Two typos for imx8mm:
On 6/12/19 11:39 AM, Philipp Zabel wrote:
> Add devicetree binding documentation for the Hantro G1/G2 VPU on i.MX8MQ
> and for the Hantro G1/G2/H1 VPU on i.MX8MM.
>
> Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/media/imx8m-vpu.txt | 56 +++++++++++++++++++
> 1 file changed, 56 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/imx8m-vpu.txt
>
> diff --git a/Documentation/devicetree/bindings/media/imx8m-vpu.txt b/Documentation/devicetree/bindings/media/imx8m-vpu.txt
> new file mode 100644
> index 000000000000..659bd28dd002
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/imx8m-vpu.txt
> @@ -0,0 +1,56 @@
> +device-tree bindings for Hantro G1/G2/H1 VPU codecs implemented on i.MX8M SoCs
> +
> +Required properties:
> +- compatible: value should be one of the following
> + "nxp,imx8mq-vpu",
> + "nxp,imx8mm-vpu";
> +- regs: VPU core and control block register ranges
> +- reg-names: should be
> + "g1", "g2", "ctrl" on i.MX8MQ,
> + "g1", "g2", "h1", "ctrl" on i.MX8MM.
> +- interrupts: encoding and decoding interrupt specifiers
> +- interrupt-names: should be
> + "g1", "g2" on i.MX8MQ,
> + "g1", "g2", "h1" on i.MX8MM.
> +- clocks: phandle to VPU core clocks and bus clock
> +- clock-names: should be
> + "g1", "g2", "bus" on i.MX8MQ,
> + "g1", "g2", "h1", "bus" on i.MX8MM.
> +- power-domains: phandle to power domain node
> +
> +Examples:
> +
> + vpu: vpu@38300000 {
> + compatible = "nxp,imx8mq-vpu";
> + reg = <0x38300000 0x10000>,
> + <0x38310000 0x10000>,
> + <0x38320000 0x10000>;
> + reg-names = "g1", "g2", "ctrl";
> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "g1", "g2";
> + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
> + <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
> + <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> + clock-names = "g1", "g2", "bus";
> + power-domains = <&pgc_vpu>;
> + };
> +
> + vpu: vpu@38300000 {
> + compatible = "nxp,imx8mm-vpu";
> + reg = <0x38300000 0x10000>,
> + <0x38310000 0x10000>,
> + <0x38320000 0x10000>;
; -> ,
> + <0x38330000 0x10000>;
> + reg-names = "g1", "g2", "h1", "ctrl";
> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
; -> ,
> + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "g1", "g2", "h1";
> + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
> + <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
> + <&clk IMX8MQ_CLK_VPU_H1_ROOT>,
> + <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> + clock-names = "g1", "g2", "h1", "bus";
> + power-domains = <&pgc_vpu>;
> + };
>
Regards,
Hans
