Use soc_camera_apply_sensor_flags() in mt9v022 to account for any inverters in
video signal paths.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
---
drivers/media/video/mt9v022.c | 17 ++++++++---------
1 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index 91df7ec..1a34d29 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -257,19 +257,18 @@ static int mt9v022_set_bus_param(struct soc_camera_device *icd,
static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd)
{
struct soc_camera_link *icl = to_soc_camera_link(icd);
- unsigned int width_flag;
+ unsigned int flags = SOCAM_MASTER | SOCAM_SLAVE |
+ SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
+ SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW |
+ SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW |
+ SOCAM_DATA_ACTIVE_HIGH;
if (icl->query_bus_param)
- width_flag = icl->query_bus_param(icl) &
- SOCAM_DATAWIDTH_MASK;
+ flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
else
- width_flag = SOCAM_DATAWIDTH_10;
+ flags |= SOCAM_DATAWIDTH_10;
- return SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
- SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW |
- SOCAM_DATA_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_SLAVE |
- width_flag;
+ return soc_camera_apply_sensor_flags(icl, flags);
}
static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
--
1.6.2.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
