This commit fixes an issue seen during yaml check ("make dt_binding_check"). Each enum were not declared as uint32. "Documentation/devicetree/bindings/net/adi,adin.yaml: properties:adi,rx-internal-delay-ps: ..., 'enum': [1600, 1800, 2000, 2200, 2400], 'default': 2000} is not valid under any of the given schemas" Fixes: 767078132ff9 ("dt-bindings: net: add bindings for ADIN PHY driver") Signed-off-by: Alexandre Torgue <alexandre.torgue@xxxxxx> diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml index d95cc691a65f..23e8597acda6 100644 --- a/Documentation/devicetree/bindings/net/adi,adin.yaml +++ b/Documentation/devicetree/bindings/net/adi,adin.yaml @@ -17,6 +17,8 @@ allOf: properties: adi,rx-internal-delay-ps: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" description: | RGMII RX Clock Delay used only when PHY operates in RGMII mode with internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds. @@ -24,6 +26,8 @@ properties: default: 2000 adi,tx-internal-delay-ps: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" description: | RGMII TX Clock Delay used only when PHY operates in RGMII mode with internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds. @@ -31,6 +35,8 @@ properties: default: 2000 adi,fifo-depth-bits: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" description: | When operating in RMII mode, this option configures the FIFO depth. enum: [ 4, 8, 12, 16, 20, 24 ] -- 2.17.1