Re: [RFC,V2,1/2] media: dt-bindings: media: i2c: Add bindings for OV02A10

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sakari,

On Sun, 2019-08-18 at 00:32 +0300, Sakari Ailus wrote:
> Hi Dongchun,
> 
> On Sat, Aug 17, 2019 at 11:53:05AM +0800, Dongchun Zhu wrote:
> ...
> > > > +
> > > > +The device node shall contain one 'port' child node with an
> > > > +'endpoint' subnode for its digital output video port, in accordance
> > > > +with the video interface bindings defined in
> > > > +Documentation/devicetree/bindings/media/video-interfaces.txt.
> > > > +The endpoint optional property 'data-lanes' shall be "<1>".
> > > 
> > > How many lanes does the module (or the sensor) have?
> > > 
> > 
> > From sensor datasheet, OV02A10 supports 1-lane MIPI interface.
> 
> If only one lane is supported, the property should be omitted: there's
> nothing that the driver needs to know here.
> 
Thanks for the suggestion.
But sorry that I didn't read this message this morning, so this issue
still remains unsettled in v3.
https://patchwork.kernel.org/patch/11100219/
I would fix this point in v4.




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux