Re: [PATCH] media: vimc: Make capture devices and subdevices use different link_validates

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 10/6/19 9:42 PM, Helen Koike wrote:
> Hi Nícolas,
> 
> Thanks for you patch, just some small comments below.
> 
> On 10/6/19 4:14 PM, Nícolas F. R. A. Prado wrote:
>> Instead of validating the links to capture devices and subdevices with
>> the same function, use the default v4l function for links between
>> subdevices and only use a different function for validating between
>> capture device and subdevice.
>> This change should also ease future work to associate multiple mbus
>> codes for the same pixelformat in vimc_pix_map.
>>
>> These changes were tested with 
>> v4l2-compliance SHA: 3f806630e2ecbcebe31872b865c5c4b42f111a99, 64 bits
>> and passed all tests:
>> Grand Total for vimc device /dev/media0: 451, Succeeded: 451, Failed: 0, Warnings: 0
>>
>> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxxx>
>> ---
>>  drivers/media/platform/vimc/vimc-capture.c |  78 +++++++++++++++-
>>  drivers/media/platform/vimc/vimc-common.c  | 103 ++++-----------------
>>  drivers/media/platform/vimc/vimc-common.h  |   3 +
>>  3 files changed, 96 insertions(+), 88 deletions(-)
>>
>> diff --git a/drivers/media/platform/vimc/vimc-capture.c b/drivers/media/platform/vimc/vimc-capture.c
>> index 602f80323031..924b99f82123 100644
>> --- a/drivers/media/platform/vimc/vimc-capture.c
>> +++ b/drivers/media/platform/vimc/vimc-capture.c
>> @@ -321,8 +321,84 @@ static const struct vb2_ops vimc_cap_qops = {
>>  	.wait_finish		= vb2_ops_wait_finish,
>>  };
>>  
>> +int vimc_cap_link_validate(struct media_link *link)
> 
> This function is only used inside the capture, it could be static.

Actually, I was thinking that it is maybe better to leave this function in
vimc-common and rename it to vimc_vdev_link_validate(), as it is generic
to any video_device, and we also avoid to moving it to from vimc-common to
vimc-cap and back to vimc-common again if we add other video devices.

Regards,
Helen

> 
> Unless if you want to make it a generic function in vimc-common.h, so the future
> output device could use it as well, but it can be done in the output patch.
> 
> 
>> +{
>> +	struct v4l2_pix_format source_fmt, sink_fmt;
>> +	int ret;
>> +
>> +	ret = vimc_get_pix_format(link->source, &source_fmt);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = vimc_get_pix_format(link->sink, &sink_fmt);
>> +	if (ret)
>> +		return ret;
>> +
>> +	pr_info("vimc link validate: "
>> +		"%s:src:%dx%d (0x%x, %d, %d, %d, %d) "
>> +		"%s:snk:%dx%d (0x%x, %d, %d, %d, %d)\n",
>> +		/* src */
>> +		link->source->entity->name,
>> +		source_fmt.width, source_fmt.height,
>> +		source_fmt.pixelformat, source_fmt.colorspace,
>> +		source_fmt.quantization, source_fmt.xfer_func,
>> +		source_fmt.ycbcr_enc,
>> +		/* sink */
>> +		link->sink->entity->name,
>> +		sink_fmt.width, sink_fmt.height,
>> +		sink_fmt.pixelformat, sink_fmt.colorspace,
>> +		sink_fmt.quantization, sink_fmt.xfer_func,
>> +		sink_fmt.ycbcr_enc);
>> +
>> +	/* The width, height and pixelformat must match. */
>> +	if (source_fmt.width != sink_fmt.width
>> +	    || source_fmt.height != sink_fmt.height
>> +	    || source_fmt.pixelformat != sink_fmt.pixelformat)
>> +		return -EPIPE;
>> +
>> +	/*
>> +	 * The field order must match, or the sink field order must be NONE
>> +	 * to support interlaced hardware connected to bridges that support
>> +	 * progressive formats only.
>> +	 */
>> +	if (source_fmt.field != sink_fmt.field &&
>> +	    sink_fmt.field != V4L2_FIELD_NONE)
>> +		return -EPIPE;
>> +
>> +	/*
>> +	 * If colorspace is DEFAULT, then assume all the colorimetry is also
>> +	 * DEFAULT, return 0 to skip comparing the other colorimetry parameters
>> +	 */
>> +	if (source_fmt.colorspace == V4L2_COLORSPACE_DEFAULT
>> +	    || sink_fmt.colorspace == V4L2_COLORSPACE_DEFAULT)
>> +		return 0;
>> +
>> +	/* Colorspace must match. */
>> +	if (source_fmt.colorspace != sink_fmt.colorspace)
>> +		return -EPIPE;
>> +
>> +	/* Colorimetry must match if they are not set to DEFAULT */
>> +	if (source_fmt.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT
>> +	    && sink_fmt.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT
>> +	    && source_fmt.ycbcr_enc != sink_fmt.ycbcr_enc)
>> +		return -EPIPE;
>> +
>> +	if (source_fmt.quantization != V4L2_QUANTIZATION_DEFAULT
>> +	    && sink_fmt.quantization != V4L2_QUANTIZATION_DEFAULT
>> +	    && source_fmt.quantization != sink_fmt.quantization)
>> +		return -EPIPE;
>> +
>> +	if (source_fmt.xfer_func != V4L2_XFER_FUNC_DEFAULT
>> +	    && sink_fmt.xfer_func != V4L2_XFER_FUNC_DEFAULT
>> +	    && source_fmt.xfer_func != sink_fmt.xfer_func)
>> +		return -EPIPE;
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(vimc_cap_link_validate);
> 
> No need to export it here.
> 
>> +
>>  static const struct media_entity_operations vimc_cap_mops = {
>> -	.link_validate		= vimc_link_validate,
>> +	.link_validate		= vimc_cap_link_validate,
>>  };
>>  
>>  static void vimc_cap_release(struct video_device *vdev)
>> diff --git a/drivers/media/platform/vimc/vimc-common.c b/drivers/media/platform/vimc/vimc-common.c
>> index a3120f4f7a90..fe91d67811e5 100644
>> --- a/drivers/media/platform/vimc/vimc-common.c
>> +++ b/drivers/media/platform/vimc/vimc-common.c
>> @@ -247,35 +247,40 @@ int vimc_pipeline_s_stream(struct media_entity *ent, int enable)
>>  }
>>  EXPORT_SYMBOL_GPL(vimc_pipeline_s_stream);
>>  
>> -static int vimc_get_mbus_format(struct media_pad *pad,
>> -				struct v4l2_subdev_format *fmt)
>> +int vimc_get_pix_format(struct media_pad *pad,
>> +				struct v4l2_pix_format *fmt)
> 
> Could you align the arguments please?
> 
>>  {
>>  	if (is_media_entity_v4l2_subdev(pad->entity)) {
>>  		struct v4l2_subdev *sd =
>>  			media_entity_to_v4l2_subdev(pad->entity);
>> +		struct v4l2_subdev_format sd_fmt;
>> +		const struct vimc_pix_map *pix_map;
>>  		int ret;
>>  
>> -		fmt->which = V4L2_SUBDEV_FORMAT_ACTIVE;
>> -		fmt->pad = pad->index;
>> +		sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>> +		sd_fmt.pad = pad->index;
>> +
>> +		ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &sd_fmt);
>>  
> 
> Please remove this blank line, so that the error check follows the function.
> 
>> -		ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, fmt);
>>  		if (ret)
>>  			return ret;
>>  
>> +		v4l2_fill_pix_format(fmt, &sd_fmt.format);
>> +
> 
> No need for this blank line.
> 
>> +		pix_map = vimc_pix_map_by_code(sd_fmt.format.code);
>> +		fmt->pixelformat = pix_map->pixelformat;
>> +
> 
> Could you also remove this blank like?
> 
>>  	} else if (is_media_entity_v4l2_video_device(pad->entity)) {
>>  		struct video_device *vdev = container_of(pad->entity,
>>  							 struct video_device,
>>  							 entity);
>>  		struct vimc_ent_device *ved = video_get_drvdata(vdev);
>> -		const struct vimc_pix_map *vpix;
>> -		struct v4l2_pix_format vdev_fmt;
>>  
>>  		if (!ved->vdev_get_format)
>>  			return -ENOIOCTLCMD;
>>  
>> -		ved->vdev_get_format(ved, &vdev_fmt);
>> -		vpix = vimc_pix_map_by_pixelformat(vdev_fmt.pixelformat);
>> -		v4l2_fill_mbus_format(&fmt->format, &vdev_fmt, vpix->code);
>> +		ved->vdev_get_format(ved, fmt);
>> +
> 
> And this one too.
> 
>>  	} else {
>>  		return -EINVAL;
>>  	}
>> @@ -283,84 +288,8 @@ static int vimc_get_mbus_format(struct media_pad *pad,
>>  	return 0;
>>  }
>>  
>> -int vimc_link_validate(struct media_link *link)
>> -{
>> -	struct v4l2_subdev_format source_fmt, sink_fmt;
>> -	int ret;
>> -
>> -	ret = vimc_get_mbus_format(link->source, &source_fmt);
>> -	if (ret)
>> -		return ret;
>> -
>> -	ret = vimc_get_mbus_format(link->sink, &sink_fmt);
>> -	if (ret)
>> -		return ret;
>> -
>> -	pr_info("vimc link validate: "
>> -		"%s:src:%dx%d (0x%x, %d, %d, %d, %d) "
>> -		"%s:snk:%dx%d (0x%x, %d, %d, %d, %d)\n",
>> -		/* src */
>> -		link->source->entity->name,
>> -		source_fmt.format.width, source_fmt.format.height,
>> -		source_fmt.format.code, source_fmt.format.colorspace,
>> -		source_fmt.format.quantization, source_fmt.format.xfer_func,
>> -		source_fmt.format.ycbcr_enc,
>> -		/* sink */
>> -		link->sink->entity->name,
>> -		sink_fmt.format.width, sink_fmt.format.height,
>> -		sink_fmt.format.code, sink_fmt.format.colorspace,
>> -		sink_fmt.format.quantization, sink_fmt.format.xfer_func,
>> -		sink_fmt.format.ycbcr_enc);
>> -
>> -	/* The width, height and code must match. */
>> -	if (source_fmt.format.width != sink_fmt.format.width
>> -	    || source_fmt.format.height != sink_fmt.format.height
>> -	    || source_fmt.format.code != sink_fmt.format.code)
>> -		return -EPIPE;
>> -
>> -	/*
>> -	 * The field order must match, or the sink field order must be NONE
>> -	 * to support interlaced hardware connected to bridges that support
>> -	 * progressive formats only.
>> -	 */
>> -	if (source_fmt.format.field != sink_fmt.format.field &&
>> -	    sink_fmt.format.field != V4L2_FIELD_NONE)
>> -		return -EPIPE;
>> -
>> -	/*
>> -	 * If colorspace is DEFAULT, then assume all the colorimetry is also
>> -	 * DEFAULT, return 0 to skip comparing the other colorimetry parameters
>> -	 */
>> -	if (source_fmt.format.colorspace == V4L2_COLORSPACE_DEFAULT
>> -	    || sink_fmt.format.colorspace == V4L2_COLORSPACE_DEFAULT)
>> -		return 0;
>> -
>> -	/* Colorspace must match. */
>> -	if (source_fmt.format.colorspace != sink_fmt.format.colorspace)
>> -		return -EPIPE;
>> -
>> -	/* Colorimetry must match if they are not set to DEFAULT */
>> -	if (source_fmt.format.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT
>> -	    && sink_fmt.format.ycbcr_enc != V4L2_YCBCR_ENC_DEFAULT
>> -	    && source_fmt.format.ycbcr_enc != sink_fmt.format.ycbcr_enc)
>> -		return -EPIPE;
>> -
>> -	if (source_fmt.format.quantization != V4L2_QUANTIZATION_DEFAULT
>> -	    && sink_fmt.format.quantization != V4L2_QUANTIZATION_DEFAULT
>> -	    && source_fmt.format.quantization != sink_fmt.format.quantization)
>> -		return -EPIPE;
>> -
>> -	if (source_fmt.format.xfer_func != V4L2_XFER_FUNC_DEFAULT
>> -	    && sink_fmt.format.xfer_func != V4L2_XFER_FUNC_DEFAULT
>> -	    && source_fmt.format.xfer_func != sink_fmt.format.xfer_func)
>> -		return -EPIPE;
>> -
>> -	return 0;
>> -}
>> -EXPORT_SYMBOL_GPL(vimc_link_validate);
>> -
>>  static const struct media_entity_operations vimc_ent_sd_mops = {
>> -	.link_validate = vimc_link_validate,
>> +	.link_validate = v4l2_subdev_link_validate,
>>  };
>>  
>>  int vimc_ent_sd_register(struct vimc_ent_device *ved,
>> diff --git a/drivers/media/platform/vimc/vimc-common.h b/drivers/media/platform/vimc/vimc-common.h
>> index 698db7c07645..8a4310430292 100644
>> --- a/drivers/media/platform/vimc/vimc-common.h
>> +++ b/drivers/media/platform/vimc/vimc-common.h
>> @@ -263,6 +263,9 @@ int vimc_ent_sd_register(struct vimc_ent_device *ved,
>>  void vimc_ent_sd_unregister(struct vimc_ent_device *ved,
>>  			    struct v4l2_subdev *sd);
>>  
>> +
>> +int vimc_get_pix_format(struct media_pad *pad, struct v4l2_pix_format *fmt);
>> +
> 
> You don't need this if you make the function static.
> 
>>  /**
>>   * vimc_link_validate - validates a media link
>>   *
>>
> 
> 
> Thanks!
> Helen
> 



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux