On 7/17/19 9:25 PM, Sean Young wrote:
On Wed, Jul 17, 2019 at 08:11:50PM +0200, Jan Pieter van Woerkom wrote:
The T230C v2 hardware needs a mode of the si2168 chip to be
set for which the si2168 driver previously had no support.
This patch uses a specific measure to configure this on the
T230C v2 hardware only - see the flag passed via the ts_mode
attribute and its dependency on USB_PID_MYGICA_T230C2.
Signed-off-by: Jan Pieter van Woerkom <jp@xxxxxxx>
Tested-by: Frank Rysanek <Frantisek.Rysanek@xxxxxxx>
---
diff -ru a/drivers/media/dvb-frontends/si2168.c b/drivers/media/dvb-frontends/si2168.c
--- a/drivers/media/dvb-frontends/si2168.c 2019-07-08 00:41:56.000000000 +0200
+++ b/drivers/media/dvb-frontends/si2168.c 2019-07-16 21:21:39.267802750 +0200
@@ -82,8 +82,18 @@
dev_dbg(&client->dev, "%s acquire: %d\n", __func__, acquire);
+ /* set manual value */
+ if (dev->ts_mode & SI2168_TS_CLK_MANUAL) {
+ memcpy(cmd.args, "\x14\x00\x0d\x10\xe8\x03", 6);
+ cmd.wlen = 6;
+ cmd.rlen = 4;
+ ret = si2168_cmd_execute(client, &cmd);
+ if (ret)
+ return ret;
+ }
/* set TS_MODE property */
memcpy(cmd.args, "\x14\x00\x01\x10\x10\x00", 6);
+ cmd.args[4] <<= (dev->ts_mode & SI2168_TS_CLK_MANUAL) >> 5;
I'm sorry but this is not very readable. How about:
if (dev->ts_mode & SI2168_TS_CLK_MANUAL)
cmd.args[4] = SI2168_TS_CLK_MANUAL;
?
Yes you're right. I'll post update in this thread.
Sean
if (acquire)
cmd.args[4] |= dev->ts_mode;
else
diff -ru a/drivers/media/dvb-frontends/si2168.h b/drivers/media/dvb-frontends/si2168.h
--- a/drivers/media/dvb-frontends/si2168.h 2019-07-08 00:41:56.000000000 +0200
+++ b/drivers/media/dvb-frontends/si2168.h 2019-07-16 06:29:53.913009262 +0200
@@ -30,6 +30,7 @@
#define SI2168_TS_PARALLEL 0x06
#define SI2168_TS_SERIAL 0x03
#define SI2168_TS_TRISTATE 0x00
+#define SI2168_TS_CLK_MANUAL 0x20
u8 ts_mode;
/* TS clock inverted */
