Em Thu, 3 Oct 2019 12:13:33 +0200
Gonsolo <gonsolo@xxxxxxxxx> escreveu:
> Hi!
>
> > Could you please test the enclosing patch and see if, with that, you
> > can remove the hacks you added for the tuner probe to work?
>
> I tested again on a vanilla media_tree with Mauro's patch attached.
> Doesn't work. Dmesg output:
>
> [ 0.788387] kernel: usb 1-1: new high-speed USB device number 2
> using ehci-pci
> [ 0.792384] kernel: usb 2-1: new high-speed USB device number 2
> using xhci_hcd
> [ 0.944937] kernel: usb 2-1: New USB device found, idVendor=1d19,
> idProduct=0100, bcdDevice= 1.00
> [ 0.944939] kernel: usb 2-1: New USB device strings: Mfr=1,
> Product=2, SerialNumber=3
> [ 0.944940] kernel: usb 2-1: Product: TS Aggregator
> [ 0.944941] kernel: usb 2-1: Manufacturer: ITE Tech., Inc.
> [ 0.944942] kernel: usb 2-1: SerialNumber: AF0102020700001
>
> I then also used the following (additional) patch:
>
> @@ -2119,6 +2122,8 @@ static const struct usb_device_id af9035_id_table[] = {
> /* IT930x devices */
> { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9303,
> &it930x_props, "ITE 9303 Generic", NULL) },
> + { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x0100,
> + &it930x_props, "Logilink VG0022A", NULL) },
> { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TD310,
> &it930x_props, "AVerMedia TD310 DVB-T2", NULL) },
> { }
>
> Which gives the following output:
>
> [ 5.380989] si2168 1-0067: Silicon Labs Si2168-B40 successfully identified
> [ 5.380991] si2168 1-0067: firmware version: B 4.0.2
> [ 5.381013] usb 2-1: DVB: registering adapter 0 frontend 0 (Silicon
> Labs Si2168)...
> [ 5.381018] dvbdev: dvb_create_media_entity: media entity 'Silicon
> Labs Si2168' registered.
> [ 5.390058] checking generic (e0000000 410000) vs hw (e0000000 10000000)
> [ 5.390062] fb0: switching to inteldrmfb from EFI VGA
> [ 5.390268] Console: switching to colour dummy device 80x25
> [ 5.390281] i915 0000:00:02.0: vgaarb: deactivate vga console
> [ 5.393438] si2157 2-0063: Silicon Labs Si2147/2148/2157/2158
> successfully attached
Ok. It sounds that the issues you're facing are indeed related to timing
conditions.
>
> But when I try to use VLC I get the following:
>
> [ 457.677363] si2168 1-0067: downloading firmware from file
> 'dvb-demod-si2168-b40-01.fw'
> [ 458.631034] si2168 1-0067: firmware version: B 4.0.11
> [ 458.650309] si2157 2-0063: unknown chip version Si21255-\xff\xff\xff
>
> Now I'm trying other timings.
Returning 0xff, 0xff, 0xff, ... usually means that the tuner chip didn't
respond in time.
This could indicate:
1) The device requires more time to go to sane state after firmware
load and/or device reset/power up;
2) Tuner may be using I2C clock stretching, but the bridge doesn't
support it.
3) The clock used at the I2C bus is still too high;
4) The tuner is hidden by an I2C gate.
I think that using the standard I2C bus clock of 100kbps should be
enough.
I2C clock stretching seems to be unlikely for a command that it is
just getting the device's version.
What seems more likely is that this device may need some time after
firmware load to start working.
So, I would add a msleep() somewhere after the firmware update.
Thanks,
Mauro
