On 8/7/19 10:52 AM, Dariusz Marcinkiewicz wrote:
> Use the new cec_notifier_conn_(un)register() functions to
> (un)register the notifier for the HDMI connector, and fill
> in the cec_connector_info.
>
> Changes since v2:
> - cec_notifier_phys_addr_invalidate where appropriate,
> - don't check for NULL notifier before calling
> cec_notifier_conn_unregister.
> Changes since v1:
> Add memory barrier to make sure that the notifier
> becomes visible to the irq thread once it is
> fully constructed.
>
> Signed-off-by: Dariusz Marcinkiewicz <darekm@xxxxxxxxxx>
Tested-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Tested with a BeagleBone Black board.
Regards,
Hans
> ---
> drivers/gpu/drm/i2c/tda998x_drv.c | 33 +++++++++++++++++++++----------
> 1 file changed, 23 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
> index 7f34601bb5155..31214663d6fdd 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -794,9 +794,14 @@ static irqreturn_t tda998x_irq_thread(int irq, void *data)
> if (lvl & CEC_RXSHPDLEV_HPD) {
> tda998x_edid_delay_start(priv);
> } else {
> + struct cec_notifier *notify;
> +
> schedule_work(&priv->detect_work);
> - cec_notifier_set_phys_addr(priv->cec_notify,
> - CEC_PHYS_ADDR_INVALID);
> +
> + notify = READ_ONCE(priv->cec_notify);
> + if (notify)
> + cec_notifier_phys_addr_invalidate(
> + notify);
> }
>
> handled = true;
> @@ -1253,6 +1258,8 @@ static int tda998x_connector_init(struct tda998x_priv *priv,
> struct drm_device *drm)
> {
> struct drm_connector *connector = &priv->connector;
> + struct cec_connector_info conn_info;
> + struct cec_notifier *notifier;
> int ret;
>
> connector->interlace_allowed = 1;
> @@ -1269,6 +1276,19 @@ static int tda998x_connector_init(struct tda998x_priv *priv,
> if (ret)
> return ret;
>
> + cec_fill_conn_info_from_drm(&conn_info, connector);
> +
> + notifier = cec_notifier_conn_register(priv->cec_glue.parent,
> + NULL, &conn_info);
> + if (!notifier)
> + return -ENOMEM;
> + /*
> + * Make sure that tda998x_irq_thread does see the notifier
> + * when it fully constructed.
> + */
> + smp_wmb();
> + priv->cec_notify = notifier;
> +
> drm_connector_attach_encoder(&priv->connector,
> priv->bridge.encoder);
>
> @@ -1650,8 +1670,7 @@ static void tda998x_destroy(struct device *dev)
>
> i2c_unregister_device(priv->cec);
>
> - if (priv->cec_notify)
> - cec_notifier_put(priv->cec_notify);
> + cec_notifier_conn_unregister(priv->cec_notify);
> }
>
> static int tda998x_create(struct device *dev)
> @@ -1776,12 +1795,6 @@ static int tda998x_create(struct device *dev)
> cec_write(priv, REG_CEC_RXSHPDINTENA, CEC_RXSHPDLEV_HPD);
> }
>
> - priv->cec_notify = cec_notifier_get(dev);
> - if (!priv->cec_notify) {
> - ret = -ENOMEM;
> - goto fail;
> - }
> -
> priv->cec_glue.parent = dev;
> priv->cec_glue.data = priv;
> priv->cec_glue.init = tda998x_cec_hook_init;
>
