Hi Mauro, On 10/2/19 10:16 AM, Jenkins Builder Robot wrote: > See <https://builder.linuxtv.org/job/v4l-utils/43/display/redirect?page=changes> > > Changes: > > [hverkuil-cisco] keytable: add new generated keymaps > > [hverkuil-cisco] msg2ctl.pl: add newline after log_msg > > [hverkuil-cisco] cec-follower: drop the hardcoded UI commands list > > [hverkuil-cisco] cec-ctl/cec-log: use new CEC_OP_UI_CMD defines You need to remove utils/cec-follower/cec-log.h. This file was generated but the generated file is now called cec-log-gen.h. A new cec-log.h was also added to utils/common as a companion to cec-log.cpp. Unfortunately, the old cec-log.h clashes with the new cec-log.h. And since the old cec-log.h was generated and so is not part of the git repo it is not removed as part of a 'git pull'. Anyway, just remove utils/cec-follower/cec-log.h and it compiles again. Regards, Hans > > > ------------------------------------------ > [...truncated 1.10 MB...] > ^~~~~~~ > log_msg > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:800:16: error: ‘arg_u8’ was not declared in this scope > #define arg_on arg_u8 > ^~~~~~ > ./cec-log.h:2584:12: note: in expansion of macro ‘arg_on’ > log_arg(&arg_on, "on", on); > ^~~~~~ > ./cec-log.h:800:16: note: suggested alternative: ‘arg_on’ > #define arg_on arg_u8 > ^~~~~~ > ./cec-log.h:2584:12: note: in expansion of macro ‘arg_on’ > log_arg(&arg_on, "on", on); > ^~~~~~ > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:2584:3: error: ‘log_arg’ was not declared in this scope > log_arg(&arg_on, "on", on); > ^~~~~~~ > ./cec-log.h:2584:3: note: suggested alternative: ‘log_msg’ > log_arg(&arg_on, "on", on); > ^~~~~~~ > log_msg > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:800:16: error: ‘arg_u8’ was not declared in this scope > #define arg_on arg_u8 > ^~~~~~ > ./cec-log.h:2594:12: note: in expansion of macro ‘arg_on’ > log_arg(&arg_on, "on", on); > ^~~~~~ > ./cec-log.h:800:16: note: suggested alternative: ‘arg_on’ > #define arg_on arg_u8 > ^~~~~~ > ./cec-log.h:2594:12: note: in expansion of macro ‘arg_on’ > log_arg(&arg_on, "on", on); > ^~~~~~ > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:2594:3: error: ‘log_arg’ was not declared in this scope > log_arg(&arg_on, "on", on); > ^~~~~~~ > ./cec-log.h:2594:3: note: suggested alternative: ‘log_msg’ > log_arg(&arg_on, "on", on); > ^~~~~~~ > log_msg > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:818:21: error: ‘arg_u8’ was not declared in this scope > #define arg_minutes arg_u8 > ^~~~~~ > ./cec-log.h:2603:12: note: in expansion of macro ‘arg_minutes’ > log_arg(&arg_minutes, "minutes", minutes); > ^~~~~~~~~~~ > ./cec-log.h:818:21: note: suggested alternative: ‘arg_on’ > #define arg_minutes arg_u8 > ^~~~~~ > ./cec-log.h:2603:12: note: in expansion of macro ‘arg_minutes’ > log_arg(&arg_minutes, "minutes", minutes); > ^~~~~~~~~~~ > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:2603:3: error: ‘log_arg’ was not declared in this scope > log_arg(&arg_minutes, "minutes", minutes); > ^~~~~~~ > ./cec-log.h:2603:3: note: suggested alternative: ‘log_msg’ > log_arg(&arg_minutes, "minutes", minutes); > ^~~~~~~ > log_msg > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:811:18: error: ‘arg_string’ was not declared in this scope > #define arg_time arg_string > ^~~~~~~~~~ > ./cec-log.h:2611:12: note: in expansion of macro ‘arg_time’ > log_arg(&arg_time, "time", time); > ^~~~~~~~ > ./cec-log.h:811:18: note: suggested alternative: ‘arg_time’ > #define arg_time arg_string > ^~~~~~~~~~ > ./cec-log.h:2611:12: note: in expansion of macro ‘arg_time’ > log_arg(&arg_time, "time", time); > ^~~~~~~~ > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:2611:3: error: ‘log_arg’ was not declared in this scope > log_arg(&arg_time, "time", time); > ^~~~~~~ > ./cec-log.h:2611:3: note: suggested alternative: ‘log_msg’ > log_arg(&arg_time, "time", time); > ^~~~~~~ > log_msg > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:811:18: error: ‘arg_string’ was not declared in this scope > #define arg_time arg_string > ^~~~~~~~~~ > ./cec-log.h:2619:12: note: in expansion of macro ‘arg_time’ > log_arg(&arg_time, "time", time); > ^~~~~~~~ > ./cec-log.h:811:18: note: suggested alternative: ‘arg_time’ > #define arg_time arg_string > ^~~~~~~~~~ > ./cec-log.h:2619:12: note: in expansion of macro ‘arg_time’ > log_arg(&arg_time, "time", time); > ^~~~~~~~ > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:2619:3: error: ‘log_arg’ was not declared in this scope > log_arg(&arg_time, "time", time); > ^~~~~~~ > ./cec-log.h:2619:3: note: suggested alternative: ‘log_msg’ > log_arg(&arg_time, "time", time); > ^~~~~~~ > log_msg > ./cec-log.h:2630:3: error: ‘log_arg’ was not declared in this scope > log_arg(&arg_htng_input_src, "htng-input-src", htng_input_src); > ^~~~~~~ > ./cec-log.h:2630:3: note: suggested alternative: ‘log_msg’ > log_arg(&arg_htng_input_src, "htng-input-src", htng_input_src); > ^~~~~~~ > log_msg > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:579:19: error: ‘arg_u16’ was not declared in this scope > #define arg_major arg_u16 > ^~~~~~~ > ./cec-log.h:2632:12: note: in expansion of macro ‘arg_major’ > log_arg(&arg_major, "major", major); > ^~~~~~~~~ > ./cec-log.h:579:19: note: suggested alternative: ‘arg_osd’ > #define arg_major arg_u16 > ^~~~~~~ > ./cec-log.h:2632:12: note: in expansion of macro ‘arg_major’ > log_arg(&arg_major, "major", major); > ^~~~~~~~~ > ./cec-log.h:801:17: error: ‘arg_u8’ was not declared in this scope > #define arg_vol arg_u8 > ^~~~~~ > ./cec-log.h:2642:12: note: in expansion of macro ‘arg_vol’ > log_arg(&arg_vol, "vol", vol); > ^~~~~~~ > ./cec-log.h:801:17: note: suggested alternative: ‘arg_on’ > #define arg_vol arg_u8 > ^~~~~~ > ./cec-log.h:2642:12: note: in expansion of macro ‘arg_vol’ > log_arg(&arg_vol, "vol", vol); > ^~~~~~~ > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:2642:3: error: ‘log_arg’ was not declared in this scope > log_arg(&arg_vol, "vol", vol); > ^~~~~~~ > ./cec-log.h:2642:3: note: suggested alternative: ‘log_msg’ > log_arg(&arg_vol, "vol", vol); > ^~~~~~~ > log_msg > ./cec-log.h:2662:3: error: ‘log_arg’ was not declared in this scope > log_arg(&arg_htng_chan_type, "htng-chan-type", htng_chan_type); > ^~~~~~~ > ./cec-log.h:2662:3: note: suggested alternative: ‘log_msg’ > log_arg(&arg_htng_chan_type, "htng-chan-type", htng_chan_type); > ^~~~~~~ > log_msg > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:831:18: error: ‘arg_u16’ was not declared in this scope > #define arg_freq arg_u16 > ^~~~~~~ > ./cec-log.h:2665:12: note: in expansion of macro ‘arg_freq’ > log_arg(&arg_freq, "freq", freq); > ^~~~~~~~ > ./cec-log.h:831:18: note: suggested alternative: ‘arg_osd’ > #define arg_freq arg_u16 > ^~~~~~~ > ./cec-log.h:2665:12: note: in expansion of macro ‘arg_freq’ > log_arg(&arg_freq, "freq", freq); > ^~~~~~~~ > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:2679:3: error: ‘log_arg’ was not declared in this scope > log_arg(&arg_htng_chan_type, "htng-chan-type", htng_chan_type); > ^~~~~~~ > ./cec-log.h:2679:3: note: suggested alternative: ‘log_msg’ > log_arg(&arg_htng_chan_type, "htng-chan-type", htng_chan_type); > ^~~~~~~ > log_msg > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:792:18: error: ‘arg_u16’ was not declared in this scope > #define arg_chan arg_u16 > ^~~~~~~ > ./cec-log.h:2681:12: note: in expansion of macro ‘arg_chan’ > log_arg(&arg_chan, "chan", chan); > ^~~~~~~~ > ./cec-log.h:792:18: note: suggested alternative: ‘arg_osd’ > #define arg_chan arg_u16 > ^~~~~~~ > ./cec-log.h:2681:12: note: in expansion of macro ‘arg_chan’ > log_arg(&arg_chan, "chan", chan); > ^~~~~~~~ > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:2702:3: error: ‘log_arg’ was not declared in this scope > log_arg(&arg_htng_ext_chan_type, "htng-ext-chan-type", htng_ext_chan_type); > ^~~~~~~ > ./cec-log.h:2702:3: note: suggested alternative: ‘log_msg’ > log_arg(&arg_htng_ext_chan_type, "htng-ext-chan-type", htng_ext_chan_type); > ^~~~~~~ > log_msg > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:831:18: error: ‘arg_u16’ was not declared in this scope > #define arg_freq arg_u16 > ^~~~~~~ > ./cec-log.h:2705:12: note: in expansion of macro ‘arg_freq’ > log_arg(&arg_freq, "freq", freq); > ^~~~~~~~ > ./cec-log.h:831:18: note: suggested alternative: ‘arg_osd’ > #define arg_freq arg_u16 > ^~~~~~~ > ./cec-log.h:2705:12: note: in expansion of macro ‘arg_freq’ > log_arg(&arg_freq, "freq", freq); > ^~~~~~~~ > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h:2719:3: error: ‘log_htng_unknown_msg’ was not declared in this scope > log_htng_unknown_msg(msg); > ^~~~~~~~~~~~~~~~~~~~ > ./cec-log.h:2719:3: note: suggested alternative: ‘log_htng_msg’ > log_htng_unknown_msg(msg); > ^~~~~~~~~~~~~~~~~~~~ > log_htng_msg > In file included from cec-follower.h:25, > from cec-follower.cpp:21: > ./cec-log.h: At global scope: > ./cec-log.h:861:29: warning: ‘messages’ defined but not used [-Wunused-variable] > static const struct message messages[] = { > ^~~~~~~~ > make[3]: *** [Makefile:607: cec_follower-cec-follower.o] Error 1 > make[3]: Leaving directory '<https://builder.linuxtv.org/job/v4l-utils/ws/utils/cec-follower'> > make[2]: *** [Makefile:481: all-recursive] Error 1 > make[2]: Leaving directory '<https://builder.linuxtv.org/job/v4l-utils/ws/utils'> > make[1]: *** [Makefile:590: all-recursive] Error 1 > make[1]: Leaving directory '<https://builder.linuxtv.org/job/v4l-utils/ws/'> > make: *** [Makefile:517: all] Error 2 > Build step 'Execute shell' marked build as failure >
