From: Akihiro Tsukada <tskd08@xxxxxxxxx>
This demod implements an i2c adapter for attached tuner
and relays i2c messages from users (dvb adapters / bridge chips).
Some of them, such as Friio dvb card using gl861,
require each pair of i2c messages for one read to be issued as
two separate transactions.
This patch adds a configuration option to enable this split.
Signed-off-by: Akihiro Tsukada <tskd08@xxxxxxxxx>
---
drivers/media/dvb-frontends/tc90522.c | 25 ++++++++++++++++++++++++-
drivers/media/dvb-frontends/tc90522.h | 3 +++
2 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/media/dvb-frontends/tc90522.c b/drivers/media/dvb-frontends/tc90522.c
index 849d63dbc27..4c61b977466 100644
--- a/drivers/media/dvb-frontends/tc90522.c
+++ b/drivers/media/dvb-frontends/tc90522.c
@@ -687,8 +687,31 @@ tc90522_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
if (i < num)
ret = -ENOMEM;
- else
+ else if (!state->cfg.split_tuner_read_i2c || rd_num == 0)
ret = i2c_transfer(state->i2c_client->adapter, new_msgs, j);
+ else {
+ /*
+ * Split transactions at each I2C_M_RD message.
+ * Some of the parent device require this,
+ * such as Friio (see. dvb-usb-gl861).
+ */
+ int from, to;
+
+ ret = 0;
+ from = 0;
+ do {
+ int r;
+
+ to = from + 1;
+ while (to < j && !(new_msgs[to].flags & I2C_M_RD))
+ to++;
+ r = i2c_transfer(state->i2c_client->adapter,
+ &new_msgs[from], to - from);
+ ret = (r <= 0) ? r : ret + r;
+ from = to;
+ } while (from < j && ret > 0);
+ }
+
if (ret >= 0 && ret < j)
ret = -EIO;
kfree(new_msgs);
diff --git a/drivers/media/dvb-frontends/tc90522.h b/drivers/media/dvb-frontends/tc90522.h
index ac0e2ab5192..07e3813bf59 100644
--- a/drivers/media/dvb-frontends/tc90522.h
+++ b/drivers/media/dvb-frontends/tc90522.h
@@ -28,6 +28,9 @@ struct tc90522_config {
/* [OUT] tuner I2C adapter returned by driver */
struct i2c_adapter *tuner_i2c;
+
+ /* [IN] use two separate I2C transactions for one tuner read */
+ bool split_tuner_read_i2c;
};
#endif /* TC90522_H */
--
2.23.0
