Re: [V1, 1/2] media: dt-bindings: media: i2c: Add bindings for ov8856

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sakari,

On Thu, 2019-08-08 at 19:54 +0300, Sakari Ailus wrote:
> Hi Dongchun,
> 
> (Cc'ing Ben, too.)
> 
> On Thu, Aug 08, 2019 at 05:22:14PM +0800, dongchun.zhu@xxxxxxxxxxxx wrote:
> > From: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
> > 
> > Add device tree binding documentation for the ov8856 camera sensor.
> > 
> > Signed-off-by: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/media/i2c/ov8856.txt       | 41 ++++++++++++++++++++++
> >  MAINTAINERS                                        |  1 +
> >  2 files changed, 42 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.txt b/Documentation/devicetree/bindings/media/i2c/ov8856.txt
> > new file mode 100644
> > index 0000000..96b10e0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.txt
> > @@ -0,0 +1,41 @@
> > +* Omnivision OV8856 MIPI CSI-2 sensor
> > +
> > +Required Properties:
> > +- compatible: shall be "ovti,ov8856"
> > +- clocks: reference to the xvclk input clock
> > +- clock-names: shall be "xvclk"
> 
> Could you add "clock-frequency" property here, please, and specify the
> upper and lower limits?
> 

Sorry, this frequency of the external clock to the sensor and
link-frequencies would be added in DT in next release.

> > +- avdd-supply: Analog voltage supply, 2.8 volts
> > +- dovdd-supply: Digital I/O voltage supply, 1.8 volts
> > +- dvdd-supply: Digital core voltage supply, 1.2 volts
> > +- reset-gpios: Low active reset gpio
> > +
> > +The device node shall contain one 'port' child node with an
> > +'endpoint' subnode for its digital output video port,
> > +in accordance with the video interface bindings defined in
> > +Documentation/devicetree/bindings/media/video-interfaces.txt.
> > +The endpoint optional property 'data-lanes' shall be "<0 1 3 4>".
> 
> If you don't support lane reordering, then monotonically incrementing lane
> numbers from 1 onwards are recommended.
> 
> Please also make the property mandatory.
> 

data-lanes would be required property on endpoint in next release.

> > +
> > +Example:
> > +&i2c7 {
> > +	ov8856: camera-sensor@10 {
> > +		compatible = "ovti,ov8856";
> > +		reg = <0x10>;
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&clk_24m_cam>;
> > +
> > +		clocks = <&cru SCLK_TESTCLKOUT1>;
> > +		clock-names = "xvclk";
> > +
> > +		avdd-supply = <&mt6358_vcama2_reg>;
> > +		dvdd-supply = <&mt6358_vcamd_reg>;
> > +		dovdd-supply = <&mt6358_vcamio_reg>;
> > +		reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
> > +
> > +		port {
> > +			wcam_out: endpoint {
> > +				remote-endpoint = <&mipi_in_wcam>;
> > +				data-lanes = <0 1 3 4>;
> > +			};
> > +		};
> > +	};
> > +};
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 783569e..7746c6b 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -11889,6 +11889,7 @@ L:	linux-media@xxxxxxxxxxxxxxx
> >  T:	git git://linuxtv.org/media_tree.git
> >  S:	Maintained
> >  F:	drivers/media/i2c/ov8856.c
> > +F:	Documentation/devicetree/bindings/media/i2c/ov8856.txt
> >  
> >  OMNIVISION OV9650 SENSOR DRIVER
> >  M:	Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> 





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux