Hi Marco, On Thu, Aug 15, 2019 at 02:50:02PM +0200, Marco Felsch wrote: > On 19-08-15 15:33, Laurent Pinchart wrote: > > On Fri, Aug 09, 2019 at 07:58:09AM +0200, Marco Felsch wrote: > >> On 19-05-16 19:27, Laurent Pinchart wrote: > >>> On Mon, Apr 15, 2019 at 02:44:01PM +0200, Marco Felsch wrote: > >>>> Some connectors no matter if in- or output supports only a limited > >>>> range of tv norms. It doesn't matter if the hardware behind that > >>>> connector supports more than the listed formats since the users are > >>>> restriced by a label e.g. to plug only a camera into this connector > >>>> which uses the PAL format. > >>>> > >>>> This patch adds the capability to describe such limitation within the > >>>> firmware. There are no format restrictions if the property isn't > >>>> present, so it's completely backward compatible. > >>> > >>> Why is this needed ? It's not really a hardware property, is it ? What's > >>> the use case ? > >> > >> Cause some hardware only support a limited range of formats to that > >> connector. Of course it is a hardware property. For example if a > >> customer wants to limit a connector to a specifc norm because the > >> hardware behind that connector only supports that format or is > >> restricted to that format. > > > > Then it should be a DT property of the hardware behind that connector > > (or information hardcoded directly into that driver), shouldn't it ? > > Why? The connector is the limiting factor and not the decoder/bridge > device behind that. Let me explain it a bit more in detail. Our customer > sells hardware boxes and cameras. The camera is connected to the box > using a custom plug. So it's guaranteed that only their cameras can be > connected to. Also the camera they are using supports only PAL. So the > PAL signal is the only one which can be received on that connector. The > TVP itself supports more than just PAL signals and has multiple inputs. > So there can be the use case that a hardware box supports two physical > connectors: e.g. connector-PAL, connector-NTSC. The TVP should be > limited to PAL signals if the connector-PAL is active or limited to NTSC > if the connector-NTSC is active. > > Hopefully you see now why we should model it on the connector side and > not on the device behind that connector. So it essentially means that if someone connects an NTSC camera on the PAL input with the same custom connector, the hardware will support it, right ? I don't think it's a hardware limitation of the connector in that case :-) And I don't think it belongs to DT. Userspace is probably where I would handle this type of policy. > >>>> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> > >>>> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > >>>> --- > >>>> [1] https://patchwork.kernel.org/cover/10794703/ > >>>> > >>>> v6: > >>>> - tvnorms.h: use tabs instead of spaces > >>>> - tvnorms.h: add TVNORM_PAL and TVNORM_SECAM > >>>> - tvnorms.h: drop rarely used TVNORM_ATSC_* norms > >>>> > >>>> v2-v4: > >>>> - nothing since the patch was squashed from series [1] into this > >>>> series. > >>>> > >>>> .../display/connector/analog-tv-connector.txt | 4 ++ > >>>> include/dt-bindings/media/tvnorms.h | 56 +++++++++++++++++++ > >>>> 2 files changed, 60 insertions(+) > >>>> create mode 100644 include/dt-bindings/media/tvnorms.h > >>>> > >>>> diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt > >>>> index 0c0970c210ab..346f8937a0b7 100644 > >>>> --- a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt > >>>> +++ b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt > >>>> @@ -6,6 +6,9 @@ Required properties: > >>>> > >>>> Optional properties: > >>>> - label: a symbolic name for the connector > >>>> +- tvnorms: limit the supported tv norms on a connector to the given ones else > >>>> + all tv norms are allowed. Possible video standards are defined in > >>>> + include/dt-bindings/media/tvnorms.h. > >>>> > >>>> Required nodes: > >>>> - Video port for TV input > >>>> @@ -16,6 +19,7 @@ Example > >>>> tv: connector { > >>>> compatible = "composite-video-connector"; > >>>> label = "tv"; > >>>> + tvnorms = <(TVNORM_PAL_M | TVNORM_NTSC_M)>; > >>>> > >>>> port { > >>>> tv_connector_in: endpoint { > >>>> diff --git a/include/dt-bindings/media/tvnorms.h b/include/dt-bindings/media/tvnorms.h > >>>> new file mode 100644 > >>>> index 000000000000..058ab8414145 > >>>> --- /dev/null > >>>> +++ b/include/dt-bindings/media/tvnorms.h > >>>> @@ -0,0 +1,56 @@ > >>>> +/* SPDX-License-Identifier: GPL-2.0-only or X11 */ > >>>> +/* > >>>> + * Copyright 2019 Pengutronix, Marco Felsch <kernel@xxxxxxxxxxxxxx> > >>>> + */ > >>>> + > >>>> +#ifndef _DT_BINDINGS_MEDIA_TVNORMS_H > >>>> +#define _DT_BINDINGS_MEDIA_TVNORMS_H > >>>> + > >>>> +/* one bit for each */ > >>>> +#define TVNORM_PAL_B 0x00000001 > >>>> +#define TVNORM_PAL_B1 0x00000002 > >>>> +#define TVNORM_PAL_G 0x00000004 > >>>> +#define TVNORM_PAL_H 0x00000008 > >>>> +#define TVNORM_PAL_I 0x00000010 > >>>> +#define TVNORM_PAL_D 0x00000020 > >>>> +#define TVNORM_PAL_D1 0x00000040 > >>>> +#define TVNORM_PAL_K 0x00000080 > >>>> + > >>>> +#define TVNORM_PAL (TVNORM_PAL_B | \ > >>>> + TVNORM_PAL_B1 | \ > >>>> + TVNORM_PAL_G | \ > >>>> + TVNORM_PAL_H | \ > >>>> + TVNORM_PAL_I | \ > >>>> + TVNORM_PAL_D | \ > >>>> + TVNORM_PAL_D1 | \ > >>>> + TVNORM_PAL_K) > >>>> + > >>>> +#define TVNORM_PAL_M 0x00000100 > >>>> +#define TVNORM_PAL_N 0x00000200 > >>>> +#define TVNORM_PAL_Nc 0x00000400 > >>>> +#define TVNORM_PAL_60 0x00000800 > >>>> + > >>>> +#define TVNORM_NTSC_M 0x00001000 /* BTSC */ > >>>> +#define TVNORM_NTSC_M_JP 0x00002000 /* EIA-J */ > >>>> +#define TVNORM_NTSC_443 0x00004000 > >>>> +#define TVNORM_NTSC_M_KR 0x00008000 /* FM A2 */ > >>>> + > >>>> +#define TVNORM_SECAM_B 0x00010000 > >>>> +#define TVNORM_SECAM_D 0x00020000 > >>>> +#define TVNORM_SECAM_G 0x00040000 > >>>> +#define TVNORM_SECAM_H 0x00080000 > >>>> +#define TVNORM_SECAM_K 0x00100000 > >>>> +#define TVNORM_SECAM_K1 0x00200000 > >>>> +#define TVNORM_SECAM_L 0x00400000 > >>>> +#define TVNORM_SECAM_LC 0x00800000 > >>>> + > >>>> +#define TVNORM_SECAM (TVNORM_SECAM_B | \ > >>>> + TVNORM_SECAM_D | \ > >>>> + TVNORM_SECAM_G | \ > >>>> + TVNORM_SECAM_H | \ > >>>> + TVNORM_SECAM_K | \ > >>>> + TVNORM_SECAM_K1 | \ > >>>> + TVNORM_SECAM_L | \ > >>>> + TVNORM_SECAM_LC) > >>>> + > >>>> +#endif /* _DT_BINDINGS_MEDIA_TVNORMS_H */ -- Regards, Laurent Pinchart
