From: Stefan Ringel <stefan.ringel@xxxxxxxx>
Signed-off-by: Stefan Ringel <stefan.ringel@xxxxxxxx>
---
drivers/staging/tm6000/tm6000-core.c | 179 ++++++++++++++++++++++++----------
1 files changed, 128 insertions(+), 51 deletions(-)
diff --git a/drivers/staging/tm6000/tm6000-core.c b/drivers/staging/tm6000/tm6000-core.c
index 7ec13d5..a2e2af5 100644
--- a/drivers/staging/tm6000/tm6000-core.c
+++ b/drivers/staging/tm6000/tm6000-core.c
@@ -414,7 +414,15 @@ struct reg_init tm6010_init_tab[] = {
{ REQ_07_SET_GET_AVREG, 0x3f, 0x00 },
{ REQ_05_SET_GET_USBREG, 0x18, 0x00 },
-
+
+ /* additional from Terratec Cinergy Hybrid XE */
+ { REQ_07_SET_GET_AVREG, 0xdc, 0xaa },
+ { REQ_07_SET_GET_AVREG, 0xdd, 0x30 },
+ { REQ_07_SET_GET_AVREG, 0xde, 0x20 },
+ { REQ_07_SET_GET_AVREG, 0xdf, 0xd0 },
+ { REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x00 },
+ { REQ_07_SET_GET_AVREG, 0xd8, 0x2f },
+
/* set remote wakeup key:any key wakeup */
{ REQ_07_SET_GET_AVREG, 0xe5, 0xfe },
{ REQ_07_SET_GET_AVREG, 0xda, 0xff },
@@ -424,6 +432,7 @@ int tm6000_init (struct tm6000_core *dev)
{
int board, rc=0, i, size;
struct reg_init *tab;
+ u8 buf[40];
if (dev->dev_type == TM6010) {
tab = tm6010_init_tab;
@@ -444,61 +453,129 @@ int tm6000_init (struct tm6000_core *dev)
}
}
- msleep(5); /* Just to be conservative */
-
- /* Check board version - maybe 10Moons specific */
- board=tm6000_get_reg16 (dev, 0x40, 0, 0);
- if (board >=0) {
- printk (KERN_INFO "Board version = 0x%04x\n",board);
- } else {
- printk (KERN_ERR "Error %i while retrieving board version\n",board);
- }
-
+ /* hack */
if (dev->dev_type == TM6010) {
- /* Turn xceive 3028 on */
- tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_3, 0x01);
- msleep(11);
- }
-
- /* Reset GPIO1 and GPIO4. */
- for (i=0; i< 2; i++) {
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->tuner_reset_gpio, 0x00);
- if (rc<0) {
- printk (KERN_ERR "Error %i doing GPIO1 reset\n",rc);
- return rc;
- }
-
- msleep(10); /* Just to be conservative */
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->tuner_reset_gpio, 0x01);
- if (rc<0) {
- printk (KERN_ERR "Error %i doing GPIO1 reset\n",rc);
- return rc;
- }
-
- msleep(10);
- rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_4, 0);
- if (rc<0) {
- printk (KERN_ERR "Error %i doing GPIO4 reset\n",rc);
- return rc;
- }
-
- msleep(10);
- rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_4, 1);
- if (rc<0) {
- printk (KERN_ERR "Error %i doing GPIO4 reset\n",rc);
- return rc;
- }
-
- if (!i) {
- rc=tm6000_get_reg16(dev, 0x40,0,0);
- if (rc>=0) {
- printk ("board=%d\n", rc);
+
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_4, 0);
+ msleep(15);
+
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_1, 0);
+
+ msleep(50);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_1, 1);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x0e, 0x0010, 0x4400, buf, 2);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x10, 0xf432, 0x0000, buf, 2);
+
+ msleep(15);
+ buf[0] = 0x12;
+ buf[1] = 0x34;
+ tm6000_read_write_usb (dev, 0x40, 0x10, 0xf432, 0x0000, buf, 2);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x10, 0xf432, 0x0000, buf, 2);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x10, 0x0032, 0x0000, buf, 2);
+
+ msleep(15);
+ buf[0] = 0x00;
+ buf[1] = 0x01;
+ tm6000_read_write_usb (dev, 0x40, 0x10, 0xf332, 0x0000, buf, 2);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x10, 0x00c0, 0x0000, buf, 39);
+
+ msleep(15);
+ buf[0] = 0x00;
+ buf[1] = 0x00;
+ tm6000_read_write_usb (dev, 0x40, 0x10, 0xf332, 0x0000, buf, 2);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x10, 0x7f1f, 0x0000, buf, 2);
+// printk(KERN_INFO "buf %#x %#x \n", buf[0], buf [1]);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_4, 1);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_0, 1);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_7, 0);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_5, 1);
+
+ msleep(15);
+
+ for (i=0; i< size; i++) {
+ rc= tm6000_set_reg (dev, tab[i].req, tab[i].reg, tab[i].val);
+ if (rc<0) {
+ printk (KERN_ERR "Error %i while setting req %d, "
+ "reg %d to value %d\n", rc,
+ tab[i].req,tab[i].reg, tab[i].val);
+ return rc;
}
}
+
+ msleep(15);
+
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_4, 0);
+ msleep(15);
+
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_1, 0);
+
+ msleep(50);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_1, 1);
+
+ msleep(15);
+ tm6000_read_write_usb (dev, 0xc0, 0x0e, 0x00c2, 0x0008, buf, 2);
+// printk(KERN_INFO "buf %#x %#x \n", buf[0], buf[1]);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_2, 1);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_2, 0);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_2, 1);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_2, 1);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_2, 0);
+ msleep(15);
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ TM6010_GPIO_2, 1);
+ msleep(15);
}
+ /* hack end */
+
+ msleep(5); /* Just to be conservative */
+ /* Check board version - maybe 10Moons specific */
+ if (dev->dev_type == TM5600) {
+ board=tm6000_get_reg16 (dev, 0x40, 0, 0);
+ if (board >=0) {
+ printk (KERN_INFO "Board version = 0x%04x\n",board);
+ } else {
+ printk (KERN_ERR "Error %i while retrieving board version\n",board);
+ }
+ }
+
msleep(50);
return 0;
--
1.6.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
