remove t230 from cxusb (for linux <= 5.2)
Signed-off-by: Jan Pieter van Woerkom <jp@xxxxxxx>
Tested-by: James Hutchinson <jahutchinson99@xxxxxxxxxxxxxx>
---
diff -ru a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c
--- a/drivers/media/usb/dvb-usb/cxusb.c 2019-07-08 00:41:56.000000000 +0200
+++ b/drivers/media/usb/dvb-usb/cxusb.c 2019-07-22 17:34:51.550698820 +0200
@@ -369,26 +369,6 @@
return 0;
}
-static int cxusb_read_status(struct dvb_frontend *fe,
- enum fe_status *status)
-{
- struct dvb_usb_adapter *adap = (struct dvb_usb_adapter *)fe->dvb->priv;
- struct cxusb_state *state = (struct cxusb_state *)adap->dev->priv;
- int ret;
-
- ret = state->fe_read_status(fe, status);
-
- /* it need resync slave fifo when signal change from unlock to lock.*/
- if ((*status & FE_HAS_LOCK) && (!state->last_lock)) {
- mutex_lock(&state->stream_mutex);
- cxusb_streaming_ctrl(adap, 1);
- mutex_unlock(&state->stream_mutex);
- }
-
- state->last_lock = (*status & FE_HAS_LOCK) ? 1 : 0;
- return ret;
-}
-
static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d)
{
int ep = d->props.generic_bulk_ctrl_endpoint;
@@ -1164,83 +1144,6 @@
return 0;
}
-static int cxusb_mygica_t230_frontend_attach(struct dvb_usb_adapter *adap)
-{
- struct dvb_usb_device *d = adap->dev;
- struct cxusb_state *st = d->priv;
- struct i2c_adapter *adapter;
- struct i2c_client *client_demod;
- struct i2c_client *client_tuner;
- struct i2c_board_info info;
- struct si2168_config si2168_config;
- struct si2157_config si2157_config;
-
- /* Select required USB configuration */
- if (usb_set_interface(d->udev, 0, 0) < 0)
- err("set interface failed");
-
- /* Unblock all USB pipes */
- usb_clear_halt(d->udev,
- usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
- usb_clear_halt(d->udev,
- usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
- usb_clear_halt(d->udev,
- usb_rcvbulkpipe(d->udev, d->props.adapter[0].fe[0].stream.endpoint));
-
- /* attach frontend */
- si2168_config.i2c_adapter = &adapter;
- si2168_config.fe = &adap->fe_adap[0].fe;
- si2168_config.ts_mode = SI2168_TS_PARALLEL;
- si2168_config.ts_clock_inv = 1;
- memset(&info, 0, sizeof(struct i2c_board_info));
- strscpy(info.type, "si2168", I2C_NAME_SIZE);
- info.addr = 0x64;
- info.platform_data = &si2168_config;
- request_module(info.type);
- client_demod = i2c_new_device(&d->i2c_adap, &info);
- if (client_demod == NULL || client_demod->dev.driver == NULL)
- return -ENODEV;
-
- if (!try_module_get(client_demod->dev.driver->owner)) {
- i2c_unregister_device(client_demod);
- return -ENODEV;
- }
-
- st->i2c_client_demod = client_demod;
-
- /* attach tuner */
- memset(&si2157_config, 0, sizeof(si2157_config));
- si2157_config.fe = adap->fe_adap[0].fe;
- si2157_config.if_port = 1;
- memset(&info, 0, sizeof(struct i2c_board_info));
- strscpy(info.type, "si2157", I2C_NAME_SIZE);
- info.addr = 0x60;
- info.platform_data = &si2157_config;
- request_module(info.type);
- client_tuner = i2c_new_device(adapter, &info);
- if (client_tuner == NULL || client_tuner->dev.driver == NULL) {
- module_put(client_demod->dev.driver->owner);
- i2c_unregister_device(client_demod);
- return -ENODEV;
- }
- if (!try_module_get(client_tuner->dev.driver->owner)) {
- i2c_unregister_device(client_tuner);
- module_put(client_demod->dev.driver->owner);
- i2c_unregister_device(client_demod);
- return -ENODEV;
- }
-
- st->i2c_client_tuner = client_tuner;
-
- /* hook fe: need to resync the slave fifo when signal locks. */
- mutex_init(&st->stream_mutex);
- st->last_lock = 0;
- st->fe_read_status = adap->fe_adap[0].fe->ops.read_status;
- adap->fe_adap[0].fe->ops.read_status = cxusb_read_status;
-
- return 0;
-}
-
/*
* DViCO has shipped two devices with the same USB ID, but only one of them
* needs a firmware download. Check the device class details to see if they
@@ -1322,7 +1225,6 @@
static struct dvb_usb_device_properties cxusb_aver_a868r_properties;
static struct dvb_usb_device_properties cxusb_d680_dmb_properties;
static struct dvb_usb_device_properties cxusb_mygica_d689_properties;
-static struct dvb_usb_device_properties cxusb_mygica_t230_properties;
static int cxusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -1353,8 +1255,6 @@
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties,
THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230_properties,
- THIS_MODULE, NULL, adapter_nr) ||
0)
return 0;
@@ -1405,7 +1305,6 @@
DVICO_BLUEBIRD_DUAL_4_REV_2,
CONEXANT_D680_DMB,
MYGICA_D689,
- MYGICA_T230,
NR__cxusb_table_index
};
@@ -1470,9 +1369,6 @@
[MYGICA_D689] = {
USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_D689)
},
- [MYGICA_T230] = {
- USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230)
- },
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, cxusb_table);
@@ -2128,60 +2024,6 @@
},
}
};
-
-static struct dvb_usb_device_properties cxusb_mygica_t230_properties = {
- .caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
- .usb_ctrl = CYPRESS_FX2,
-
- .size_of_priv = sizeof(struct cxusb_state),
-
- .num_adapters = 1,
- .adapter = {
- {
- .num_frontends = 1,
- .fe = {{
- .streaming_ctrl = cxusb_streaming_ctrl,
- .frontend_attach = cxusb_mygica_t230_frontend_attach,
-
- /* parameter for the MPEG2-data transfer */
- .stream = {
- .type = USB_BULK,
- .count = 5,
- .endpoint = 0x02,
- .u = {
- .bulk = {
- .buffersize = 8192,
- }
- }
- },
- } },
- },
- },
-
- .power_ctrl = cxusb_d680_dmb_power_ctrl,
-
- .i2c_algo = &cxusb_i2c_algo,
-
- .generic_bulk_ctrl_endpoint = 0x01,
-
- .rc.core = {
- .rc_interval = 100,
- .rc_codes = RC_MAP_D680_DMB,
- .module_name = KBUILD_MODNAME,
- .rc_query = cxusb_d680_dmb_rc_query,
- .allowed_protos = RC_PROTO_BIT_UNKNOWN,
- },
-
- .num_device_descs = 1,
- .devices = {
- {
- "Mygica T230 DVB-T/T2/C",
- { NULL },
- { &cxusb_table[MYGICA_T230], NULL },
- },
- }
-};
static struct usb_driver cxusb_driver = {
.name = "dvb_usb_cxusb",
