Hi Tomasz, On Mon, 2019-07-29 at 17:57 +0800, Tomasz Figa wrote: > On Mon, Jul 29, 2019 at 3:01 PM Jerry-ch Chen > <Jerry-ch.Chen@xxxxxxxxxxxx> wrote: > > > > Hi Enrico, > > > > On Tue, 2019-07-09 at 18:56 +0800, Enrico Weigelt, metux IT consult > > wrote: > > > On 09.07.19 10:41, Jerry-ch Chen wrote: > > > > > > Hi, > > > > > > > > > > diff --git a/drivers/media/platform/mtk-isp/fd/mtk_fd.h b/drivers/media/platform/mtk-isp/fd/mtk_fd.h > > > > new file mode 100644 > > > > index 0000000..289999b > > > > --- /dev/null > > > > +++ b/drivers/media/platform/mtk-isp/fd/mtk_fd.h > > > > @@ -0,0 +1,157 @@ > > > > +/* SPDX-License-Identifier: GPL-2.0 */ > > > > +// > > > > +// Copyright (c) 2018 MediaTek Inc. > > > > + > > > > +#ifndef __MTK_FD_HW_H__ > > > > +#define __MTK_FD_HW_H__ > > > > + > > > > +#include <linux/io.h> > > > > +#include <linux/types.h> > > > > +#include <linux/platform_device.h> > > > > +#include <media/v4l2-ctrls.h> > > > > +#include <media/v4l2-device.h> > > > > +#include <media/videobuf2-v4l2.h> > > > > + > > > > +#define MTK_FD_OUTPUT_MIN_WIDTH 26U > > > > +#define MTK_FD_OUTPUT_MIN_HEIGHT 26U > > > > +#define MTK_FD_OUTPUT_MAX_WIDTH 640U > > > > +#define MTK_FD_OUTPUT_MAX_HEIGHT 480U > > > > + > > > > +/* Control the user defined image widths and heights > > > > + * to be scaled and performed face detection in FD HW. > > > > + * MTK FD support up to 14 user defined image sizes to perform face detection. > > > > + */ > > > > +#define V4L2_CID_MTK_FD_SCALE_IMG_WIDTH (V4L2_CID_USER_MTK_FD_BASE + 1) > > > > +#define V4L2_CID_MTK_FD_SCALE_IMG_HEIGHT (V4L2_CID_USER_MTK_FD_BASE + 2) > > > > > > I've got a *really* bad feeling about introducing chip specific > > > uapi stuff. (by the way: uapi stuff belongs into include/uapi/...) > > > > > Thanks for your comments, > > > > If we remain chip-specific control IDs, I will move the uapi stuff into > > inlcude/uapi/mtk_fd.h (filename TBD) > > > > > Maybe you could tell us what that's *really* about, so we can find some > > > standard / chip-independent api for these things. That's one of the > > > major point of the kernel: hardware abstraction. > > > > > I am not sure if it is possible for us to add some standard > > v4l2-controls for face detection, a further explanations of controls are > > listed below. > > > > In v4l2-controls, there exists V4L2_CID_DETECT_CLASS, but I haven't > > found the standards or api that can be used for face detection yet. > > https://elixir.bootlin.com/linux/latest/source/include/uapi/linux/v4l2-controls.h#L1092 > > > > For detecting certain face angle and head direction, we would need > > V4L2_CID_DETECT_ANGLE, V4L2_CID_DETECT_DIRECTION controls for user to > > specify the angle and direction to be detected. > > In MTK FD driver, we support the following angles and directions to be > > selected by user, and they are both multiple selected . > > FD_angle_table[] = {-90, -45, 0 , 45, 90} > > FD_direction_table[] = {0, 30, 60, 90, 120, 150, ..., 330} > > > > Assuming these v4l2-controls are array of V4L2_CTRL_TYPE_U16 with > > dimension 5 and 12. > > User can select the desired angle and directions to be detected into > > arrays and bring it to driver by these controls, however, the more they > > select, the longer execution time needed by HW. > > > > Sounds like we need some kind of a menu bitmask control here, but I > don't see V4L2 having anything like that. > > Hans, Sakari, any ideas? > > > For detecting different sizes of faces and increase the detection speed, > > FD driver might need to scales down the input image into different > > smaller sizes > > Do you mean the FD hardware would do the scaling or the driver code > itself? It would be undesirable to do such scaling in a kernel driver, > so if that's not something handled by the hardware, the downscaled > image might need to be provided from the userspace. > Thanks for your comments. Yes, FD hardware will do the scaling itself, so driver could set the sizes. > >, besides driver default values, user or proprietary > > algorithm library can manually set the desired image sizes, therefore, > > we would need the following controls: > > V4L2_CID_DETECT_SCALE_DOWN_IMG_WIDTH and > > V4L2_CID_DETECT_SCALE_DOWN_IMG_HEIGHT. > > In MTK FD driver, we implement these controls as array of > > V4L2_CTRL_TYPE_U16 with the dimension 15. > > Why 15? > It consists of one input image size and 14 down-scaled image sizes, the amount 15 (or say 14) is defined by the MTK FD algo library, therefore I remain the number of 15 here for communicate with the library. Maybe it should be defined as following? MTK_FD_MAX_SCALE_SIZE_NUM 14 and MTK_FD_SCALE_ARR_NUM 15 > > > > For controlling detection speed, we would need the > > V4L2_CID_DETECT_SPEED, the faster speedup implies the lower accuracy of > > detection, In MTK FD driver, the max level of speedup is 7, and default > > value is 0. > > > > For MTK FD algorithm user library, they would need select extra > > detection features(models) used in HW, we need > > V4L2_CID_MTK_FD_EXTRA_MODEL, this will be set to 1 for using extra > > model. However, we are considering make this control more > > chip-independent and can be added into standard. > > for example, V4L2_CID_DETECTION_FD_MODEL or ...FD_ALGO, > > drivers can define the detection algorithm or detection model to be used > > for users to select. How do you think? > > Sounds like something that could be a menu control, so it could vary > between drivers. > Ok, and maybe it should be created by v4l2_ctrl_new_int_menu(...)? > > > > In short, I summery the control IDs as following: > > V4L2_CID_DETECT_ANGLE: set the angle of face in degrees. 90 ~ -90 > > degrees. > > V4L2_CID_DETECT_DIRECTION: set the rotation of the head in degrees. > > 0~330 degrees. > > V4L2_CID_DETECT_SCALE_DOWN_IMG_WIDTH: set the image widths for an input > > image to be scaled down for face detection > > V4L2_CID_DETECT_SCALE_DOWN_IMG_HEIGHT: set the image heights for an > > input image to be scaled down for face detection > > V4L2_CID_DETECT_SPEED: set the detection speed, usually reducing > > accuracy. > > V4L2_CID_DETECTION_FD_MODEL: select the detection model or algorithm to > > be used by face detection driver. > > > > > > +#define ENABLE_FD 0x111 > > > > +#define FD_HW_ENABLE 0x4 > > > > +#define FD_INT_EN 0x15c > > > > +#define FD_INT 0x168 > > > > +#define FD_RESULT 0x178 > > > > +#define FD_IRQ_MASK 0x001 > > > > + > > > > +#define RS_MAX_BUF_SIZE 2288788 > > > > +#define FD_MAX_SPEEDUP 7 > > > > +#define FD_MAX_POSE_VAL 0xfffffffffffffff > > > > +#define FD_DEF_POSE_VAL 0x3ff > > > > +#define MAX_FD_SEL_NUM 1026 > > > > > > If that file is supposed to be included by anything beyond the driver > > > itself, we need proper prefixing. (same for anything else in here) > > > > > I will fix it as following: > > > > #define FD_ENABLE 0x111 > > > > #define FD_REG_OFFSET_HW_ENABLE 0x4 > > #define FD_REG_OFFSET_INT_EN 0x15c > > #define FD_REG_OFFSET_INT_VAL 0x168 > > #define FD_REG_OFFSET_RESULT 0x178 > > > > #define FD_IRQ_MASK 1 > > #define FD_MAX_RS_BUF_SIZE 2288788 > > #define FD_MAX_SPEEDUP 7 > > #define FD_MAX_RESULT_NUM 1026 > > > > I'd suggest the MTK_FD_ prefix. > Ok, I will use MTK_FD_ prefix. > > > > diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h > > > > index 3dcfc61..eae876e 100644 > > > > --- a/include/uapi/linux/v4l2-controls.h > > > > +++ b/include/uapi/linux/v4l2-controls.h > > > > @@ -192,6 +192,10 @@ enum v4l2_colorfx { > > > > * We reserve 16 controls for this driver. */ > > > > #define V4L2_CID_USER_IMX_BASE (V4L2_CID_USER_BASE + 0x10b0) > > > > > > > > +/* The base for the mediatek FD driver controls */ > > > > +/* We reserve 16 controls for this driver. */ > > > > +#define V4L2_CID_USER_MTK_FD_BASE (V4L2_CID_USER_BASE + 0x10d0) > > > > > > Why only the base, but not the actual IDs in uapi ? > > > > > I will put actual IDs in uapi/ for user to reference. > > > > > > > > --mtx > > > > > > > Best regards, > Tomasz Best regards, Jerry
