Hi Hugues, On 8/8/19 11:38 AM, Hugues FRUCHET wrote: > Hi Hans, > > You're welcome, here it is: > > 1) v4l-utils master branch, commit > 6aa15f7447d4aeca6af1ed7ee9644a0c7e891ece "v4l2-ctl: fix double > decrementing of stream_count" > > 2) Cropping test is failed as usual because of OV5640 discrete framesizes > > 3) No more /dev/media* and /dev/v4l-*: > root@stm32mp1-av96:~# ls -al /dev/video0 > crw-rw---- 1 root video 81, 0 Mar 19 17:42 /dev/video0 > root@stm32mp1-av96:~# ls -al /dev/media* > ls: cannot access '/dev/media*': No such file or directory > root@stm32mp1-av96:~# ls -al /dev/v4l-* > ls: cannot access '/dev/v4l-*': No such file or directory Good. One more question: is this tested with two subdevs? So a bridge+sensor? Regards, Hans > > > root@stm32mp1-av96:~# v4l2-compliance -s > v4l2-compliance SHA: 6aa15f7447d4aeca6af1ed7ee9644a0c7e891ece, 32 bits > > Compliance test for stm32-dcmi device /dev/video0: > > Driver Info: > Driver name : stm32-dcmi > Card type : STM32 Camera Memory Interface > Bus info : platform:dcmi > Driver version : 4.19.49 > Capabilities : 0x85200001 > Video Capture > Read/Write > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x05200001 > Video Capture > Read/Write > Streaming > Extended Pix Format > > Required ioctls: > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video0 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 1 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls (Input 0): > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 18 Private Controls: 0 > > Format ioctls (Input 0): > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > fail: > ../../../../../../../../../sources/v4l-utils/utils/v4l2-compliance/v4l2-test-formats.cpp(1414): > node->frmsizes_count[pixfm > t] > 1 > test Cropping: FAIL > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls (Input 0): > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls (Input 0): > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK (Not Supported) > > Test input 0: > > Streaming ioctls: > test read/write: OK > test blocking wait: OK > test MMAP (no poll): OK > test MMAP (select): OK > test MMAP (epoll): OK > test USERPTR (no poll): OK (Not Supported) > test USERPTR (select): OK (Not Supported) > test DMABUF: Cannot test, specify --expbuf-device > > Total for stm32-dcmi device /dev/video0: 51, Succeeded: 50, Failed: 1, > Warnings: 0 > > > On 8/7/19 12:15 PM, Hans Verkuil wrote: >> Hi Hugues, >> >> Can you provide the output of the most recent v4l2-compliance? >> >> Use 'v4l2-compliance -s'. >> >> Also, just to confirm, with this v4 there are no /dev/mediaX or >> /dev/v4l-subdevX devices created anymore, right? >> >> This v4 looks good to me, I just want to have these final checks >> done. >> >> Regards, >> >> Hans >> > > Best regards, > Hugues. >
