Re: [PATCH v3 3/3] media: stm32-dcmi: add support of several sub-devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/2/19 5:52 PM, Hugues Fruchet wrote:
> Add support of several sub-devices within pipeline instead
> of a single one.
> This allows to support a CSI-2 camera sensor connected
> through a CSI-2 to parallel bridge.
> 
> Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxx>
> ---
>  drivers/media/platform/stm32/stm32-dcmi.c | 204 +++++++++++++++++++++++++++---
>  1 file changed, 186 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
> index 6f37617..6921e6b 100644
> --- a/drivers/media/platform/stm32/stm32-dcmi.c
> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
> @@ -172,6 +172,7 @@ struct stm32_dcmi {
>  
>  	struct media_device		mdev;
>  	struct media_pad		vid_cap_pad;
> +	struct media_pipeline		pipeline;
>  };
>  
>  static inline struct stm32_dcmi *notifier_to_dcmi(struct v4l2_async_notifier *n)
> @@ -583,6 +584,131 @@ static void dcmi_buf_queue(struct vb2_buffer *vb)
>  	spin_unlock_irq(&dcmi->irqlock);
>  }
>  
> +static struct media_entity *dcmi_find_source(struct stm32_dcmi *dcmi)
> +{
> +	struct media_entity *entity = &dcmi->vdev->entity;
> +	struct media_pad *pad;
> +
> +	/* Walk searching for entity having no sink */
> +	while (1) {
> +		pad = &entity->pads[0];
> +		if (!(pad->flags & MEDIA_PAD_FL_SINK))
> +			break;
> +
> +		pad = media_entity_remote_pad(pad);
> +		if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
> +			break;
> +
> +		entity = pad->entity;
> +	}
> +
> +	return entity;
> +}
> +
> +static int dcmi_pipeline_s_fmt(struct stm32_dcmi *dcmi,
> +			       struct v4l2_subdev_pad_config *pad_cfg,
> +			       struct v4l2_subdev_format *format)
> +{
> +	struct media_entity *entity = &dcmi->entity.source->entity;
> +	struct v4l2_subdev *subdev;
> +	struct media_pad *sink_pad = NULL;
> +	struct media_pad *src_pad = NULL;
> +	struct media_pad *pad = NULL;
> +	struct v4l2_subdev_format fmt = *format;
> +	bool found = false;
> +	int ret;
> +
> +	/*
> +	 * Starting from sensor subdevice, walk within
> +	 * pipeline and set format on each subdevice
> +	 */
> +	while (1) {
> +		unsigned int i;
> +
> +		/* Search if current entity has a source pad */
> +		for (i = 0; i < entity->num_pads; i++) {
> +			pad = &entity->pads[i];
> +			if (pad->flags & MEDIA_PAD_FL_SOURCE) {
> +				src_pad = pad;
> +				found = true;
> +				break;
> +			}
> +		}
> +		if (!found)
> +			break;
> +
> +		subdev = media_entity_to_v4l2_subdev(entity);
> +
> +		/* Propagate format on sink pad if any, otherwise source pad */
> +		if (sink_pad)
> +			pad = sink_pad;
> +
> +		dev_dbg(dcmi->dev, "%s[%d] pad format set to 0x%x %ux%u\n",
> +			subdev->name, pad->index, format->format.code,
> +			format->format.width, format->format.height);
> +
> +		fmt.pad = pad->index;
> +		ret = v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
> +		if (ret < 0)
> +			return ret;
> +
> +		/* Walk to next entity */
> +		sink_pad = media_entity_remote_pad(src_pad);
> +		if (!sink_pad || !is_media_entity_v4l2_subdev(sink_pad->entity))
> +			break;
> +
> +		entity = sink_pad->entity;
> +	}
> +	*format = fmt;
> +
> +	return 0;
> +}
> +
> +static int dcmi_pipeline_s_stream(struct stm32_dcmi *dcmi, int state)
> +{
> +	struct media_entity *entity = &dcmi->vdev->entity;
> +	struct v4l2_subdev *subdev;
> +	struct media_pad *pad;
> +	int ret;
> +
> +	/* Start/stop all entities within pipeline */
> +	while (1) {
> +		pad = &entity->pads[0];
> +		if (!(pad->flags & MEDIA_PAD_FL_SINK))
> +			break;
> +
> +		pad = media_entity_remote_pad(pad);
> +		if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
> +			break;
> +
> +		entity = pad->entity;
> +		subdev = media_entity_to_v4l2_subdev(entity);
> +
> +		ret = v4l2_subdev_call(subdev, video, s_stream, state);
> +		if (ret < 0 && ret != -ENOIOCTLCMD) {
> +			dev_err(dcmi->dev, "%s: %s failed to %s streaming (%d)\n",
> +				__func__, subdev->name,
> +				state ? "start" : "stop", ret);
> +			return ret;
> +		}
> +
> +		dev_dbg(dcmi->dev, "%s is %s\n",
> +			subdev->name, state ? "started" : "stopped");
> +	}
> +
> +	return 0;
> +}
> +
> +static int dcmi_pipeline_start(struct stm32_dcmi *dcmi)
> +{
> +	return dcmi_pipeline_s_stream(dcmi, 1);
> +}
> +
> +static void dcmi_pipeline_stop(struct stm32_dcmi *dcmi)
> +{
> +	dcmi_pipeline_s_stream(dcmi, 0);
> +}
> +
>  static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>  {
>  	struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
> @@ -597,14 +723,17 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>  		goto err_release_buffers;
>  	}
>  
> -	/* Enable stream on the sub device */
> -	ret = v4l2_subdev_call(dcmi->entity.source, video, s_stream, 1);
> -	if (ret && ret != -ENOIOCTLCMD) {
> -		dev_err(dcmi->dev, "%s: Failed to start streaming, subdev streamon error",
> -			__func__);
> +	ret = media_pipeline_start(&dcmi->vdev->entity, &dcmi->pipeline);
> +	if (ret < 0) {
> +		dev_err(dcmi->dev, "%s: Failed to start streaming, media pipeline start error (%d)\n",
> +			__func__, ret);
>  		goto err_pm_put;
>  	}
>  
> +	ret = dcmi_pipeline_start(dcmi);
> +	if (ret)
> +		goto err_media_pipeline_stop;
> +
>  	spin_lock_irq(&dcmi->irqlock);
>  
>  	/* Set bus width */
> @@ -676,7 +805,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>  	if (ret) {
>  		dev_err(dcmi->dev, "%s: Start streaming failed, cannot start capture\n",
>  			__func__);
> -		goto err_subdev_streamoff;
> +		goto err_pipeline_stop;
>  	}
>  
>  	/* Enable interruptions */
> @@ -687,8 +816,11 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>  
>  	return 0;
>  
> -err_subdev_streamoff:
> -	v4l2_subdev_call(dcmi->entity.source, video, s_stream, 0);
> +err_pipeline_stop:
> +	dcmi_pipeline_stop(dcmi);
> +
> +err_media_pipeline_stop:
> +	media_pipeline_stop(&dcmi->vdev->entity);
>  
>  err_pm_put:
>  	pm_runtime_put(dcmi->dev);
> @@ -713,13 +845,10 @@ static void dcmi_stop_streaming(struct vb2_queue *vq)
>  {
>  	struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
>  	struct dcmi_buf *buf, *node;
> -	int ret;
>  
> -	/* Disable stream on the sub device */
> -	ret = v4l2_subdev_call(dcmi->entity.source, video, s_stream, 0);
> -	if (ret && ret != -ENOIOCTLCMD)
> -		dev_err(dcmi->dev, "%s: Failed to stop streaming, subdev streamoff error (%d)\n",
> -			__func__, ret);
> +	dcmi_pipeline_stop(dcmi);
> +
> +	media_pipeline_stop(&dcmi->vdev->entity);
>  
>  	spin_lock_irq(&dcmi->irqlock);
>  
> @@ -937,8 +1066,7 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
>  	mf->width = sd_framesize.width;
>  	mf->height = sd_framesize.height;
>  
> -	ret = v4l2_subdev_call(dcmi->entity.source, pad,
> -			       set_fmt, NULL, &format);
> +	ret = dcmi_pipeline_s_fmt(dcmi, NULL, &format);
>  	if (ret < 0)
>  		return ret;
>  
> @@ -1529,7 +1657,20 @@ static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier)
>  	struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier);
>  	int ret;
>  
> +	/*
> +	 * Now that the graph is complete,
> +	 * we search for the source subdevice
> +	 * in order to expose it through V4L2 interface
> +	 */
> +	dcmi->entity.source =
> +		media_entity_to_v4l2_subdev(dcmi_find_source(dcmi));
> +	if (!dcmi->entity.source) {
> +		dev_err(dcmi->dev, "Source subdevice not found\n");
> +		return -ENODEV;
> +	}
> +
>  	dcmi->vdev->ctrl_handler = dcmi->entity.source->ctrl_handler;
> +
>  	ret = dcmi_formats_init(dcmi);
>  	if (ret) {
>  		dev_err(dcmi->dev, "No supported mediabus format found\n");
> @@ -1574,12 +1715,30 @@ static int dcmi_graph_notify_bound(struct v4l2_async_notifier *notifier,
>  				   struct v4l2_async_subdev *asd)
>  {
>  	struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier);
> +	unsigned int ret;
> +	int src_pad;
>  
>  	dev_dbg(dcmi->dev, "Subdev %s bound\n", subdev->name);
>  
> -	dcmi->entity.source = subdev;
> +	/*
> +	 * Link this sub-device to DCMI, it could be
> +	 * a parallel camera sensor or a bridge
> +	 */
> +	src_pad = media_entity_get_fwnode_pad(&subdev->entity,
> +					      subdev->fwnode,
> +					      MEDIA_PAD_FL_SOURCE);
> +
> +	ret = media_create_pad_link(&subdev->entity, src_pad,
> +				    &dcmi->vdev->entity, 0,
> +				    MEDIA_LNK_FL_IMMUTABLE |
> +				    MEDIA_LNK_FL_ENABLED);
> +	if (ret)
> +		dev_err(dcmi->dev, "Failed to create media pad link with subdev %s\n",
> +			subdev->name);
> +	else
> +		dev_dbg(dcmi->dev, "DCMI is now linked to %s\n", subdev->name);
>  
> -	return 0;
> +	return ret;
>  }
>  
>  static const struct v4l2_async_notifier_operations dcmi_graph_notify_ops = {
> @@ -1639,6 +1798,15 @@ static int dcmi_graph_init(struct stm32_dcmi *dcmi)
>  		return ret;
>  	}
>  
> +	/* Register all the subdev nodes */
> +	ret = v4l2_device_register_subdev_nodes(&dcmi->v4l2_dev);

This shouldn't be needed. Only MC-centric drivers (i.e. where the pipeline
has to be configured by userspace) need to do this.

Otherwise this patch looks good.

Regards,

	Hans

> +	if (ret) {
> +		dev_err(dcmi->dev, "Failed to register subdev nodes\n");
> +		v4l2_async_notifier_unregister(&dcmi->notifier);
> +		of_node_put(dcmi->entity.remote_node);
> +		return ret;
> +	}
> +
>  	return 0;
>  }
>  
> 




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux