Hi!
This patch works for me. It disables firmware downloading for the si2157
instead of the si2168.
Convert si2157 and si2168 to kernel-doc format as suggested by Mauro.
Use bits instead of bool. Add a flag to si2157 for not loading the
firmware. Make computation of speed register clear. Add hack for
Logilink VG0022A.
Signed-off-by: Andreas Wendleder <andreas.wendleder@xxxxxxxxx>
diff --git a/drivers/media/dvb-frontends/si2168.h b/drivers/media/dvb-frontends/si2168.h
index 50dccb394efa..ecd21adf8950 100644
--- a/drivers/media/dvb-frontends/si2168.h
+++ b/drivers/media/dvb-frontends/si2168.h
@@ -9,38 +9,43 @@
#define SI2168_H
#include <linux/dvb/frontend.h>
-/*
- * I2C address
- * 0x64
+/**
+ * struct si2168_config - configuration parameters for si2168
+ *
+ * @fe:
+ * frontend returned by driver
+ * @i2c_adapter:
+ * tuner I2C adapter returned by driver
+ * @ts_mode:
+ * Transport Stream mode. Can be:
+ * - %SI2168_TS_PARALLEL
+ * - %SI2168_TS_SERIAL
+ * - %SI2168_TS_TRISTATE
+ * - %SI2168_TS_CLK_MANUAL
+ * @ts_clock_inv:
+ * TS clock inverted
+ * @ts_clock_gapped:
+ * TS clock gapped
+ * @spectral_inversion:
+ * Inverted spectrum
+ *
+ * Note:
+ * The I2C address of this demod is 0x64.
*/
struct si2168_config {
- /*
- * frontend
- * returned by driver
- */
struct dvb_frontend **fe;
-
- /*
- * tuner I2C adapter
- * returned by driver
- */
struct i2c_adapter **i2c_adapter;
- /* TS mode */
#define SI2168_TS_PARALLEL 0x06
#define SI2168_TS_SERIAL 0x03
#define SI2168_TS_TRISTATE 0x00
#define SI2168_TS_CLK_MANUAL 0x20
u8 ts_mode;
- /* TS clock inverted */
- bool ts_clock_inv;
-
- /* TS clock gapped */
- bool ts_clock_gapped;
-
- /* Inverted spectrum */
- bool spectral_inversion;
+ /* Flags */
+ unsigned int ts_clock_inv:1;
+ unsigned int ts_clock_gapped:1;
+ unsigned int spectral_inversion:1;
};
#endif
diff --git a/drivers/media/dvb-frontends/si2168_priv.h b/drivers/media/dvb-frontends/si2168_priv.h
index 804d5b30c697..18bea5222082 100644
--- a/drivers/media/dvb-frontends/si2168_priv.h
+++ b/drivers/media/dvb-frontends/si2168_priv.h
@@ -34,12 +34,12 @@ struct si2168_dev {
unsigned int chip_id;
unsigned int version;
const char *firmware_name;
- bool active;
- bool warm;
u8 ts_mode;
- bool ts_clock_inv;
- bool ts_clock_gapped;
- bool spectral_inversion;
+ unsigned int active:1;
+ unsigned int warm:1;
+ unsigned int ts_clock_inv:1;
+ unsigned int ts_clock_gapped:1;
+ unsigned int spectral_inversion:1;
};
/* firmware command struct */
diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
index e87040d6eca7..898e0f9f8b70 100644
--- a/drivers/media/tuners/si2157.c
+++ b/drivers/media/tuners/si2157.c
@@ -118,6 +118,11 @@ static int si2157_init(struct dvb_frontend *fe)
goto err;
}
+ if (dev->dont_load_firmware) {
+ dev_info(&client->dev, "device is buggy, skipping firmware download\n");
+ goto skip_fw_download;
+ }
+
/* query chip revision */
memcpy(cmd.args, "\x02", 1);
cmd.wlen = 1;
@@ -440,6 +445,7 @@ static int si2157_probe(struct i2c_client *client,
i2c_set_clientdata(client, dev);
dev->fe = cfg->fe;
dev->inversion = cfg->inversion;
+ dev->dont_load_firmware = cfg->dont_load_firmware;
dev->if_port = cfg->if_port;
dev->chiptype = (u8)id->driver_data;
dev->if_frequency = 5000000; /* default value of property 0x0706 */
diff --git a/drivers/media/tuners/si2157.h b/drivers/media/tuners/si2157.h
index c22ca784f43f..ffdece3c2eaa 100644
--- a/drivers/media/tuners/si2157.h
+++ b/drivers/media/tuners/si2157.h
@@ -11,29 +11,34 @@
#include <media/media-device.h>
#include <media/dvb_frontend.h>
-/*
- * I2C address
- * 0x60
+/**
+ * struct si2157_config - configuration parameters for si2157
+ *
+ * @fe:
+ * frontend returned by driver
+ * @mdev:
+ * media device returned by driver
+ * @inversion:
+ * spectral inversion
+ * @dont_load_firmware:
+ * Instead of uploading a new firmware, use the existing one
+ * @if_port:
+ * Port selection
+ * Select the RF interface to use (pins 9+11 or 12+13)
+ *
+ * Note:
+ * The I2C address of this demod is 0x60.
*/
struct si2157_config {
- /*
- * frontend
- */
struct dvb_frontend *fe;
#if defined(CONFIG_MEDIA_CONTROLLER)
struct media_device *mdev;
#endif
- /*
- * Spectral Inversion
- */
- bool inversion;
+ unsigned int inversion:1;
+ unsigned int dont_load_firmware:1;
- /*
- * Port selection
- * Select the RF interface to use (pins 9+11 or 12+13)
- */
u8 if_port;
};
diff --git a/drivers/media/tuners/si2157_priv.h b/drivers/media/tuners/si2157_priv.h
index 2bda903358da..778f81b39996 100644
--- a/drivers/media/tuners/si2157_priv.h
+++ b/drivers/media/tuners/si2157_priv.h
@@ -23,8 +23,9 @@ enum si2157_pads {
struct si2157_dev {
struct mutex i2c_mutex;
struct dvb_frontend *fe;
- bool active;
- bool inversion;
+ unsigned int active:1;
+ unsigned int inversion:1;
+ unsigned int dont_load_firmware:1;
u8 chiptype;
u8 if_port;
u32 if_frequency;
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
index 3afd18733614..792667ee5ebc 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -1197,6 +1197,15 @@ static int af9035_frontend_attach(struct dvb_usb_adapter *adap)
return ret;
}
+/*
+ * The I2C speed register is calculated with:
+ * I2C speed register = (1000000000 / (24.4 * 16 * I2C_speed))
+ *
+ * The default speed register for it930x is 7, with means a
+ * speed of ~366 kbps
+ */
+#define I2C_SPEED_366K 7
+
static int it930x_frontend_attach(struct dvb_usb_adapter *adap)
{
struct state *state = adap_to_priv(adap);
@@ -1208,13 +1217,13 @@ static int it930x_frontend_attach(struct dvb_usb_adapter *adap)
dev_dbg(&intf->dev, "adap->id=%d\n", adap->id);
- /* I2C master bus 2 clock speed 300k */
- ret = af9035_wr_reg(d, 0x00f6a7, 0x07);
+ /* I2C master bus 2 clock speed 366k */
+ ret = af9035_wr_reg(d, 0x00f6a7, I2C_SPEED_366K);
if (ret < 0)
goto err;
- /* I2C master bus 1,3 clock speed 300k */
- ret = af9035_wr_reg(d, 0x00f103, 0x07);
+ /* I2C master bus 1,3 clock speed 366k */
+ ret = af9035_wr_reg(d, 0x00f103, I2C_SPEED_366K);
if (ret < 0)
goto err;
@@ -1610,6 +1619,24 @@ static int it930x_tuner_attach(struct dvb_usb_adapter *adap)
memset(&si2157_config, 0, sizeof(si2157_config));
si2157_config.fe = adap->fe[0];
+
+ /*
+ * HACK: The Logilink VG0022A has a bug: when the si2157
+ * firmware that came with the device is replaced by a new
+ * one, the I2C transfers to the tuner will return just 0xff.
+ *
+ * Probably, the vendor firmware has some patch specifically
+ * designed for this device. So, we can't replace by the
+ * generic firmware. The right solution would be to extract
+ * the si2157 firmware from the original driver and ask the
+ * driver to load the specifically designed firmware, but,
+ * while we don't have that, the next best solution is to just
+ * keep the original firmware at the device.
+ */
+ if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_DEXATEK &&
+ le16_to_cpu(d->udev->descriptor.idProduct) == 0x0100)
+ si2157_config.dont_load_firmware = true;
+
si2157_config.if_port = it930x_addresses_table[state->it930x_addresses].tuner_if_port;
ret = af9035_add_i2c_dev(d, "si2157",
it930x_addresses_table[state->it930x_addresses].tuner_i2c_addr,
@@ -2121,6 +2148,8 @@ static const struct usb_device_id af9035_id_table[] = {
&it930x_props, "ITE 9303 Generic", NULL) },
{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TD310,
&it930x_props, "AVerMedia TD310 DVB-T2", NULL) },
+ { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x0100,
+ &it930x_props, "Logilink VG0022A", NULL) },
{ }
};
MODULE_DEVICE_TABLE(usb, af9035_id_table);
