_buffer *buf, *tmp;
unsigned long flags;
+ int ret;
csi2_ppi_disable(ctx);
disable_irqs(ctx);
@@ -1710,6 +1718,10 @@ static void cal_stop_streaming(struct vb2_queue *vq)
if (v4l2_subdev_call(ctx->sensor, video, s_stream, 0))
ctx_err(ctx, "stream off failed in subdev\n");
+ ret = v4l2_subdev_call(ctx->sensor, core, s_power, 0);
+ if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ ctx_err(ctx, "power off failed in subdev\n");
+
/* Release all active buffers */
spin_lock_irqsave(&ctx->slock, flags);
list_for_each_entry_safe(buf, tmp, &dma_q->active, list) {
--
2.17.1
