Re: [PATCH v7 01/13] dt-bindings: connector: analog: add tv norms property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/19/19 10:09 AM, Marco Felsch wrote:
> Hi Hans,
> 
> On 19-08-16 13:11, Hans Verkuil wrote:
>> On 8/15/19 1:57 PM, Marco Felsch wrote:
>>> Some connectors no matter if in- or output supports only a limited
>>> range of tv norms. It doesn't matter if the hardware behind that
>>> connector supports more than the listed formats since the users are
>>> restriced by a label e.g. to plug only a camera into this connector
>>> which uses the PAL format.
>>>
>>> This patch adds the capability to describe such limitation within the
>>> firmware. There are no format restrictions if the property isn't
>>> present, so it's completely backward compatible.
>>>
>>> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
>>> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>>> ---
>>> [1] https://patchwork.kernel.org/cover/10794703/
>>>
>>> v7:
>>> I kept Robs r b tag because I only changed the example and extended
>>> TVNORM_* macros.
>>>
>>> - fix some style issues
>>> - add TVNORM_NTSC, TVNORM_525_60 and TVNORM_625_50
>>>
>>> v6:
>>> - tvnorms.h: use tabs instead of spaces
>>> - tvnorms.h: add TVNORM_PAL and TVNORM_SECAM
>>> - tvnorms.h: drop rarely used TVNORM_ATSC_* norms
>>>
>>> v2-v4:
>>> - nothing since the patch was squashed from series [1] into this
>>>   series.
>>> ---
>>>  .../display/connector/analog-tv-connector.txt |  4 ++
>>>  include/dt-bindings/media/tvnorms.h           | 72 +++++++++++++++++++
>>>  2 files changed, 76 insertions(+)
>>>  create mode 100644 include/dt-bindings/media/tvnorms.h
>>>
>>> diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
>>> index 0c0970c210ab..434e8aa0398b 100644
>>> --- a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
>>> +++ b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
>>> @@ -6,6 +6,9 @@ Required properties:
>>>  
>>>  Optional properties:
>>>  - label: a symbolic name for the connector
>>> +- tvnorms: limit the supported tv norms on a connector to the given ones else
>>
>> tv -> TV
>>
>>> +           all tv norms are allowed. Possible video standards are defined in
>>
>> tv -> TV
> 
> Changed both thanks.
> 
>> And a more high-level question: I think tvnorm is a very vague name. It's a term
>> used in media, but what does 'norm' mean anyway? 'tv_standards' or 'video_standards'
>> would be a lot more descriptive.
> 
> I'm with you *_standards would be more descriptive. Now the question is:
> is it a video or a tv standard? Wikipedia says that SECAM, PAL, NTSC is
> a television standard. So I prefer the 'tv_standards' or better the
> 'tv-standards' approach.

It's a bit of both, actually. But in the context of S-Video and Composite connectors
it is a video standard. In the context of a tuner/modulator it would be a TV standard.

I.e. there is no difference between PAL_B and PAL_[GHIDJ] when it comes to S-Video and
Composite connectors, but in the context of a tuner/modulator these defines give
additional information about transmission bands, etc.

That said, I think video-standards is too vague, but so is tv-standards. How about
sdtv-standards? I think that makes a lot of sense since this is really just for SDTV.

So tvnorms.h becomes sdtv-standards.h.

> 
>> 'tvnorm' is, I think, a term used only internally in the media subsystem for no
>> clear reason. In the V4L2 spec it talks about 'video standard'.
>>
>> Sorry for being so late with raising this issue.
>>
>>> +           include/dt-bindings/media/tvnorms.h.
>>>  
>>>  Required nodes:
>>>  - Video port for TV input
>>> @@ -16,6 +19,7 @@ Example
>>>  tv: connector {
>>>  	compatible = "composite-video-connector";
>>>  	label = "tv";
>>> +	tvnorms = <(TVNORM_PAL | TVNORM_NTSC)>;
>>>  
>>>  	port {
>>>  		tv_connector_in: endpoint {
>>> diff --git a/include/dt-bindings/media/tvnorms.h b/include/dt-bindings/media/tvnorms.h
>>> new file mode 100644
>>> index 000000000000..e1275673c4d6
>>> --- /dev/null
>>> +++ b/include/dt-bindings/media/tvnorms.h
>>> @@ -0,0 +1,72 @@
>>> +/* SPDX-License-Identifier: GPL-2.0-only or X11 */
>>> +/*
>>> + * Copyright 2019 Pengutronix, Marco Felsch <kernel@xxxxxxxxxxxxxx>
>>> + */
>>> +
>>> +#ifndef _DT_BINDINGS_MEDIA_TVNORMS_H
>>> +#define _DT_BINDINGS_MEDIA_TVNORMS_H
>>> +
>>> +/* One bit for each standard */
>>
>> I would add a comment here and in videodev2.h where you mention that
>> the two headers should remain in sync.
> 
> Yes, good point.
> 
>>> +#define TVNORM_PAL_B		0x00000001
>>> +#define TVNORM_PAL_B1		0x00000002
>>> +#define TVNORM_PAL_G		0x00000004
>>> +#define TVNORM_PAL_H		0x00000008
>>> +#define TVNORM_PAL_I		0x00000010
>>> +#define TVNORM_PAL_D		0x00000020
>>> +#define TVNORM_PAL_D1		0x00000040
>>> +#define TVNORM_PAL_K		0x00000080
>>> +
>>> +#define TVNORM_PAL		(TVNORM_PAL_B		| \
>>> +				 TVNORM_PAL_B1		| \
>>> +				 TVNORM_PAL_G		| \
>>> +				 TVNORM_PAL_H		| \
>>> +				 TVNORM_PAL_I		| \
>>> +				 TVNORM_PAL_D		| \
>>> +				 TVNORM_PAL_D1		| \
>>> +				 TVNORM_PAL_K)
>>> +
>>> +#define TVNORM_PAL_M		0x00000100
>>> +#define TVNORM_PAL_N		0x00000200
>>> +#define TVNORM_PAL_Nc		0x00000400
>>> +#define TVNORM_PAL_60		0x00000800
>>> +
>>> +#define TVNORM_NTSC_M		0x00001000	/* BTSC */
>>> +#define TVNORM_NTSC_M_JP	0x00002000	/* EIA-J */
>>> +#define TVNORM_NTSC_443		0x00004000
>>> +#define TVNORM_NTSC_M_KR	0x00008000	/* FM A2 */
>>> +
>>> +#define TVNORM_NTSC		(TVNORM_NTSC_M		|\
>>> +				 TVNORM_NTSC_M_JP	|\
>>
>> Add space before \
>>
>>> +				 TVNORM_NTSC_M_KR)
>>> +
>>> +#define TVNORM_SECAM_B		0x00010000
>>> +#define TVNORM_SECAM_D		0x00020000
>>> +#define TVNORM_SECAM_G		0x00040000
>>> +#define TVNORM_SECAM_H		0x00080000
>>> +#define TVNORM_SECAM_K		0x00100000
>>> +#define TVNORM_SECAM_K1		0x00200000
>>> +#define TVNORM_SECAM_L		0x00400000
>>> +#define TVNORM_SECAM_LC		0x00800000
>>> +
>>> +#define TVNORM_SECAM		(TVNORM_SECAM_B		| \
>>> +				 TVNORM_SECAM_D		| \
>>> +				 TVNORM_SECAM_G		| \
>>> +				 TVNORM_SECAM_H		| \
>>> +				 TVNORM_SECAM_K		| \
>>> +				 TVNORM_SECAM_K1	| \
>>> +				 TVNORM_SECAM_L		| \
>>> +				 TVNORM_SECAM_LC)
>>> +
>>> +/* Standards for Countries with 60Hz Line frequency */
>>> +#define TVNORM_525_60		(TVNORM_PAL_M		| \
>>> +				 TVNORM_PAL_60		| \
>>> +				 TVNORM_NTSC		| \
>>> +				 TVNORM_NTSC_443)
>>> +
>>> +/* Standards for Countries with 50Hz Line frequency */
>>> +#define TVNORM_625_50		(TVNORM_PAL		|\
>>> +				 TVNORM_PAL_N		|\
>>> +				 TVNORM_PAL_Nc		|\
>>
>> Add space before \
> 
> Both space errors fixed.
> 
>>> +				 TVNORM_SECAM)
>>> +
>>> +#endif /* _DT_BINDINGS_MEDIA_TVNORMS_H */
>>>
>>
>> I was also wondering if this header shouldn't be in include/dt-bindings/display/
>> since the bindings are also described in 'display'.
> 
> That's a good one and I really don't know which is the 'right' place for
> it. Since the standard has nothing to do with a display I would keep it
> within media. But the radeon [1] gpu uses the stds too. So I really
> don't know which place is better.

Move it to display: that matches where the documentation is.

Note that this means that _DT_BINDINGS_MEDIA_TVNORMS_H also becomes
_DT_BINDINGS_DISPLAY_TVNORMS_H (or DISPLAY_SDTV_STANDARDS_H).

Regards,

	Hans

> 
> [1] drivers/gpu/drm/radeon/radeon_mode.h. 
> 
> Regards,
>   Marco
> 
>> Regards,
>>
>> 	Hans
>>
> 




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux