[PATCH 9/15] - tm6000 analog digital switch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



signed-off-by: Stefan Ringel <stefan.ringel@xxxxxxxx>

--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <media/tuner.h>
 #include <linux/mutex.h>
+#include "compat.h"
 #include <asm/unaligned.h>
 #include "tuner-i2c.h"
 #include "tuner-xc2028.h"
@@ -994,6 +995,13 @@ static int generic_set_freq(struct dvb_frontend
*fe, u32 freq /* in HZ */,
            buf[0], buf[1], buf[2], buf[3],
            freq / 1000000, (freq % 1000000) / 1000);
 
+    if (priv->ctrl.switch_mode) {
+        if (new_mode == T_ANALOG_TV)
+            do_tuner_callback(fe, SWITCH_TV_MODE, 0);
+        if (new_mode == T_DIGITAL_TV)
+            do_tuner_callback(fe, SWITCH_TV_MODE, 1);
+    }
+   
     rc = 0;
 
 ret:
--- a/drivers/media/common/tuners/tuner-xc2028.h
+++ b/drivers/media/common/tuners/tuner-xc2028.h
@@ -42,6 +42,7 @@ struct xc2028_ctrl {
     unsigned int        disable_power_mgmt:1;
     unsigned int            read_not_reliable:1;
     unsigned int        demod;
+    unsigned int        switch_mode:1;
     enum firmware_type    type:2;
 };
 
@@ -54,6 +55,7 @@ struct xc2028_config {
 /* xc2028 commands for callback */
 #define XC2028_TUNER_RESET    0
 #define XC2028_RESET_CLK    1
+#define SWITCH_TV_MODE        2
 
 #if defined(CONFIG_MEDIA_TUNER_XC2028) ||
(defined(CONFIG_MEDIA_TUNER_XC2028_MODULE) && defined(MODULE))
 extern struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe,
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -269,13 +291,33 @@ static int tm6000_tuner_callback(void *ptr, int
component, int command, int arg)
                         TM6000_GPIO_CLK, 0);
             if (rc<0)
                 return rc;
-            msleep(100);
+            msleep(10);
             rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
                         TM6000_GPIO_CLK, 1);
-            msleep(100);
+            msleep(10);
+            break;
+        }
+        break;
+       
+    case SWITCH_TV_MODE:
+        /* switch between analog and  digital */
+        switch (arg) {
+        case 0:
+            printk(KERN_INFO "switch to analog");
+            tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
+                    TM6010_GPIO_5, 1);
+            printk(KERN_INFO "analog");
+            break;
+        case 1:
+            printk(KERN_INFO "switch to digital");
+            tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
+                    TM6010_GPIO_5, 0);
+            printk(KERN_INFO "digital");
             break;
         }
+    break;
     }
+   
     return (rc);
 }
 
--- a/drivers/staging/tm6000/tm6000-dvb.c
+++ b/drivers/staging/tm6000/tm6000-dvb.c
@@ -235,7 +268,8 @@ int tm6000_dvb_register(struct tm6000_core *dev)
             .i2c_adap = &dev->i2c_adap,
             .i2c_addr = dev->tuner_addr,
         };
-
+       
+        dvb->frontend->callback = tm6000_tuner_callback;
         ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
         if (ret < 0) {
             printk(KERN_ERR
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -269,13 +291,33 @@ static int tm6000_tuner_callback(void *ptr, int
component, int command, int arg)
                         TM6000_GPIO_CLK, 0);
             if (rc<0)
                 return rc;
-            msleep(100);
+            msleep(10);
             rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
                         TM6000_GPIO_CLK, 1);
-            msleep(100);
+            msleep(10);
+            break;
+        }
+        break;
+       
+    case SWITCH_TV_MODE:
+        /* switch between analog and  digital */
+        switch (arg) {
+        case 0:
+            printk(KERN_INFO "switch to analog");
+            tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
+                    TM6010_GPIO_5, 1);
+            printk(KERN_INFO "analog");
+            break;
+        case 1:
+            printk(KERN_INFO "switch to digital");
+            tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
+                    TM6010_GPIO_5, 0);
+            printk(KERN_INFO "digital");
             break;
         }
+    break;
     }
+   
     return (rc);
 }
 

-- 
Stefan Ringel <stefan.ringel@xxxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux