Re: [RFC] SW connection between DVB Transport Stream demuxer and I2C-based frontend

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 08, 2019 at 07:58:00PM +0000, Peter Rosin wrote:
> On 2019-07-08 13:08, Marc Gonzalez wrote:
[...]
> > +	dvb_demod: si2168@64 {
> > +		compatible = "silabs,si2168";
> > +		reg = <0x64>;
> > +		reset-gpios = <&tlmm 84 GPIO_ACTIVE_LOW>;
> 
> 
> In principle, I think you should be able to add something like this here:
> 
> 		i2c-gate {
> 			#address-cells = <1>;
> 			#size-cells = <0>;
> 
> 			tuner@60 {
> 				compatible = "silabs,si2157";
> 				reg = <0x60>;
> 				/* whatever else is needed */
> 			};
> 		};
> 
> But in practice, I don't know if the si2157 driver understands that or
> if there is anything else that gets in the way. Totally untested...

So far, both drivers don't deal with devicetree at all, and there are no
bindings, so we have the chance to write the best bindings possible.

An i2c-gate subnode on the si2168 node looks good to me, FWIW.


Greetings,
Jonathan Neuschäfer

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux