Hi Tomasz,
I appreciate your helpful comments.
On Tue, 2019-09-10 at 13:04 +0900, Tomasz Figa wrote:
> Hi Frederic,
>
> On Tue, Sep 10, 2019 at 4:23 AM <frederic.chen@xxxxxxxxxxxx> wrote:
> >
> > From: Frederic Chen <frederic.chen@xxxxxxxxxxxx>
> >
> > This patch adds the driver of Digital Image Processing (DIP)
> > unit in Mediatek ISP system, providing image format
> > conversion, resizing, and rotation features.
> >
> > The mtk-isp directory will contain drivers for multiple IP
> > blocks found in Mediatek ISP system. It will include ISP
> > Pass 1 driver(CAM), sensor interface driver, DIP driver and
> > face detection driver.
> >
> > Signed-off-by: Frederic Chen <frederic.chen@xxxxxxxxxxxx>
> > ---
> > drivers/media/platform/mtk-isp/Makefile | 7 +
> > .../media/platform/mtk-isp/isp_50/Makefile | 7 +
> > .../platform/mtk-isp/isp_50/dip/Makefile | 18 +
> > .../platform/mtk-isp/isp_50/dip/mtk_dip-dev.c | 650 +++++
> > .../platform/mtk-isp/isp_50/dip/mtk_dip-dev.h | 566 +++++
> > .../platform/mtk-isp/isp_50/dip/mtk_dip-hw.h | 156 ++
> > .../platform/mtk-isp/isp_50/dip/mtk_dip-sys.c | 521 ++++
> > .../mtk-isp/isp_50/dip/mtk_dip-v4l2.c | 2255 +++++++++++++++++
> > 8 files changed, 4180 insertions(+)
> > create mode 100644 drivers/media/platform/mtk-isp/Makefile
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/Makefile
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/Makefile
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c
> >
>
> Thanks for sending v3!
>
> I'm going to do a full review a bit later, but please check one
> comment about power handling below.
>
> Other than that one comment, from a quick look, I think we only have a
> number of style issues left. Thanks for the hard work!
>
> [snip]
> > +static void dip_runner_func(struct work_struct *work)
> > +{
> > + struct mtk_dip_request *req = mtk_dip_hw_mdp_work_to_req(work);
> > + struct mtk_dip_dev *dip_dev = req->dip_pipe->dip_dev;
> > + struct img_config *config_data =
> > + (struct img_config *)req->working_buf->config_data.vaddr;
> > +
> > + /*
> > + * Call MDP/GCE API to do HW excecution
> > + * Pass the framejob to MDP driver
> > + */
> > + pm_runtime_get_sync(dip_dev->dev);
> > + mdp_cmdq_sendtask(dip_dev->mdp_pdev, config_data,
> > + &req->img_fparam.frameparam, NULL, false,
> > + dip_mdp_cb_func, req);
> > +}
> [snip]
> > +static void dip_composer_workfunc(struct work_struct *work)
> > +{
> > + struct mtk_dip_request *req = mtk_dip_hw_fw_work_to_req(work);
> > + struct mtk_dip_dev *dip_dev = req->dip_pipe->dip_dev;
> > + struct img_ipi_param ipi_param;
> > + struct mtk_dip_hw_subframe *buf;
> > + int ret;
> > +
> > + down(&dip_dev->sem);
> > +
> > + buf = mtk_dip_hw_working_buf_alloc(req->dip_pipe->dip_dev);
> > + if (!buf) {
> > + dev_err(req->dip_pipe->dip_dev->dev,
> > + "%s:%s:req(%p): no free working buffer available\n",
> > + __func__, req->dip_pipe->desc->name, req);
> > + }
> > +
> > + req->working_buf = buf;
> > + mtk_dip_wbuf_to_ipi_img_addr(&req->img_fparam.frameparam.subfrm_data,
> > + &buf->buffer);
> > + memset(buf->buffer.vaddr, 0, DIP_SUB_FRM_SZ);
> > + mtk_dip_wbuf_to_ipi_img_sw_addr(&req->img_fparam.frameparam.config_data,
> > + &buf->config_data);
> > + memset(buf->config_data.vaddr, 0, DIP_COMP_SZ);
> > +
> > + if (!req->img_fparam.frameparam.tuning_data.present) {
> > + /*
> > + * When user enqueued without tuning buffer,
> > + * it would use driver internal buffer.
> > + */
> > + dev_dbg(dip_dev->dev,
> > + "%s: frame_no(%d) has no tuning_data\n",
> > + __func__, req->img_fparam.frameparam.frame_no);
> > +
> > + mtk_dip_wbuf_to_ipi_tuning_addr
> > + (&req->img_fparam.frameparam.tuning_data,
> > + &buf->tuning_buf);
> > + memset(buf->tuning_buf.vaddr, 0, DIP_TUNING_SZ);
> > + }
> > +
> > + mtk_dip_wbuf_to_ipi_img_sw_addr(&req->img_fparam.frameparam.self_data,
> > + &buf->frameparam);
> > + memcpy(buf->frameparam.vaddr, &req->img_fparam.frameparam,
> > + sizeof(req->img_fparam.frameparam));
> > + ipi_param.usage = IMG_IPI_FRAME;
> > + ipi_param.frm_param.handle = req->id;
> > + ipi_param.frm_param.scp_addr = (u32)buf->frameparam.scp_daddr;
> > +
> > + mutex_lock(&dip_dev->hw_op_lock);
> > + atomic_inc(&dip_dev->num_composing);
> > + ret = scp_ipi_send(dip_dev->scp_pdev, SCP_IPI_DIP, &ipi_param,
> > + sizeof(ipi_param), 0);
>
> We're not holding the pm_runtime enable count here
> (pm_runtime_get_sync() wasn't called), so rproc_shutdown() might have
> been called. Wouldn't that affect the ability for this IPI to run?
>
> We had a related discussion with Jerry on the FD series and I think
> the conclusion is:
> a) if there is any state that needs to be preserved between jobs, that
> would be cleared by rproc_shutdown() then we need to call
> rproc_boot/shutdown() when we start/stop streaming.
> b) it there is no such state, we can keep them inside runtime PM
> callbacks, but we need to call pm_runtime_get_sync() before sending an
> IPI and pm_runtime_mark_last_busy() + pm_runtime_put_autosuspend()
> after the SCP signals completion. In this case the runtime PM
> autosuspend delay should be set to around 2-3 times the delay needed
> for rproc_shutdown() + rproc_boot() to complete.
Since each IMG_IPI_FRAME command is stateless, I would like to
use pm_runtime_get_sync()/ pm_runtime_mark_last_busy()/
pm_runtime_put_autosuspend() to fix this issue (solution b).
>
> Best regards,
> Tomasz
Sincerely,
Frederic Chen
