Convert the via-camera to the vb2 framework. With this change this
driver passes all 'v4l2-compliance -s' tests on my OLPC 1.5.
Also tested with the Sugar 'Record' application.
All tests were done under the OLPC official 5.0.8 kernel.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
---
As usual, the vb2 conversion patch is hard to read. There really is no
way to split this up in smaller patches.
---
drivers/media/platform/Kconfig | 2 +-
drivers/media/platform/via-camera.c | 492 +++++++++-------------------
2 files changed, 159 insertions(+), 335 deletions(-)
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 8a19654b393a..89555f9a813f 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -16,7 +16,7 @@ source "drivers/media/platform/marvell-ccic/Kconfig"
config VIDEO_VIA_CAMERA
tristate "VIAFB camera controller support"
depends on FB_VIA
- select VIDEOBUF_DMA_SG
+ select VIDEOBUF2_DMA_SG
select VIDEO_OV7670
help
Driver support for the integrated camera controller in VIA
diff --git a/drivers/media/platform/via-camera.c b/drivers/media/platform/via-camera.c
index 24c5d2a7b91f..78841b9015ce 100644
--- a/drivers/media/platform/via-camera.c
+++ b/drivers/media/platform/via-camera.c
@@ -21,7 +21,7 @@
#include <media/v4l2-event.h>
#include <media/v4l2-image-sizes.h>
#include <media/i2c/ov7670.h>
-#include <media/videobuf-dma-sg.h>
+#include <media/videobuf2-dma-sg.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/pm_qos.h>
@@ -85,16 +85,11 @@ struct via_camera {
* live in frame buffer memory, so we don't call them "DMA".
*/
unsigned int cb_offsets[3]; /* offsets into fb mem */
- u8 __iomem *cb_addrs[3]; /* Kernel-space addresses */
+ u8 __iomem *cb_addrs[3]; /* Kernel-space addresses */
int n_cap_bufs; /* How many are we using? */
- int next_buf;
- struct videobuf_queue vb_queue;
- struct list_head buffer_queue; /* prot. by reg_lock */
- /*
- * User tracking.
- */
- int users;
- struct file *owner;
+ struct vb2_queue vq;
+ struct list_head buffer_queue;
+ u32 sequence;
/*
* Video format information. sensor_format is kept in a form
* that we can use to pass to the sensor. We always run the
@@ -107,6 +102,13 @@ struct via_camera {
u32 mbus_code;
};
+/* buffer for one video frame */
+struct via_buffer {
+ /* common v4l buffer stuff -- must be first */
+ struct vb2_v4l2_buffer vbuf;
+ struct list_head queue;
+};
+
/*
* Yes, this is a hack, but there's only going to be one of these
* on any system we know of.
@@ -323,28 +325,15 @@ static irqreturn_t viacam_quick_irq(int irq, void *data)
}
/*
- * Find the next videobuf buffer which has somebody waiting on it.
+ * Find the next buffer which has somebody waiting on it.
*/
-static struct videobuf_buffer *viacam_next_buffer(struct via_camera *cam)
+static struct via_buffer *viacam_next_buffer(struct via_camera *cam)
{
- unsigned long flags;
- struct videobuf_buffer *buf = NULL;
-
- spin_lock_irqsave(&cam->viadev->reg_lock, flags);
if (cam->opstate != S_RUNNING)
- goto out;
+ return NULL;
if (list_empty(&cam->buffer_queue))
- goto out;
- buf = list_entry(cam->buffer_queue.next, struct videobuf_buffer, queue);
- if (!waitqueue_active(&buf->done)) {/* Nobody waiting */
- buf = NULL;
- goto out;
- }
- list_del(&buf->queue);
- buf->state = VIDEOBUF_ACTIVE;
-out:
- spin_unlock_irqrestore(&cam->viadev->reg_lock, flags);
- return buf;
+ return NULL;
+ return list_entry(cam->buffer_queue.next, struct via_buffer, queue);
}
/*
@@ -352,11 +341,12 @@ static struct videobuf_buffer *viacam_next_buffer(struct via_camera *cam)
*/
static irqreturn_t viacam_irq(int irq, void *data)
{
- int bufn;
- struct videobuf_buffer *vb;
struct via_camera *cam = data;
- struct videobuf_dmabuf *vdma;
+ struct via_buffer *vb;
+ int bufn;
+ struct sg_table *sgt;
+ mutex_lock(&cam->lock);
/*
* If there is no place to put the data frame, don't bother
* with anything else.
@@ -374,12 +364,15 @@ static irqreturn_t viacam_irq(int irq, void *data)
/*
* Copy over the data and let any waiters know.
*/
- vdma = videobuf_to_dma(vb);
- viafb_dma_copy_out_sg(cam->cb_offsets[bufn], vdma->sglist, vdma->sglen);
- vb->state = VIDEOBUF_DONE;
- vb->size = cam->user_format.sizeimage;
- wake_up(&vb->done);
+ sgt = vb2_dma_sg_plane_desc(&vb->vbuf.vb2_buf, 0);
+ vb->vbuf.vb2_buf.timestamp = ktime_get_ns();
+ viafb_dma_copy_out_sg(cam->cb_offsets[bufn], sgt->sgl, sgt->nents);
+ vb->vbuf.sequence = cam->sequence++;
+ vb->vbuf.field = V4L2_FIELD_NONE;
+ list_del(&vb->queue);
+ vb2_buffer_done(&vb->vbuf.vb2_buf, VB2_BUF_STATE_DONE);
done:
+ mutex_unlock(&cam->lock);
return IRQ_HANDLED;
}
@@ -555,7 +548,6 @@ static int viacam_config_controller(struct via_camera *cam)
static void viacam_start_engine(struct via_camera *cam)
{
spin_lock_irq(&cam->viadev->reg_lock);
- cam->next_buf = 0;
viacam_write_reg_mask(cam, VCR_CAPINTC, VCR_CI_ENABLE, VCR_CI_ENABLE);
viacam_int_enable(cam);
(void) viacam_read_reg(cam, VCR_CAPINTC); /* Force post */
@@ -576,81 +568,117 @@ static void viacam_stop_engine(struct via_camera *cam)
/* --------------------------------------------------------------------------*/
-/* Videobuf callback ops */
+/* vb2 callback ops */
-/*
- * buffer_setup. The purpose of this one would appear to be to tell
- * videobuf how big a single image is. It's also evidently up to us
- * to put some sort of limit on the maximum number of buffers allowed.
- */
-static int viacam_vb_buf_setup(struct videobuf_queue *q,
- unsigned int *count, unsigned int *size)
+static struct via_buffer *vb2_to_via_buffer(struct vb2_buffer *vb)
{
- struct via_camera *cam = q->priv_data;
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- *size = cam->user_format.sizeimage;
- if (*count == 0 || *count > 6) /* Arbitrary number */
- *count = 6;
- return 0;
+ return container_of(vbuf, struct via_buffer, vbuf);
}
-/*
- * Prepare a buffer.
- */
-static int viacam_vb_buf_prepare(struct videobuf_queue *q,
- struct videobuf_buffer *vb, enum v4l2_field field)
+static void viacam_vb2_queue(struct vb2_buffer *vb)
{
- struct via_camera *cam = q->priv_data;
-
- vb->size = cam->user_format.sizeimage;
- vb->width = cam->user_format.width; /* bytesperline???? */
- vb->height = cam->user_format.height;
- vb->field = field;
- if (vb->state == VIDEOBUF_NEEDS_INIT) {
- int ret = videobuf_iolock(q, vb, NULL);
- if (ret)
- return ret;
+ struct via_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
+ struct via_buffer *via = vb2_to_via_buffer(vb);
+
+ list_add_tail(&via->queue, &cam->buffer_queue);
+}
+
+static int viacam_vb2_prepare(struct vb2_buffer *vb)
+{
+ struct via_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
+
+ if (vb2_plane_size(vb, 0) < cam->user_format.sizeimage) {
+ cam_dbg(cam,
+ "Plane size too small (%lu < %u)\n",
+ vb2_plane_size(vb, 0),
+ cam->user_format.sizeimage);
+ return -EINVAL;
}
- vb->state = VIDEOBUF_PREPARED;
+
+ vb2_set_plane_payload(vb, 0, cam->user_format.sizeimage);
+
return 0;
}
-/*
- * We've got a buffer to put data into.
- *
- * FIXME: check for a running engine and valid buffers?
- */
-static void viacam_vb_buf_queue(struct videobuf_queue *q,
- struct videobuf_buffer *vb)
+static int viacam_vb2_queue_setup(struct vb2_queue *vq,
+ unsigned int *nbufs,
+ unsigned int *num_planes, unsigned int sizes[],
+ struct device *alloc_devs[])
{
- struct via_camera *cam = q->priv_data;
+ struct via_camera *cam = vb2_get_drv_priv(vq);
+ int size = cam->user_format.sizeimage;
+
+ if (*num_planes)
+ return sizes[0] < size ? -EINVAL : 0;
+
+ *num_planes = 1;
+ sizes[0] = size;
+ return 0;
+}
+static int viacam_vb2_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct via_camera *cam = vb2_get_drv_priv(vq);
+ struct via_buffer *buf, *tmp;
+ int ret = 0;
+
+ if (cam->opstate != S_IDLE) {
+ ret = -EBUSY;
+ goto out;
+ }
/*
- * Note that videobuf holds the lock when it calls
- * us, so we need not (indeed, cannot) take it here.
+ * Configure things if need be.
*/
- vb->state = VIDEOBUF_QUEUED;
- list_add_tail(&vb->queue, &cam->buffer_queue);
+ if (test_bit(CF_CONFIG_NEEDED, &cam->flags)) {
+ ret = viacam_configure_sensor(cam);
+ if (ret)
+ goto out;
+ ret = viacam_config_controller(cam);
+ if (ret)
+ goto out;
+ }
+ cam->sequence = 0;
+ /*
+ * If the CPU goes into C3, the DMA transfer gets corrupted and
+ * users start filing unsightly bug reports. Put in a "latency"
+ * requirement which will keep the CPU out of the deeper sleep
+ * states.
+ */
+ pm_qos_add_request(&cam->qos_request, PM_QOS_CPU_DMA_LATENCY, 50);
+ viacam_start_engine(cam);
+ return 0;
+out:
+ list_for_each_entry_safe(buf, tmp, &cam->buffer_queue, queue) {
+ list_del(&buf->queue);
+ vb2_buffer_done(&buf->vbuf.vb2_buf, VB2_BUF_STATE_QUEUED);
+ }
+ return ret;
}
-/*
- * Free a buffer.
- */
-static void viacam_vb_buf_release(struct videobuf_queue *q,
- struct videobuf_buffer *vb)
+static void viacam_vb2_stop_streaming(struct vb2_queue *vq)
{
- struct via_camera *cam = q->priv_data;
+ struct via_camera *cam = vb2_get_drv_priv(vq);
+ struct via_buffer *buf, *tmp;
+
+ pm_qos_remove_request(&cam->qos_request);
+ viacam_stop_engine(cam);
- videobuf_dma_unmap(&cam->platdev->dev, videobuf_to_dma(vb));
- videobuf_dma_free(videobuf_to_dma(vb));
- vb->state = VIDEOBUF_NEEDS_INIT;
+ list_for_each_entry_safe(buf, tmp, &cam->buffer_queue, queue) {
+ list_del(&buf->queue);
+ vb2_buffer_done(&buf->vbuf.vb2_buf, VB2_BUF_STATE_ERROR);
+ }
}
-static const struct videobuf_queue_ops viacam_vb_ops = {
- .buf_setup = viacam_vb_buf_setup,
- .buf_prepare = viacam_vb_buf_prepare,
- .buf_queue = viacam_vb_buf_queue,
- .buf_release = viacam_vb_buf_release,
+static const struct vb2_ops viacam_vb2_ops = {
+ .queue_setup = viacam_vb2_queue_setup,
+ .buf_queue = viacam_vb2_queue,
+ .buf_prepare = viacam_vb2_prepare,
+ .start_streaming = viacam_vb2_start_streaming,
+ .stop_streaming = viacam_vb2_stop_streaming,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
};
/* --------------------------------------------------------------------------*/
@@ -678,15 +706,7 @@ static int viacam_open(struct file *filp)
}
via_sensor_power_up(cam);
set_bit(CF_CONFIG_NEEDED, &cam->flags);
- /*
- * Hook into videobuf. Evidently this cannot fail.
- */
- videobuf_queue_sg_init(&cam->vb_queue, &viacam_vb_ops,
- &cam->platdev->dev, &cam->viadev->reg_lock,
- V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
- sizeof(struct videobuf_buffer), cam, NULL);
}
- (cam->users)++;
out:
mutex_unlock(&cam->lock);
return ret;
@@ -698,108 +718,27 @@ static int viacam_release(struct file *filp)
bool last_open;
mutex_lock(&cam->lock);
- (cam->users)--;
last_open = v4l2_fh_is_singular_file(filp);
- /*
- * If the "owner" is closing, shut down any ongoing
- * operations.
- */
- if (filp == cam->owner) {
- videobuf_stop(&cam->vb_queue);
- /*
- * We don't hold the spinlock here, but, if release()
- * is being called by the owner, nobody else will
- * be changing the state. And an extra stop would
- * not hurt anyway.
- */
- if (cam->opstate != S_IDLE)
- viacam_stop_engine(cam);
- cam->owner = NULL;
- }
+ _vb2_fop_release(filp, NULL);
/*
* Last one out needs to turn out the lights.
*/
if (last_open) {
- videobuf_mmap_free(&cam->vb_queue);
via_sensor_power_down(cam);
viafb_release_dma();
}
- v4l2_fh_release(filp);
mutex_unlock(&cam->lock);
return 0;
}
-/*
- * Read a frame from the device.
- */
-static ssize_t viacam_read(struct file *filp, char __user *buffer,
- size_t len, loff_t *pos)
-{
- struct via_camera *cam = video_drvdata(filp);
- int ret;
-
- mutex_lock(&cam->lock);
- /*
- * Enforce the V4l2 "only one owner gets to read data" rule.
- */
- if (cam->owner && cam->owner != filp) {
- ret = -EBUSY;
- goto out_unlock;
- }
- cam->owner = filp;
- /*
- * Do we need to configure the hardware?
- */
- if (test_bit(CF_CONFIG_NEEDED, &cam->flags)) {
- ret = viacam_configure_sensor(cam);
- if (!ret)
- ret = viacam_config_controller(cam);
- if (ret)
- goto out_unlock;
- }
- /*
- * Fire up the capture engine, then have videobuf do
- * the heavy lifting. Someday it would be good to avoid
- * stopping and restarting the engine each time.
- */
- INIT_LIST_HEAD(&cam->buffer_queue);
- viacam_start_engine(cam);
- ret = videobuf_read_stream(&cam->vb_queue, buffer, len, pos, 0,
- filp->f_flags & O_NONBLOCK);
- viacam_stop_engine(cam);
- /* videobuf_stop() ?? */
-
-out_unlock:
- mutex_unlock(&cam->lock);
- return ret;
-}
-
-
-static __poll_t viacam_poll(struct file *filp, struct poll_table_struct *pt)
-{
- struct via_camera *cam = video_drvdata(filp);
-
- return v4l2_ctrl_poll(filp, pt) | videobuf_poll_stream(filp, &cam->vb_queue, pt);
-}
-
-
-static int viacam_mmap(struct file *filp, struct vm_area_struct *vma)
-{
- struct via_camera *cam = video_drvdata(filp);
-
- return videobuf_mmap_mapper(&cam->vb_queue, vma);
-}
-
-
-
static const struct v4l2_file_operations viacam_fops = {
.owner = THIS_MODULE,
.open = viacam_open,
.release = viacam_release,
- .read = viacam_read,
- .poll = viacam_poll,
- .mmap = viacam_mmap,
- .unlocked_ioctl = video_ioctl2,
+ .read = vb2_fop_read,
+ .poll = vb2_fop_poll,
+ .mmap = vb2_fop_mmap,
+ .unlocked_ioctl = video_ioctl2,
};
/*----------------------------------------------------------------------------*/
@@ -926,12 +865,8 @@ static int viacam_try_fmt_vid_cap(struct file *filp, void *priv,
{
struct via_camera *cam = video_drvdata(filp);
struct v4l2_format sfmt;
- int ret;
- mutex_lock(&cam->lock);
- ret = viacam_do_try_fmt(cam, &fmt->fmt.pix, &sfmt.fmt.pix);
- mutex_unlock(&cam->lock);
- return ret;
+ return viacam_do_try_fmt(cam, &fmt->fmt.pix, &sfmt.fmt.pix);
}
@@ -940,9 +875,7 @@ static int viacam_g_fmt_vid_cap(struct file *filp, void *priv,
{
struct via_camera *cam = video_drvdata(filp);
- mutex_lock(&cam->lock);
fmt->fmt.pix = cam->user_format;
- mutex_unlock(&cam->lock);
return 0;
}
@@ -958,18 +891,15 @@ static int viacam_s_fmt_vid_cap(struct file *filp, void *priv,
* Camera must be idle or we can't mess with the
* video setup.
*/
- mutex_lock(&cam->lock);
- if (cam->opstate != S_IDLE) {
- ret = -EBUSY;
- goto out;
- }
+ if (cam->opstate != S_IDLE)
+ return -EBUSY;
/*
* Let the sensor code look over and tweak the
* requested formatting.
*/
ret = viacam_do_try_fmt(cam, &fmt->fmt.pix, &sfmt.fmt.pix);
if (ret)
- goto out;
+ return ret;
/*
* OK, let's commit to the new format.
*/
@@ -979,8 +909,6 @@ static int viacam_s_fmt_vid_cap(struct file *filp, void *priv,
ret = viacam_configure_sensor(cam);
if (!ret)
ret = viacam_config_controller(cam);
-out:
- mutex_unlock(&cam->lock);
return ret;
}
@@ -993,140 +921,22 @@ static int viacam_querycap(struct file *filp, void *priv,
return 0;
}
-/*
- * Streaming operations - pure videobuf stuff.
- */
-static int viacam_reqbufs(struct file *filp, void *priv,
- struct v4l2_requestbuffers *rb)
-{
- struct via_camera *cam = video_drvdata(filp);
-
- return videobuf_reqbufs(&cam->vb_queue, rb);
-}
-
-static int viacam_querybuf(struct file *filp, void *priv,
- struct v4l2_buffer *buf)
-{
- struct via_camera *cam = video_drvdata(filp);
-
- return videobuf_querybuf(&cam->vb_queue, buf);
-}
-
-static int viacam_qbuf(struct file *filp, void *priv, struct v4l2_buffer *buf)
-{
- struct via_camera *cam = video_drvdata(filp);
-
- return videobuf_qbuf(&cam->vb_queue, buf);
-}
-
-static int viacam_dqbuf(struct file *filp, void *priv, struct v4l2_buffer *buf)
-{
- struct via_camera *cam = video_drvdata(filp);
-
- return videobuf_dqbuf(&cam->vb_queue, buf, filp->f_flags & O_NONBLOCK);
-}
-
-static int viacam_streamon(struct file *filp, void *priv, enum v4l2_buf_type t)
-{
- struct via_camera *cam = video_drvdata(filp);
- int ret = 0;
-
- if (t != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- mutex_lock(&cam->lock);
- if (cam->opstate != S_IDLE) {
- ret = -EBUSY;
- goto out;
- }
- /*
- * Enforce the V4l2 "only one owner gets to read data" rule.
- */
- if (cam->owner && cam->owner != filp) {
- ret = -EBUSY;
- goto out;
- }
- cam->owner = filp;
- /*
- * Configure things if need be.
- */
- if (test_bit(CF_CONFIG_NEEDED, &cam->flags)) {
- ret = viacam_configure_sensor(cam);
- if (ret)
- goto out;
- ret = viacam_config_controller(cam);
- if (ret)
- goto out;
- }
- /*
- * If the CPU goes into C3, the DMA transfer gets corrupted and
- * users start filing unsightly bug reports. Put in a "latency"
- * requirement which will keep the CPU out of the deeper sleep
- * states.
- */
- pm_qos_add_request(&cam->qos_request, PM_QOS_CPU_DMA_LATENCY, 50);
- /*
- * Fire things up.
- */
- INIT_LIST_HEAD(&cam->buffer_queue);
- ret = videobuf_streamon(&cam->vb_queue);
- if (!ret)
- viacam_start_engine(cam);
-out:
- mutex_unlock(&cam->lock);
- return ret;
-}
-
-static int viacam_streamoff(struct file *filp, void *priv, enum v4l2_buf_type t)
-{
- struct via_camera *cam = video_drvdata(filp);
- int ret;
-
- if (t != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
- mutex_lock(&cam->lock);
- if (cam->opstate != S_RUNNING) {
- ret = -EINVAL;
- goto out;
- }
- pm_qos_remove_request(&cam->qos_request);
- viacam_stop_engine(cam);
- /*
- * Videobuf will recycle all of the outstanding buffers, but
- * we should be sure we don't retain any references to
- * any of them.
- */
- ret = videobuf_streamoff(&cam->vb_queue);
- INIT_LIST_HEAD(&cam->buffer_queue);
-out:
- mutex_unlock(&cam->lock);
- return ret;
-}
-
/* G/S_PARM */
static int viacam_g_parm(struct file *filp, void *priv,
struct v4l2_streamparm *parm)
{
struct via_camera *cam = video_drvdata(filp);
- int ret;
- mutex_lock(&cam->lock);
- ret = v4l2_g_parm_cap(video_devdata(filp), cam->sensor, parm);
- mutex_unlock(&cam->lock);
- return ret;
+ return v4l2_g_parm_cap(video_devdata(filp), cam->sensor, parm);
}
static int viacam_s_parm(struct file *filp, void *priv,
struct v4l2_streamparm *parm)
{
struct via_camera *cam = video_drvdata(filp);
- int ret;
- mutex_lock(&cam->lock);
- ret = v4l2_s_parm_cap(video_devdata(filp), cam->sensor, parm);
- mutex_unlock(&cam->lock);
- return ret;
+ return v4l2_s_parm_cap(video_devdata(filp), cam->sensor, parm);
}
static int viacam_enum_framesizes(struct file *filp, void *priv,
@@ -1172,9 +982,7 @@ static int viacam_enum_frameintervals(struct file *filp, void *priv,
if (interval->width < QCIF_WIDTH || interval->width > VGA_WIDTH ||
interval->height < QCIF_HEIGHT || interval->height > VGA_HEIGHT)
return -EINVAL;
- mutex_lock(&cam->lock);
ret = sensor_call(cam, pad, enum_frame_interval, NULL, &fie);
- mutex_unlock(&cam->lock);
if (ret)
return ret;
interval->type = V4L2_FRMIVAL_TYPE_DISCRETE;
@@ -1182,8 +990,6 @@ static int viacam_enum_frameintervals(struct file *filp, void *priv,
return 0;
}
-
-
static const struct v4l2_ioctl_ops viacam_ioctl_ops = {
.vidioc_enum_input = viacam_enum_input,
.vidioc_g_input = viacam_g_input,
@@ -1193,12 +999,15 @@ static const struct v4l2_ioctl_ops viacam_ioctl_ops = {
.vidioc_g_fmt_vid_cap = viacam_g_fmt_vid_cap,
.vidioc_s_fmt_vid_cap = viacam_s_fmt_vid_cap,
.vidioc_querycap = viacam_querycap,
- .vidioc_reqbufs = viacam_reqbufs,
- .vidioc_querybuf = viacam_querybuf,
- .vidioc_qbuf = viacam_qbuf,
- .vidioc_dqbuf = viacam_dqbuf,
- .vidioc_streamon = viacam_streamon,
- .vidioc_streamoff = viacam_streamoff,
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
.vidioc_g_parm = viacam_g_parm,
.vidioc_s_parm = viacam_s_parm,
.vidioc_enum_framesizes = viacam_enum_framesizes,
@@ -1242,7 +1051,7 @@ static int viacam_resume(void *priv)
/*
* Make sure the sensor's power state is correct
*/
- if (cam->users > 0)
+ if (!list_empty(&cam->vdev.fh_list))
via_sensor_power_up(cam);
else
via_sensor_power_down(cam);
@@ -1327,6 +1136,7 @@ static int viacam_probe(struct platform_device *pdev)
int ret;
struct i2c_adapter *sensor_adapter;
struct viafb_dev *viadev = pdev->dev.platform_data;
+ struct vb2_queue *vq;
struct i2c_board_info ov7670_info = {
.type = "ov7670",
.addr = 0x42 >> 1,
@@ -1370,8 +1180,6 @@ static int viacam_probe(struct platform_device *pdev)
via_cam_info = cam;
cam->platdev = pdev;
cam->viadev = viadev;
- cam->users = 0;
- cam->owner = NULL;
cam->opstate = S_IDLE;
cam->user_format = cam->sensor_format = viacam_def_pix_format;
mutex_init(&cam->lock);
@@ -1432,11 +1240,27 @@ static int viacam_probe(struct platform_device *pdev)
viacam_irq, IRQF_SHARED, "via-camera", cam);
if (ret)
goto out_power_down;
+
+ vq = &cam->vq;
+ vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
+ vq->drv_priv = cam;
+ vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ vq->buf_struct_size = sizeof(struct via_buffer);
+ vq->dev = cam->v4l2_dev.dev;
+
+ vq->ops = &viacam_vb2_ops;
+ vq->mem_ops = &vb2_dma_sg_memops;
+ vq->lock = &cam->lock;
+
+ ret = vb2_queue_init(vq);
/*
* Tell V4l2 that we exist.
*/
cam->vdev = viacam_v4l_template;
cam->vdev.v4l2_dev = &cam->v4l2_dev;
+ cam->vdev.lock = &cam->lock;
+ cam->vdev.queue = vq;
video_set_drvdata(&cam->vdev, cam);
ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1);
if (ret)
--
2.20.1
