On Thu, May 16, 2019 at 11:23:29AM +0800, Daoyuan Huang wrote:
> From: daoyuan huang <daoyuan.huang@xxxxxxxxxxxx>
>
> This patch adds DT binding document for Media Data Path 3 (MDP3)
> a unit in multimedia system used for scaling and color format convert.
>
> Signed-off-by: Ping-Hsun Wu <ping-hsun.wu@xxxxxxxxxxxx>
> Signed-off-by: daoyuan huang <daoyuan.huang@xxxxxxxxxxxx>
> ---
> .../bindings/media/mediatek,mt8183-mdp3.txt | 217 ++++++++++++++++++
> 1 file changed, 217 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt b/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
> new file mode 100644
> index 000000000000..cf3e808b7146
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
> @@ -0,0 +1,217 @@
> +* Mediatek Media Data Path 3
> +
> +Media Data Path 3 (MDP3) is used for scaling and color space conversion.
> +
> +Required properties (controller node):
> +- compatible: "mediatek,mt8183-mdp"
> +- mediatek,scp: the node of system control processor (SCP), using the
> + remoteproc & rpmsg framework, see
> + Documentation/devicetree/bindings/remoteproc/mtk,scp.txt for details.
> +- mediatek,mmsys: the node of mux(multiplexer) controller for HW connections.
> +- mediatek,mm-mutex: the node of sof(start of frame) signal controller.
> +- mediatek,mailbox-gce: the node of global command engine (GCE), used to
> + read/write registers with critical time limitation, see
> + Documentation/devicetree/bindings/mailbox/mtk-gce.txt for details.
> +- mboxes: mailbox number used to communicate with GCE.
> +- gce-subsys: sub-system id corresponding to the register address.
> +- gce-event-names: in use event name list, used to correspond to event IDs.
> +- gce-events: in use event IDs list, all IDs are defined in
> + 'dt-bindings/gce/mt8183-gce.h'.
> +
> +Required properties (all function blocks, child node):
> +- compatible: Should be one of
> + "mediatek,mt8183-mdp-rdma" - read DMA
> + "mediatek,mt8183-mdp-rsz" - resizer
> + "mediatek,mt8183-mdp-wdma" - write DMA
> + "mediatek,mt8183-mdp-wrot" - write DMA with rotation
> + "mediatek,mt8183-mdp-ccorr" - color correction with 3X3 matrix
> +- reg: Physical base address and length of the function block register space
> +- clocks: device clocks, see
> + Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- power-domains: a phandle to the power domain, see
> + Documentation/devicetree/bindings/power/power_domain.txt for details.
> +- mediatek,mdp-id: HW index to distinguish same functionality modules.
> +
> +Required properties (DMA function blocks, child node):
> +- compatible: Should be one of
> + "mediatek,mt8183-mdp-rdma"
> + "mediatek,mt8183-mdp-wdma"
> + "mediatek,mt8183-mdp-wrot"
> +- iommus: should point to the respective IOMMU block with master port as
> + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> + for details.
> +- mediatek,larb: must contain the local arbiters in the current Socs, see
> + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> + for details.
> +
> +Required properties (input path selection node):
> +- compatible:
> + "mediatek,mt8183-mdp-dl" - MDP direct link input source selection
> +- reg: Physical base address and length of the function block register space
> +- clocks: device clocks, see
> + Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- mediatek,mdp-id: HW index to distinguish same functionality modules.
> +
> +Required properties (ISP PASS2 (DIP) module path selection node):
> +- compatible:
> + "mediatek,mt8183-mdp-imgi" - input DMA of ISP PASS2 (DIP) module for raw image input
> +- reg: Physical base address and length of the function block register space
> +- mediatek,mdp-id: HW index to distinguish same functionality modules.
> +
> +Required properties (SW node):
> +- compatible: Should be one of
> + "mediatek,mt8183-mdp-exto" - output DMA of ISP PASS2 (DIP) module for yuv image output
> + "mediatek,mt8183-mdp-path" - MDP output path selection
> +- mediatek,mdp-id: HW index to distinguish same functionality modules.
> +
> +Example:
> + mdp_camin@14000000 {
s/_/-/ in node names
> + compatible = "mediatek,mt8183-mdp-dl";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x14000000 0 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_DL_TXCK>,
> + <&mmsys CLK_MM_MDP_DL_RX>;
> + };
> +
> + mdp_camin2@14000000 {
> + compatible = "mediatek,mt8183-mdp-dl";
> + mediatek,mdp-id = <1>;
> + reg = <0 0x14000000 0 0x1000>;
You've got 2 nodes at the same address. You can't do that.
Build your dtb with W=1 and dtc will warn on this. And fix any other
warnings you get.
> + clocks = <&mmsys CLK_MM_IPU_DL_TXCK>,
> + <&mmsys CLK_MM_IPU_DL_RX>;
> + };
> +
> + mdp_rdma0: mdp_rdma0@14001000 {
> + compatible = "mediatek,mt8183-mdp-rdma", "mediatek,mt8183-mdp3";
> + mediatek,scp = <&scp>;
> + mediatek,mdp-id = <0>;
> + reg = <0 0x14001000 0 0x1000>;
> + power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_MDP_RDMA0>,
> + <&mmsys CLK_MM_MDP_RSZ1>;
> + iommus = <&iommu M4U_PORT_MDP_RDMA0>;
> + mediatek,larb = <&larb0>;
> + mediatek,mmsys = <&mmsys>;
> + mediatek,mm-mutex = <&mutex>;
> + mediatek,mailbox-gce = <&gce>;
> + mboxes = <&gce 20 0 CMDQ_THR_PRIO_LOWEST>,
> + <&gce 21 0 CMDQ_THR_PRIO_LOWEST>,
> + <&gce 22 0 CMDQ_THR_PRIO_LOWEST>,
> + <&gce 23 0 CMDQ_THR_PRIO_LOWEST>;
> + gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> + <&gce 0x14010000 SUBSYS_1401XXXX>,
> + <&gce 0x14020000 SUBSYS_1402XXXX>,
> + <&gce 0x15020000 SUBSYS_1502XXXX>;
> + gce-event-names = "rdma0_sof",
> + "rsz0_sof",
> + "rsz1_sof",
> + "tdshp0_sof",
> + "wrot0_sof",
> + "wdma0_sof",
> + "rdma0_done",
> + "wrot0_done",
> + "wdma0_done",
> + "isp_p2_0_done",
> + "isp_p2_1_done",
> + "isp_p2_2_done",
> + "isp_p2_3_done",
> + "isp_p2_4_done",
> + "isp_p2_5_done",
> + "isp_p2_6_done",
> + "isp_p2_7_done",
> + "isp_p2_8_done",
> + "isp_p2_9_done",
> + "isp_p2_10_done",
> + "isp_p2_11_done",
> + "isp_p2_12_done",
> + "isp_p2_13_done",
> + "isp_p2_14_done",
> + "wpe_done",
> + "wpe_b_done";
> + gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
> + <&gce CMDQ_EVENT_MDP_RSZ0_SOF>,
> + <&gce CMDQ_EVENT_MDP_RSZ1_SOF>,
> + <&gce CMDQ_EVENT_MDP_TDSHP_SOF>,
> + <&gce CMDQ_EVENT_MDP_WROT0_SOF>,
> + <&gce CMDQ_EVENT_MDP_WDMA0_SOF>,
> + <&gce CMDQ_EVENT_MDP_RDMA0_EOF>,
> + <&gce CMDQ_EVENT_MDP_WROT0_EOF>,
> + <&gce CMDQ_EVENT_MDP_WDMA0_EOF>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_0>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_1>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_2>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_3>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_4>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_5>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_6>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_7>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_8>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_9>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_10>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_11>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_12>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_13>,
> + <&gce CMDQ_EVENT_ISP_FRAME_DONE_P2_14>,
> + <&gce CMDQ_EVENT_WPE_A_DONE>,
> + <&gce CMDQ_EVENT_SPE_B_DONE>;
> + };
> +
> + mdp_imgi@15020000 {
> + compatible = "mediatek,mt8183-mdp-imgi";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x15020000 0 0x1000>;
> + };
> +
> + mdp_img2o@15020000 {
> + compatible = "mediatek,mt8183-mdp-exto";
> + mediatek,mdp-id = <1>;
Missing reg? Again, looks like 2 nodes at the same address.
> + };
> +
> + mdp_rsz0: mdp_rsz0@14003000 {
> + compatible = "mediatek,mt8183-mdp-rsz";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x14003000 0 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_RSZ0>;
> + };
> +
> + mdp_rsz1: mdp_rsz1@14004000 {
> + compatible = "mediatek,mt8183-mdp-rsz";
> + mediatek,mdp-id = <1>;
> + reg = <0 0x14004000 0 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_RSZ1>;
> + };
> +
> + mdp_wrot0: mdp_wrot0@14005000 {
> + compatible = "mediatek,mt8183-mdp-wrot";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x14005000 0 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_WROT0>;
> + iommus = <&iommu M4U_PORT_MDP_WROT0>;
> + mediatek,larb = <&larb0>;
> + };
> +
> + mdp_path0_sout@14005000 {
> + compatible = "mediatek,mt8183-mdp-path";
> + mediatek,mdp-id = <0>;
Missing reg? Again, looks like 2 nodes at the same address.
> + };
> +
> + mdp_wdma: mdp_wdma@14006000 {
> + compatible = "mediatek,mt8183-mdp-wdma";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x14006000 0 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_WDMA0>;
> + iommus = <&iommu M4U_PORT_MDP_WDMA0>;
> + mediatek,larb = <&larb0>;
> + };
> +
> + mdp_path1_sout@14006000 {
> + compatible = "mediatek,mt8183-mdp-path";
> + mediatek,mdp-id = <1>;
> + };
> +
> + mdp_ccorr: mdp_ccorr@1401c000 {
> + compatible = "mediatek,mt8183-mdp-ccorr";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x1401c000 0 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_CCORR>;
> + };
> --
> 2.18.0
>
