saa7134_i2c_eeprom_md7134_gate() function and the associated comment uses
an inverted i2c gate open / closed terminology.
Let's fix this.
Signed-off-by: Maciej S. Szmigiero <mail@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/media/pci/saa7134/saa7134-i2c.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/media/pci/saa7134/saa7134-i2c.c b/drivers/media/pci/saa7134/saa7134-i2c.c
index 493b1858815f..1414d580c98f 100644
--- a/drivers/media/pci/saa7134/saa7134-i2c.c
+++ b/drivers/media/pci/saa7134/saa7134-i2c.c
@@ -342,7 +342,11 @@ static const struct i2c_client saa7134_client_template = {
/* ----------------------------------------------------------- */
-/* On Medion 7134 reading EEPROM needs DVB-T demod i2c gate open */
+/*
+ * On Medion 7134 reading the SAA7134 chip config EEPROM needs DVB-T
+ * demod i2c gate closed due to an address clash between this EEPROM
+ * and the demod one.
+ */
static void saa7134_i2c_eeprom_md7134_gate(struct saa7134_dev *dev)
{
u8 subaddr = 0x7, dmdregval;
@@ -359,13 +363,13 @@ static void saa7134_i2c_eeprom_md7134_gate(struct saa7134_dev *dev)
ret = i2c_transfer(&dev->i2c_adap, i2cgatemsg_r, 2);
if ((ret == 2) && (dmdregval & 0x2)) {
- pr_debug("%s: DVB-T demod i2c gate was left closed\n",
+ pr_debug("%s: DVB-T demod i2c gate was left open\n",
dev->name);
data[0] = subaddr;
data[1] = (dmdregval & ~0x2);
if (i2c_transfer(&dev->i2c_adap, i2cgatemsg_w, 1) != 1)
- pr_err("%s: EEPROM i2c gate open failure\n",
+ pr_err("%s: EEPROM i2c gate close failure\n",
dev->name);
}
}
