On 9/27/19 12:57 PM, Marco Felsch wrote:
> Hi Hans,
>
> On 19-09-27 11:01, Hans Verkuil wrote:
>> On 8/30/19 12:16 PM, Marco Felsch wrote:
>>> Since commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops")
>>> the 'which' field for set/get_selection must be FORMAT_ACTIVE. There is
>>> no way to try different selections. The patch adds a helper function to
>>> select the correct selection memory space (sub-device file handle or
>>> driver state) which will be set/returned.
>>>
>>> The selection rectangle is updated if the format is FORMAT_ACTIVE and
>>> the rectangle position and/or size differs from the current set
>>> rectangle.
>>>
>>> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
>>
>> One checkpatch warning:
>>
>> CHECK: Alignment should match open parenthesis
>> #170: FILE: drivers/media/i2c/tvp5150.c:1155:
>> + crop = __tvp5150_get_pad_crop(decoder, cfg, sel->pad,
>> + sel->which);
>>
>> I'd have fixed this myself, but since there are some changes needed
>> elsewhere, you can pick this up as well for a v11.
>>
>> And some more comments below:
>>
>>> ---
>>> Changelog:
>>>
>>> v10:
>>> - __tvp5150_get_pad_crop: drop confusing fall-through
>>> - set_selection: fix FORMAT_TRY handling if CONFIG_VIDEO_V4L2_SUBDEV_API
>>> is disabled. Adapt sel->r and return 0.
>>> v8:
>>> - adapt commit message
>>> - remove wrong FORMAT_TRY handling for tvp5150_fill_fmt() handling
>>> - return 0 during set_selection if FORMAT_TRY was requested and
>>> CONFIG_VIDEO_V4L2_SUBDEV_API is disabled
>>> - return -EINVAL during get_selection if FORMAT_TRY was requested and
>>> CONFIG_VIDEO_V4L2_SUBDEV_API is disabled
>>> v7:
>>> - __tvp5150_get_pad_crop(): return error on default case
>>> - simplify __tvp5150_get_pad_crop() error handling
>>> - tvp5150_set_selection() squash __tvp5150_set_selection() execution
>>> conditions
>>> v6:
>>> nothing
>>> v5:
>>> - handle stub for v4l2_subdev_get_try_crop() internal since commit
>>> ("media: v4l2-subdev: add stubs for v4l2_subdev_get_try_*")
>>> isn't anymore part of this series.
>>> - add error handling of __tvp5150_get_pad_crop()
>>> v4:
>>> - fix merge conflict due to rebase on top of media-tree/master
>>> - __tvp5150_get_pad_crop(): cosmetic alignment fixes
>>>
>>> drivers/media/i2c/tvp5150.c | 113 ++++++++++++++++++++++++++----------
>>> 1 file changed, 81 insertions(+), 32 deletions(-)
>>>
>>> diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
>>> index c1542a89e8c8..636e8737ac44 100644
>>> --- a/drivers/media/i2c/tvp5150.c
>>> +++ b/drivers/media/i2c/tvp5150.c
>>> @@ -19,6 +19,7 @@
>>> #include <media/v4l2-ctrls.h>
>>> #include <media/v4l2-fwnode.h>
>>> #include <media/v4l2-mc.h>
>>> +#include <media/v4l2-rect.h>
>>>
>>> #include "tvp5150_reg.h"
>>>
>>> @@ -995,6 +996,25 @@ static void tvp5150_set_default(v4l2_std_id std, struct v4l2_rect *crop)
>>> crop->height = TVP5150_V_MAX_OTHERS;
>>> }
>>>
>>> +static struct v4l2_rect *
>>> +__tvp5150_get_pad_crop(struct tvp5150 *decoder,
>>> + struct v4l2_subdev_pad_config *cfg, unsigned int pad,
>>> + enum v4l2_subdev_format_whence which)
>>
>> Please don't use __ in the function name. Double underscores should never be
>> used in C code since that's reserved for use by the compiler. What's wrong
>> with just plain tvp5150_get_pad_crop()?
>
> I tought it is common at least within the v4l subsystem. There are a
> few other drivers following that __ pattern. Anyway I can rename it ;)
I think it is used too much in our code, generally for no good reason.
In this case there is no reason whatsoever that would warrant adding a __ prefix.
Regards,
Hans
>
>>> +{
>>> + switch (which) {
>>> + case V4L2_SUBDEV_FORMAT_ACTIVE:
>>> + return &decoder->rect;
>>> + case V4L2_SUBDEV_FORMAT_TRY:
>>> +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
>>> + return v4l2_subdev_get_try_crop(&decoder->sd, cfg, pad);
>>> +#else
>>> + return ERR_PTR(-EINVAL);
>>> +#endif
>>> + default:
>>> + return ERR_PTR(-EINVAL);
>>> + }
>>> +}
>>> +
>>> static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
>>> struct v4l2_subdev_pad_config *cfg,
>>> struct v4l2_subdev_format *format)
>>> @@ -1019,17 +1039,51 @@ static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
>>> return 0;
>>> }
>>>
>>> +unsigned int tvp5150_get_hmax(struct v4l2_subdev *sd)
>>> +{
>>> + struct tvp5150 *decoder = to_tvp5150(sd);
>>> + v4l2_std_id std;
>>> +
>>> + /* Calculate height based on current standard */
>>> + if (decoder->norm == V4L2_STD_ALL)
>>> + std = tvp5150_read_std(sd);
>>> + else
>>> + std = decoder->norm;
>>> +
>>> + return (std & V4L2_STD_525_60) ?
>>> + TVP5150_V_MAX_525_60 : TVP5150_V_MAX_OTHERS;
>>> +}
>>> +
>>> +static inline void
>>> +__tvp5150_set_selection(struct v4l2_subdev *sd, struct v4l2_rect *rect)
>>
>> You can drop 'inline', there is no need for that.
>>
>> I'd also rename the function to something more understandable. E.g.
>> tvp5150_set_hw_selection().
>
> Okay I will change that.
>
> Regards,
> Marco
>
>>
>>> +{
>>> + struct tvp5150 *decoder = to_tvp5150(sd);
>>> + unsigned int hmax = tvp5150_get_hmax(sd);
>>> +
>>> + regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect->top);
>>> + regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
>>> + rect->top + rect->height - hmax);
>>> + regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
>>> + rect->left >> TVP5150_CROP_SHIFT);
>>> + regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
>>> + rect->left | (1 << TVP5150_CROP_SHIFT));
>>> + regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
>>> + (rect->left + rect->width - TVP5150_MAX_CROP_LEFT) >>
>>> + TVP5150_CROP_SHIFT);
>>> + regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
>>> + rect->left + rect->width - TVP5150_MAX_CROP_LEFT);
>>> +}
>>> +
>>> static int tvp5150_set_selection(struct v4l2_subdev *sd,
>>> struct v4l2_subdev_pad_config *cfg,
>>> struct v4l2_subdev_selection *sel)
>>> {
>>> struct tvp5150 *decoder = to_tvp5150(sd);
>>> struct v4l2_rect *rect = &sel->r;
>>> - v4l2_std_id std;
>>> - int hmax;
>>> + struct v4l2_rect *crop;
>>> + unsigned int hmax;
>>>
>>> - if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
>>> - sel->target != V4L2_SEL_TGT_CROP)
>>> + if (sel->target != V4L2_SEL_TGT_CROP)
>>> return -EINVAL;
>>>
>>> dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d, height=%d\n",
>>> @@ -1038,17 +1092,7 @@ static int tvp5150_set_selection(struct v4l2_subdev *sd,
>>> /* tvp5150 has some special limits */
>>> rect->left = clamp(rect->left, 0, TVP5150_MAX_CROP_LEFT);
>>> rect->top = clamp(rect->top, 0, TVP5150_MAX_CROP_TOP);
>>> -
>>> - /* Calculate height based on current standard */
>>> - if (decoder->norm == V4L2_STD_ALL)
>>> - std = tvp5150_read_std(sd);
>>> - else
>>> - std = decoder->norm;
>>> -
>>> - if (std & V4L2_STD_525_60)
>>> - hmax = TVP5150_V_MAX_525_60;
>>> - else
>>> - hmax = TVP5150_V_MAX_OTHERS;
>>> + hmax = tvp5150_get_hmax(sd);
>>>
>>> /*
>>> * alignments:
>>> @@ -1061,20 +1105,23 @@ static int tvp5150_set_selection(struct v4l2_subdev *sd,
>>> hmax - TVP5150_MAX_CROP_TOP - rect->top,
>>> hmax - rect->top, 0, 0);
>>>
>>> - regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect->top);
>>> - regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
>>> - rect->top + rect->height - hmax);
>>> - regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
>>> - rect->left >> TVP5150_CROP_SHIFT);
>>> - regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
>>> - rect->left | (1 << TVP5150_CROP_SHIFT));
>>> - regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
>>> - (rect->left + rect->width - TVP5150_MAX_CROP_LEFT) >>
>>> - TVP5150_CROP_SHIFT);
>>> - regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
>>> - rect->left + rect->width - TVP5150_MAX_CROP_LEFT);
>>> + if (!IS_ENABLED(CONFIG_VIDEO_V4L2_SUBDEV_API) &&
>>> + sel->which == V4L2_SUBDEV_FORMAT_TRY)
>>> + return 0;
>>> +
>>> + crop = __tvp5150_get_pad_crop(decoder, cfg, sel->pad, sel->which);
>>> + if (IS_ERR(crop))
>>> + return PTR_ERR(crop);
>>> +
>>> + /*
>>> + * Update output image size if the selection (crop) rectangle size or
>>> + * position has been modified.
>>> + */
>>> + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE &&
>>> + !v4l2_rect_equal(rect, crop))
>>> + __tvp5150_set_selection(sd, rect);
>>>
>>> - decoder->rect = *rect;
>>> + *crop = *rect;
>>>
>>> return 0;
>>> }
>>> @@ -1084,11 +1131,9 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
>>> struct v4l2_subdev_selection *sel)
>>> {
>>> struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
>>> + struct v4l2_rect *crop;
>>> v4l2_std_id std;
>>>
>>> - if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
>>> - return -EINVAL;
>>> -
>>> switch (sel->target) {
>>> case V4L2_SEL_TGT_CROP_BOUNDS:
>>> sel->r.left = 0;
>>> @@ -1106,7 +1151,11 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
>>> sel->r.height = TVP5150_V_MAX_OTHERS;
>>> return 0;
>>> case V4L2_SEL_TGT_CROP:
>>> - sel->r = decoder->rect;
>>> + crop = __tvp5150_get_pad_crop(decoder, cfg, sel->pad,
>>> + sel->which);
>>> + if (IS_ERR(crop))
>>> + return PTR_ERR(crop);
>>> + sel->r = *crop;
>>> return 0;
>>> default:
>>> return -EINVAL;
>>>
>>
>> Regards,
>>
>> Hans
>>
>
