Hi Steve, Are you still able to capture from the camera on the imx53-smd board with kernel 5.3.x? I have a custom board with a ADV7180 and it gets detected like this: [ 2.970246] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 2.979741] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 2.988930] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 2.996264] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 3.001685] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.009925] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 3.014659] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 3.019929] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 3.025305] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 3.032039] mmc0: new high speed SDHC card at address aaaa [ 3.038252] imx-media: subdev ipu1_csi0 bound ... [ 24.974982] adv7180 1-0021: chip found @ 0x21 (63fc4000.i2c) [ 25.324516] imx-media: adv7180 1-0021:0 -> ipu1_csi0:0 Then I setup the pipelines: # media-ctl -l "'adv7180 1-0021':0 -> 'ipu1_csi0':[1]" # media-ctl -l "'ipu1_csi0':2 -> 'ipu1_csi0 capture':0[1]" # media-ctl -V "'adv7180 1-0021':0 [fmt:UYVY2X8/720x480 field:seq-bt]" # media-ctl -V "'ipu1_csi0':2 [fmt:AYUV32/720x480]" # gst-launch-1.0 v4l2src ! fakesink Setting pipeline to PAUSED ... Pipeline is live and does not need PREROLL ... Setting pipeline to PLAYING ... New clock: GstSystemClock [ 929.317827] ipu1_csi0: pipeline start failed with -32 ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Failed to allocate required memory. Additional debug info: ../../../gst-plugins-good-1.14.4/sys/v4l2/gstv4l2src.c(658): gst_v4l2src_decide_allocation (): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Buffer pool activation failed Execution ended after 0:00:00.035375819 Setting pipeline to PAUSED ... Setting pipeline to READY ... Setting pipeline to NULL ... Freeing pipeline ... My device tree changes to add the ADV7180 are listed here: http://code.bulix.org/ez8yax-901750 Am I calling the correct media-ctl commands? Any ideas, please? Thanks, Fabio Estevam