Hi Hans
> > > On Wednesday 27 January 2010 06:36:37 Dmitri Belimov wrote:
> > > > Hi Hans.
> > > >
> > > > I finished saa7134 part of SPI. Please review saa7134-spi.c and
> > > > diff saa7134-core and etc. I wrote config of SPI to board
> > > > structure. Use this config for register master and slave
> > > > devices.
> > > >
> > > > SPI other then I2C, do not need call request_module. Udev do
> > > > it. I spend 10 days for understanding :(
> > >
> > > I'm almost certain that spi works the same way as i2c and that
> > > means that you must call request_module. Yes, udev will load it
> > > for you, but that is a delayed load: i.e. the module may not be
> > > loaded when we need it. The idea behind this is that usually i2c
> > > or spi modules are standalone, but in the context of v4l such
> > > modules are required to be present before the bridge can properly
> > > configure itself.
> > >
> > > The easiest way to ensure the correct load sequence is to do a
> > > request_module at the start.
> > >
> > > Now, I haven't compiled this, but I think this will work:
> > >
> > > struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device
> > > *v4l2_dev, struct spi_master *master, struct spi_board_info *info)
> > > {
> > > struct v4l2_subdev *sd = NULL;
> > > struct spi_device *spi;
> > >
> > > BUG_ON(!v4l2_dev);
> > >
> > > if (module_name)
> > > request_module(module_name);
>
> There is one thing missing here: module_name should be passed in as
> argument to v4l2_spi_new_subdev. Does this code actually compile? If
> so, then I suspect module_name must be some global variable with some
> bogus value which causes request_module to time out.
>
> > [ 240.476082] [<f84c8f3b>] ? v4l2_spi_new_subdev_board+0x2e/0x35
> > [v4l2_common] [ 240.476086] [<f84c8fa6>] ?
> > v4l2_spi_new_subdev+0x64/0x6c [v4l2_common]
>
> Remove v4l2_spi_new_subdev_board. Just have a v4l2_spi_new_subdev as
> in my code.
I found my error. Calling request_module befor spi_new_device is good.
As I see new v4l2_subdev ops hooked and calling
[ 52.796008] DEBUG uPD61151: upd61151_s_std
My next task move our MPEG2 code to upd61151.c
Please review my changes for v4l2_spi_new_subdev.
[ 4.743008] Linux video capture interface: v2.00
[ 4.788866] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 4.788946] saa7134 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.788996] saa7133[0]: found at 0000:04:01.0, rev: 209, irq: 19, latency: 32, mmio: 0xe5100000
[ 4.789055] saa7133[0]: subsystem: 5ace:7595, board: Beholder BeholdTV X7 [card=171,autodetected]
[ 4.789122] saa7133[0]: board init: gpio is 200000
[ 4.789172] IRQ 19/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 4.868459] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.868533] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.952004] saa7133[0]: i2c eeprom 00: ce 5a 95 75 54 20 00 00 00 00 00 00 00 00 00 01
[ 4.952604] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.953202] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.953799] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.954397] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.954994] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.955592] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.956200] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.956798] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.957395] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.957993] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.958591] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.959189] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.959786] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.960394] saa7133[0]: i2c eeprom e0: 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.960991] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
[ 5.012044] tuner 1-0061: chip found @ 0xc2 (saa7133[0])
[ 5.128672] xc5000 1-0061: creating new instance
[ 5.136014] xc5000: Successfully identified at address 0x61
[ 5.136067] xc5000: Firmware has not been loaded previously
[ 33.425823] saa7134 0000:04:01.0: spi master registered: bus_num=32766 num_chipselect=1
[ 33.425883] saa7133[0]: found muPD61151 MPEG encoder
[ 33.425928] befor request_module upd61151
[ 33.435609] upd61151_probe function
[ 33.435654] Read test REG 0xD8 :
[ 33.437463] REG = 0x0
[ 33.437505] Write test 0x03 to REG 0xD8 :
[ 33.439310] Next read test REG 0xD8 :
[ 33.441123] REG = 0x3
[ 33.441167] befor spi_get_drvdata
[ 33.441210] subdev pointer = f646e7c0
[ 33.441253] befor register_subdev
[ 33.441297] DEBIG SPI:
[ 33.441298] spi pointer = f7087580
[ 33.441298] spi->dev.driver = f873dd70
[ 33.441299] sd pointer = f646e7c0
[ 33.441579] saa7133[0]: registered device video0 [v4l2]
[ 33.441640] saa7133[0]: registered device vbi0
[ 33.441700] saa7133[0]: registered device radio0
[ 33.459770] saa7133[0]: registered device video1 [mpeg]
[ 33.486244] saa7134 ALSA driver for DMA sound loaded
[ 33.486301] IRQ 19/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 33.486364] saa7133[0]/alsa: saa7133[0] at 0xe5100000 irq 19 registered as card -1
[ 48.557569] xc5000: I2C write failed (len=4)
[ 48.660019] xc5000: I2C write failed (len=4)
[ 48.662966] xc5000: I2C read failed
[ 48.663016] xc5000: I2C read failed
[ 48.663060] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)...
[ 48.663108] saa7134 0000:04:01.0: firmware: requesting dvb-fe-xc5000-1.6.114.fw
[ 48.705533] xc5000: firmware read 12401 bytes.
[ 48.705535] xc5000: firmware uploading...
[ 52.044007] xc5000: firmware upload complete...
[ 52.796008] DEBUG uPD61151: upd61151_s_std
[ 52.796058] DEBUG uPD61151: upd61151_s_std
[ 53.268008] DEBUG uPD61151: upd61151_s_std
[ 53.268060] DEBUG uPD61151: upd61151_s_std
[ 53.270837] ------------[ cut here ]------------
[ 53.270884] kernel BUG at lib/kernel_lock.c:126!
[ 53.270929] invalid opcode: 0000 [#1] SMP
[ 53.271037] last sysfs file: /sys/class/firmware/0000:04:01.0/loading
[ 53.271084] Modules linked in: ipv6 dm_snapshot dm_mirror dm_region_hash dm_log dm_mod loop saa7134_alsa saa7134_empress upd61151 ir_kbd_i2c xc5000 tuner snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy saa7134 ir_common v4l2_common videodev snd_seq_oss v4l1_compat videobuf_dma_sg videobuf_core spi_bitbang snd_seq_midi ir_core snd_rawmidi tveeprom psmouse snd_seq_midi_event serio_raw snd_seq snd_timer snd_seq_device i2c_i801 i2c_core rng_core pcspkr snd soundcore parport_pc parport snd_page_alloc button processor intel_agp agpgart evdev ext3 jbd mbcache sg sr_mod cdrom sd_mod ata_generic ata_piix libata scsi_mod ehci_hcd ide_pci_generic uhci_hcd ide_core usbcore r8169 mii thermal fan thermal_sys [last unloaded: scsi_wait_scan]
[ 53.273694]
[ 53.273737] Pid: 2675, comm: hald-probe-vide Not tainted (2.6.30.5 #1) G31M-ES2L
[ 53.273793] EIP: 0060:[<c02f81e3>] EFLAGS: 00010286 CPU: 0
[ 53.273841] EIP is at unlock_kernel+0xd/0x24
[ 53.273885] EAX: f6b7f6ac EBX: f6b7f000 ECX: f6b7f6ac EDX: f7168b20
[ 53.273932] ESI: 00000000 EDI: f6860640 EBP: f6b7f6ac ESP: f66c9e68
[ 53.273978] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 53.274024] Process hald-probe-vide (pid: 2675, ti=f66c8000 task=f7168b20 task.ti=f66c8000)
[ 53.274079] Stack:
[ 53.274121] f87499c9 00000000 f69c9804 f6860640 00000000 f8504309 00000000 f6940e00
[ 53.274360] f6940e00 c0190049 f6860640 f6aec86c 00000000 f6860640 00000000 f6aec86c
[ 53.274360] c018ff24 c018c3b9 f701e1c0 f6d148d0 f6860640 f66c9f0c f66c9f0c 00008001
[ 53.274360] Call Trace:
[ 53.274360] [<f87499c9>] ? ts_open+0x8c/0x93 [saa7134_empress]
[ 53.274360] [<f8504309>] ? v4l2_open+0x65/0x78 [videodev]
[ 53.274360] [<c0190049>] ? chrdev_open+0x125/0x13c
[ 53.274360] [<c018ff24>] ? chrdev_open+0x0/0x13c
[ 53.274360] [<c018c3b9>] ? __dentry_open+0x119/0x208
[ 53.274360] [<c018c539>] ? nameidata_to_filp+0x29/0x3c
[ 53.274360] [<c0197338>] ? do_filp_open+0x41e/0x7bc
[ 53.274360] [<c017bb3c>] ? handle_mm_fault+0x294/0x5fd
[ 53.274360] [<c019e267>] ? alloc_fd+0x52/0xb8
[ 53.274360] [<c018c1d1>] ? do_sys_open+0x44/0xb4
[ 53.274360] [<c018c285>] ? sys_open+0x1e/0x23
[ 53.274360] [<c0102f74>] ? sysenter_do_call+0x12/0x28
[ 53.274360] Code: 0f c1 05 e0 4b 3e c0 38 e0 74 09 f3 90 a0 e0 4b 3e c0 eb f3 64 a1 00 b0 43 c0 89 50 14 c3 64 8b 15 00 b0 43 c0 83 7a 14 00 79 04 <0f> 0b eb fe 8b 42 14 48 85 c0 89 42 14 79 07 f0 fe 05 e0 4b 3e
[ 53.274360] EIP: [<c02f81e3>] unlock_kernel+0xd/0x24 SS:ESP 0068:f66c9e68
[ 53.278380] ---[ end trace 717d799b0d534ca3 ]---
With my best regards, Dmitry.
> Regards,
>
> Hans
>
> --
> Hans Verkuil - video4linux developer - sponsored by TANDBERG
diff -r b6b82258cf5e linux/drivers/media/video/saa7134/Makefile
--- a/linux/drivers/media/video/saa7134/Makefile Thu Dec 31 19:14:54 2009 -0200
+++ b/linux/drivers/media/video/saa7134/Makefile Fri Jan 29 09:57:54 2010 +0900
@@ -1,9 +1,9 @@
saa7134-objs := saa7134-cards.o saa7134-core.o saa7134-i2c.o \
saa7134-ts.o saa7134-tvaudio.o saa7134-vbi.o \
- saa7134-video.o saa7134-input.o
+ saa7134-video.o saa7134-input.o saa7134-spi.o
-obj-$(CONFIG_VIDEO_SAA7134) += saa6752hs.o saa7134.o saa7134-empress.o
+obj-$(CONFIG_VIDEO_SAA7134) += saa6752hs.o saa7134.o saa7134-empress.o upd61151.o
obj-$(CONFIG_VIDEO_SAA7134_ALSA) += saa7134-alsa.o
diff -r b6b82258cf5e linux/drivers/media/video/saa7134/saa7134-cards.c
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c Thu Dec 31 19:14:54 2009 -0200
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Jan 29 09:57:54 2010 +0900
@@ -4619,6 +4619,7 @@
.name = name_radio,
.amux = LINE2,
},
+ .encoder_type = SAA7134_ENCODER_SAA6752HS,
.mpeg = SAA7134_MPEG_EMPRESS,
.video_out = CCIR656,
.vid_port_opts = (SET_T_CODE_POLARITY_NON_INVERTED |
@@ -4656,6 +4657,7 @@
.name = name_radio,
.amux = LINE2,
},
+ .encoder_type = SAA7134_ENCODER_SAA6752HS,
.mpeg = SAA7134_MPEG_EMPRESS,
.video_out = CCIR656,
.vid_port_opts = (SET_T_CODE_POLARITY_NON_INVERTED |
@@ -4695,6 +4697,7 @@
.name = name_radio,
.amux = LINE2,
},
+ .encoder_type = SAA7134_ENCODER_SAA6752HS,
.mpeg = SAA7134_MPEG_EMPRESS,
.video_out = CCIR656,
.vid_port_opts = (SET_T_CODE_POLARITY_NON_INVERTED |
@@ -5279,23 +5282,51 @@
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.mpeg = SAA7134_MPEG_DVB,
+ .gpiomask = 0x00860000,
.inputs = { {
.name = name_tv,
.vmux = 2,
.amux = TV,
.tv = 1,
- }, {
- .name = name_comp1,
- .vmux = 0,
- .amux = LINE1,
+ .gpio = 0x00860000
+ }, {
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE1,
+ .gpio = 0x00860000
}, {
.name = name_svideo,
.vmux = 9,
.amux = LINE1,
- } },
- .radio = {
- .name = name_radio,
- .amux = TV,
+ .gpio = 0x00860000
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x00860000
+ },
+ .encoder_type = SAA7134_ENCODER_muPD61151,
+ .mpeg = SAA7134_MPEG_EMPRESS,
+ .video_out = CCIR656,
+ .vid_port_opts = (SET_T_CODE_POLARITY_NON_INVERTED |
+ SET_CLOCK_NOT_DELAYED |
+ SET_CLOCK_INVERTED |
+ SET_VSYNC_OFF),
+ .spi = {
+ .cs = 17,
+ .clock = 18,
+ .mosi = 23,
+ .miso = 21,
+ .num_chipselect = 1,
+ .spi_enable = 1,
+ },
+ .spi_conf = {
+ .modalias = "upd61151",
+ .max_speed_hz = 10000000,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .controller_data = NULL,
+ .platform_data = NULL,
},
},
[SAA7134_BOARD_ZOLID_HYBRID_PCI] = {
diff -r b6b82258cf5e linux/drivers/media/video/saa7134/saa7134-core.c
--- a/linux/drivers/media/video/saa7134/saa7134-core.c Thu Dec 31 19:14:54 2009 -0200
+++ b/linux/drivers/media/video/saa7134/saa7134-core.c Fri Jan 29 09:57:54 2010 +0900
@@ -139,6 +139,18 @@
break;
}
}
+
+unsigned long saa7134_get_gpio(struct saa7134_dev *dev)
+{
+ unsigned long status;
+
+ /* rising SAA7134_GPIO_GPRESCAN reads the status */
+ saa_andorb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN,0);
+ saa_andorb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN,SAA7134_GPIO_GPRESCAN);
+ status = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & 0xfffffff;
+ return status;
+}
+
/* ------------------------------------------------------------------ */
@@ -1057,12 +1069,42 @@
saa7134_hwinit2(dev);
- /* load i2c helpers */
+ /* initialize software SPI bus */
+ if (saa7134_boards[dev->board].spi.spi_enable)
+ {
+ dev->spi = saa7134_boards[dev->board].spi;
+
+ /* register SPI master and SPI slave */
+ if (saa7134_spi_register(dev, &saa7134_boards[dev->board].spi_conf))
+ saa7134_boards[dev->board].spi.spi_enable = 0;
+ }
+
+ /* load bus helpers */
if (card_is_empress(dev)) {
- struct v4l2_subdev *sd =
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ struct v4l2_subdev *sd = NULL;
+
+ dev->encoder_type = saa7134_boards[dev->board].encoder_type;
+
+ switch (dev->encoder_type) {
+ case SAA7134_ENCODER_muPD61151:
+ {
+ printk(KERN_INFO "%s: found muPD61151 MPEG encoder\n", dev->name);
+
+ if (saa7134_boards[dev->board].spi.spi_enable)
+ sd = v4l2_spi_new_subdev(&dev->v4l2_dev, dev->spi_adap, &saa7134_boards[dev->board].spi_conf);
+ }
+ break;
+ case SAA7134_ENCODER_SAA6752HS:
+ {
+ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
"saa6752hs", "saa6752hs",
saa7134_boards[dev->board].empress_addr, NULL);
+ }
+ break;
+ default:
+ printk(KERN_INFO "%s: MPEG encoder is not configured\n", dev->name);
+ break;
+ }
if (sd)
sd->grp_id = GRP_EMPRESS;
@@ -1139,6 +1181,8 @@
return 0;
fail4:
+ if ((card_is_empress(dev)) && (dev->encoder_type == SAA7134_ENCODER_muPD61151))
+ saa7134_spi_unregister(dev);
saa7134_unregister_video(dev);
saa7134_i2c_unregister(dev);
free_irq(pci_dev->irq, dev);
@@ -1412,6 +1456,7 @@
/* ----------------------------------------------------------- */
EXPORT_SYMBOL(saa7134_set_gpio);
+EXPORT_SYMBOL(saa7134_get_gpio);
EXPORT_SYMBOL(saa7134_boards);
/* ----------------- for the DMA sound modules --------------- */
diff -r b6b82258cf5e linux/drivers/media/video/saa7134/saa7134.h
--- a/linux/drivers/media/video/saa7134/saa7134.h Thu Dec 31 19:14:54 2009 -0200
+++ b/linux/drivers/media/video/saa7134/saa7134.h Fri Jan 29 09:57:54 2010 +0900
@@ -30,6 +30,13 @@
#include <linux/notifier.h>
#include <linux/delay.h>
#include <linux/mutex.h>
+
+/* ifdef software SPI insert here start */
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/spi_bitbang.h>
+/* ifdef software SPI insert here stop */
#include <asm/io.h>
@@ -337,6 +344,21 @@
SAA7134_MPEG_TS_SERIAL,
};
+enum saa7134_encoder_type {
+ SAA7134_ENCODER_UNUSED,
+ SAA7134_ENCODER_SAA6752HS,
+ SAA7134_ENCODER_muPD61151,
+};
+
+struct saa7134_software_spi {
+ unsigned char cs:5;
+ unsigned char clock:5;
+ unsigned char mosi:5;
+ unsigned char miso:5;
+ unsigned char num_chipselect:3;
+ unsigned char spi_enable:1;
+};
+
struct saa7134_board {
char *name;
unsigned int audio_clock;
@@ -355,6 +377,10 @@
unsigned char empress_addr;
unsigned char rds_addr;
+ /* SPI info */
+ struct saa7134_software_spi spi;
+ struct spi_board_info spi_conf;
+
unsigned int tda9887_conf;
unsigned int tuner_config;
@@ -362,6 +388,7 @@
enum saa7134_video_out video_out;
enum saa7134_mpeg_type mpeg;
enum saa7134_mpeg_ts_type ts_type;
+ enum saa7134_encoder_type encoder_type;
unsigned int vid_port_opts;
unsigned int ts_force_val:1;
};
@@ -506,6 +533,12 @@
void (*signal_change)(struct saa7134_dev *dev);
};
+struct saa7134_spi_gpio {
+ struct spi_bitbang bitbang;
+ struct spi_master *master;
+ struct saa7134_dev *controller_data;
+};
+
/* global device status */
struct saa7134_dev {
struct list_head devlist;
@@ -553,6 +586,10 @@
struct i2c_client i2c_client;
unsigned char eedata[256];
int has_rds;
+
+ /* software spi */
+ struct saa7134_software_spi spi;
+ struct spi_master *spi_adap;
/* video overlay */
struct v4l2_framebuffer ovbuf;
@@ -615,6 +652,7 @@
atomic_t empress_users;
struct work_struct empress_workqueue;
int empress_started;
+ enum saa7134_encoder_type encoder_type;
#if defined(CONFIG_VIDEO_SAA7134_DVB) || defined(CONFIG_VIDEO_SAA7134_DVB_MODULE)
/* SAA7134_MPEG_DVB only */
@@ -681,6 +719,7 @@
void saa7134_track_gpio(struct saa7134_dev *dev, char *msg);
void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value);
+unsigned long saa7134_get_gpio(struct saa7134_dev *dev);
#define SAA7134_PGTABLE_SIZE 4096
@@ -726,6 +765,11 @@
int saa7134_i2c_register(struct saa7134_dev *dev);
int saa7134_i2c_unregister(struct saa7134_dev *dev);
+/* ----------------------------------------------------------- */
+/* saa7134-spi.c */
+
+int saa7134_spi_register(struct saa7134_dev *dev, struct spi_board_info *info);
+int saa7134_spi_unregister(struct saa7134_dev *dev);
/* ----------------------------------------------------------- */
/* saa7134-video.c */
diff -r b6b82258cf5e linux/drivers/media/video/v4l2-common.c
--- a/linux/drivers/media/video/v4l2-common.c Thu Dec 31 19:14:54 2009 -0200
+++ b/linux/drivers/media/video/v4l2-common.c Fri Jan 29 09:57:54 2010 +0900
@@ -51,6 +51,7 @@
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/i2c.h>
+#include <linux/spi/spi.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/pgtable.h>
@@ -1069,6 +1070,75 @@
#endif /* defined(CONFIG_I2C) */
+//#if defined(CONFIG_SPI) || (defined(CONFIG_SPI_MODULE) && defined(MODULE)) + SPI_BITBANG
+
+/* Load an spi sub-device. */
+
+void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi,
+ const struct v4l2_subdev_ops *ops)
+{
+ v4l2_subdev_init(sd, ops);
+ sd->flags |= V4L2_SUBDEV_FL_IS_SPI;
+ /* the owner is the same as the spi_device's driver owner */
+ sd->owner = spi->dev.driver->owner;
+ /* spi_device and v4l2_subdev point to one another */
+ v4l2_set_subdevdata(sd, spi);
+ spi_set_drvdata(spi, sd);
+ /* initialize name */
+ snprintf(sd->name, sizeof(sd->name), "%s",
+ spi->dev.driver->name);
+}
+EXPORT_SYMBOL_GPL(v4l2_spi_subdev_init);
+
+struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev,
+ struct spi_master *master, struct spi_board_info *info)
+{
+ struct v4l2_subdev *sd = NULL;
+ struct spi_device *spi = NULL;
+
+ BUG_ON(!v4l2_dev);
+
+printk("befor request_module %s\n",info->modalias);
+ if (info->modalias)
+ request_module(info->modalias);
+
+ spi = spi_new_device(master,info);
+
+ if (spi == NULL || spi->dev.driver ==NULL)
+ goto error;
+
+ if (!try_module_get(spi->dev.driver->owner))
+ goto error;
+
+printk("befor spi_get_drvdata\n");
+ sd = spi_get_drvdata(spi);
+printk("subdev pointer = %p\n",sd);
+ /* Register with the v4l2_device which increases the module's
+ use count as well. */
+printk("befor register_subdev\n");
+ if (v4l2_device_register_subdev(v4l2_dev, sd))
+ sd = NULL;
+
+ /* Decrease the module use count to match the first try_module_get. */
+ module_put(spi->dev.driver->owner);
+
+error:
+printk("DEBIG SPI:\n\tspi pointer = %p\n\tspi->dev.driver = %p\n\tsd pointer = %p\n",spi,spi->dev.driver,sd);
+ /* If we have a client but no subdev, then something went wrong and
+ we must unregister the client. */
+ if (spi && sd == NULL)
+ {
+printk("null pointer in SPI part\n");
+
+ spi_unregister_device(spi);
+ }
+
+ return sd;
+}
+EXPORT_SYMBOL_GPL(v4l2_spi_new_subdev);
+
+//#endif /* defined(CONFIG_SPI) */
+
/* Clamp x to be between min and max, aligned to a multiple of 2^align. min
* and max don't have to be aligned, but there must be at least one valid
* value. E.g., min=17,max=31,align=4 is not allowed as there are no multiples
diff -r b6b82258cf5e linux/include/media/v4l2-common.h
--- a/linux/include/media/v4l2-common.h Thu Dec 31 19:14:54 2009 -0200
+++ b/linux/include/media/v4l2-common.h Fri Jan 29 09:57:54 2010 +0900
@@ -191,6 +191,25 @@
/* ------------------------------------------------------------------------- */
+/* SPI Helper functions */
+
+#include <linux/spi/spi.h>
+
+struct spi_device_id;
+struct spi_device;
+
+/* Load an spi module and return an initialized v4l2_subdev struct.
+ Only call request_module if module_name != NULL.
+ The client_type argument is the name of the chip that's on the adapter. */
+struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev,
+ struct spi_master *master, struct spi_board_info *info);
+
+/* Initialize an v4l2_subdev with data from an spi_device struct */
+void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi,
+ const struct v4l2_subdev_ops *ops);
+
+/* ------------------------------------------------------------------------- */
+
/* Note: these remaining ioctls/structs should be removed as well, but they are
still used in tuner-simple.c (TUNER_SET_CONFIG), cx18/ivtv (RESET) and
v4l2-int-device.h (v4l2_routing). To remove these ioctls some more cleanup
diff -r b6b82258cf5e linux/include/media/v4l2-subdev.h
--- a/linux/include/media/v4l2-subdev.h Thu Dec 31 19:14:54 2009 -0200
+++ b/linux/include/media/v4l2-subdev.h Fri Jan 29 09:57:54 2010 +0900
@@ -387,6 +387,8 @@
/* Set this flag if this subdev is a i2c device. */
#define V4L2_SUBDEV_FL_IS_I2C (1U << 0)
+/* Set this flag if this subdev is a spi device. */
+#define V4L2_SUBDEV_FL_IS_SPI (1U << 1)
/* Each instance of a subdev driver should create this struct, either
stand-alone or embedded in a larger struct.
[ 4.743008] Linux video capture interface: v2.00
[ 4.788866] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 4.788946] saa7134 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.788996] saa7133[0]: found at 0000:04:01.0, rev: 209, irq: 19, latency: 32, mmio: 0xe5100000
[ 4.789055] saa7133[0]: subsystem: 5ace:7595, board: Beholder BeholdTV X7 [card=171,autodetected]
[ 4.789122] saa7133[0]: board init: gpio is 200000
[ 4.789172] IRQ 19/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 4.868459] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.868533] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.952004] saa7133[0]: i2c eeprom 00: ce 5a 95 75 54 20 00 00 00 00 00 00 00 00 00 01
[ 4.952604] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.953202] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.953799] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.954397] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.954994] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.955592] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.956200] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.956798] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.957395] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.957993] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.958591] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.959189] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.959786] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.960394] saa7133[0]: i2c eeprom e0: 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff
[ 4.960991] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
[ 5.012044] tuner 1-0061: chip found @ 0xc2 (saa7133[0])
[ 5.128672] xc5000 1-0061: creating new instance
[ 5.136014] xc5000: Successfully identified at address 0x61
[ 5.136067] xc5000: Firmware has not been loaded previously
[ 33.425823] saa7134 0000:04:01.0: spi master registered: bus_num=32766 num_chipselect=1
[ 33.425883] saa7133[0]: found muPD61151 MPEG encoder
[ 33.425928] befor request_module upd61151
[ 33.435609] upd61151_probe function
[ 33.435654] Read test REG 0xD8 :
[ 33.437463] REG = 0x0
[ 33.437505] Write test 0x03 to REG 0xD8 :
[ 33.439310] Next read test REG 0xD8 :
[ 33.441123] REG = 0x3
[ 33.441167] befor spi_get_drvdata
[ 33.441210] subdev pointer = f646e7c0
[ 33.441253] befor register_subdev
[ 33.441297] DEBIG SPI:
[ 33.441298] spi pointer = f7087580
[ 33.441298] spi->dev.driver = f873dd70
[ 33.441299] sd pointer = f646e7c0
[ 33.441579] saa7133[0]: registered device video0 [v4l2]
[ 33.441640] saa7133[0]: registered device vbi0
[ 33.441700] saa7133[0]: registered device radio0
[ 33.459770] saa7133[0]: registered device video1 [mpeg]
[ 33.486244] saa7134 ALSA driver for DMA sound loaded
[ 33.486301] IRQ 19/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 33.486364] saa7133[0]/alsa: saa7133[0] at 0xe5100000 irq 19 registered as card -1
[ 48.557569] xc5000: I2C write failed (len=4)
[ 48.660019] xc5000: I2C write failed (len=4)
[ 48.662966] xc5000: I2C read failed
[ 48.663016] xc5000: I2C read failed
[ 48.663060] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)...
[ 48.663108] saa7134 0000:04:01.0: firmware: requesting dvb-fe-xc5000-1.6.114.fw
[ 48.705533] xc5000: firmware read 12401 bytes.
[ 48.705535] xc5000: firmware uploading...
[ 52.044007] xc5000: firmware upload complete...
[ 52.796008] DEBUG uPD61151: upd61151_s_std
[ 52.796058] DEBUG uPD61151: upd61151_s_std
[ 53.268008] DEBUG uPD61151: upd61151_s_std
[ 53.268060] DEBUG uPD61151: upd61151_s_std
[ 53.270837] ------------[ cut here ]------------
[ 53.270884] kernel BUG at lib/kernel_lock.c:126!
[ 53.270929] invalid opcode: 0000 [#1] SMP
[ 53.271037] last sysfs file: /sys/class/firmware/0000:04:01.0/loading
[ 53.271084] Modules linked in: ipv6 dm_snapshot dm_mirror dm_region_hash dm_log dm_mod loop saa7134_alsa saa7134_empress upd61151 ir_kbd_i2c xc5000 tuner snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy saa7134 ir_common v4l2_common videodev snd_seq_oss v4l1_compat videobuf_dma_sg videobuf_core spi_bitbang snd_seq_midi ir_core snd_rawmidi tveeprom psmouse snd_seq_midi_event serio_raw snd_seq snd_timer snd_seq_device i2c_i801 i2c_core rng_core pcspkr snd soundcore parport_pc parport snd_page_alloc button processor intel_agp agpgart evdev ext3 jbd mbcache sg sr_mod cdrom sd_mod ata_generic ata_piix libata scsi_mod ehci_hcd ide_pci_generic uhci_hcd ide_core usbcore r8169 mii thermal fan thermal_sys [last unloaded: scsi_wait_scan]
[ 53.273694]
[ 53.273737] Pid: 2675, comm: hald-probe-vide Not tainted (2.6.30.5 #1) G31M-ES2L
[ 53.273793] EIP: 0060:[<c02f81e3>] EFLAGS: 00010286 CPU: 0
[ 53.273841] EIP is at unlock_kernel+0xd/0x24
[ 53.273885] EAX: f6b7f6ac EBX: f6b7f000 ECX: f6b7f6ac EDX: f7168b20
[ 53.273932] ESI: 00000000 EDI: f6860640 EBP: f6b7f6ac ESP: f66c9e68
[ 53.273978] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 53.274024] Process hald-probe-vide (pid: 2675, ti=f66c8000 task=f7168b20 task.ti=f66c8000)
[ 53.274079] Stack:
[ 53.274121] f87499c9 00000000 f69c9804 f6860640 00000000 f8504309 00000000 f6940e00
[ 53.274360] f6940e00 c0190049 f6860640 f6aec86c 00000000 f6860640 00000000 f6aec86c
[ 53.274360] c018ff24 c018c3b9 f701e1c0 f6d148d0 f6860640 f66c9f0c f66c9f0c 00008001
[ 53.274360] Call Trace:
[ 53.274360] [<f87499c9>] ? ts_open+0x8c/0x93 [saa7134_empress]
[ 53.274360] [<f8504309>] ? v4l2_open+0x65/0x78 [videodev]
[ 53.274360] [<c0190049>] ? chrdev_open+0x125/0x13c
[ 53.274360] [<c018ff24>] ? chrdev_open+0x0/0x13c
[ 53.274360] [<c018c3b9>] ? __dentry_open+0x119/0x208
[ 53.274360] [<c018c539>] ? nameidata_to_filp+0x29/0x3c
[ 53.274360] [<c0197338>] ? do_filp_open+0x41e/0x7bc
[ 53.274360] [<c017bb3c>] ? handle_mm_fault+0x294/0x5fd
[ 53.274360] [<c019e267>] ? alloc_fd+0x52/0xb8
[ 53.274360] [<c018c1d1>] ? do_sys_open+0x44/0xb4
[ 53.274360] [<c018c285>] ? sys_open+0x1e/0x23
[ 53.274360] [<c0102f74>] ? sysenter_do_call+0x12/0x28
[ 53.274360] Code: 0f c1 05 e0 4b 3e c0 38 e0 74 09 f3 90 a0 e0 4b 3e c0 eb f3 64 a1 00 b0 43 c0 89 50 14 c3 64 8b 15 00 b0 43 c0 83 7a 14 00 79 04 <0f> 0b eb fe 8b 42 14 48 85 c0 89 42 14 79 07 f0 fe 05 e0 4b 3e
[ 53.274360] EIP: [<c02f81e3>] unlock_kernel+0xd/0x24 SS:ESP 0068:f66c9e68
[ 53.278380] ---[ end trace 717d799b0d534ca3 ]---
/*
*
* Device driver for philips saa7134 based TV cards
* SPI software interface support
*
* (c) 2009 Beholder Intl. Ltd. Dmitry Belimov <d.belimov@xxxxxxxxx>
*
* Important: now support ONLY SPI_MODE_0, see FIXME
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "saa7134-reg.h"
#include "saa7134.h"
#include <media/v4l2-common.h>
/* ----------------------------------------------------------- */
static unsigned int spi_debug;
module_param(spi_debug, int, 0644);
MODULE_PARM_DESC(spi_debug,"enable debug messages [spi]");
#define d1printk if (1 == spi_debug) printk
#define d2printk if (2 == spi_debug) printk
static inline void spidelay(unsigned d)
{
udelay(d);
}
static inline struct saa7134_spi_gpio *to_sb(struct spi_device *spi)
{
return spi_master_get_devdata(spi->master);
}
static inline void setsck(struct spi_device *dev, int on)
{
struct saa7134_spi_gpio *sb = to_sb(dev);
saa7134_set_gpio(sb->controller_data, sb->controller_data->spi.clock, on ? 1 : 0);
}
static inline void setmosi(struct spi_device *dev, int on)
{
struct saa7134_spi_gpio *sb = to_sb(dev);
saa7134_set_gpio(sb->controller_data, sb->controller_data->spi.mosi, on ? 1 : 0);
}
static inline u32 getmiso(struct spi_device *dev)
{
struct saa7134_spi_gpio *sb = to_sb(dev);
unsigned long status;
status = saa7134_get_gpio(sb->controller_data);
if ( status & (1 << sb->controller_data->spi.miso))
return 1;
else
return 0;
}
#define EXPAND_BITBANG_TXRX 1
#include <linux/spi/spi_bitbang.h>
static void saa7134_spi_gpio_chipsel(struct spi_device *dev, int on)
{
struct saa7134_spi_gpio *sb = to_sb(dev);
if (on)
{
/* FIXME: set clock to zero by default, only SPI_MODE_0 compatible */
saa7134_set_gpio(sb->controller_data, sb->controller_data->spi.clock, 0);
saa7134_set_gpio(sb->controller_data, sb->controller_data->spi.cs, 0);
}
else
saa7134_set_gpio(sb->controller_data, sb->controller_data->spi.cs, 1);
}
/* Our actual bitbanger routine. */
static u32 saa7134_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
{
return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
}
static int saa7134_setup(struct spi_device *spi, struct spi_transfer *t)
{
return spi_bitbang_setup_transfer(spi, t);
}
int saa7134_spi_register(struct saa7134_dev *dev, struct spi_board_info *info)
{
struct spi_master *master = NULL;
struct saa7134_spi_gpio *sb = NULL;
int ret = 0;
master = spi_alloc_master(&dev->pci->dev, sizeof(struct saa7134_spi_gpio));
if (master == NULL) {
dev_err(&dev->pci->dev, "failed to allocate spi master\n");
ret = -ENOMEM;
goto err;
}
sb = spi_master_get_devdata(master);
master->num_chipselect = dev->spi.num_chipselect;
master->bus_num = -1;
sb->master = spi_master_get(master);
sb->bitbang.master = sb->master;
sb->bitbang.master->bus_num = -1;
sb->bitbang.master->num_chipselect = dev->spi.num_chipselect;
sb->bitbang.chipselect = saa7134_spi_gpio_chipsel;
sb->bitbang.txrx_word[SPI_MODE_0] = saa7134_txrx;
sb->bitbang.setup_transfer = saa7134_setup;
/* set state of spi pins */
saa7134_set_gpio(dev, dev->spi.cs, 1);
/* FIXME: set clock to zero by default, only SPI_MODE_0 compatible */
saa7134_set_gpio(dev, dev->spi.clock, 0);
saa7134_set_gpio(dev, dev->spi.mosi, 1);
saa7134_set_gpio(dev, dev->spi.miso, 3);
/* start SPI bitbang master */
ret = spi_bitbang_start(&sb->bitbang);
if (ret) {
dev_err(&dev->pci->dev, "Failed to register SPI master\n");
goto err_no_bitbang;
}
dev_info(&dev->pci->dev,
"spi master registered: bus_num=%d num_chipselect=%d\n",
master->bus_num, master->num_chipselect);
sb->controller_data = dev;
info->bus_num = sb->master->bus_num;
info->controller_data = master;
dev->spi_adap = master;
err_no_bitbang:
spi_master_put(master);
err:
return ret;
}
int saa7134_spi_unregister(struct saa7134_dev *dev)
{
struct saa7134_spi_gpio *sb = spi_master_get_devdata(dev->spi_adap);
spi_bitbang_stop(&sb->bitbang);
spi_master_put(sb->master);
return 0;
}
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* ---------------------------------------------------------------------------
* Local variables:
* c-basic-offset: 8
* End:
*/
/*
upd61151 - driver for the uPD61151 by NEC
Copyright (C) Beholder Intl. Ltd. Dmitry Belimov <d.belimov@xxxxxxxxx>
Based on the saa6752s.c driver.
Copyright (C) 2004 Andrew de Quincey
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License vs published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mvss Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/sysfs.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/spi/spi.h>
#include <linux/types.h>
//#include <linux/mod_devicetable.h>
#include "compat.h"
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-common.h>
#include <media/v4l2-chip-ident.h>
#include <media/upd61151.h>
#include <linux/crc32.h>
#include "saa7134.h"
#define MPEG_VIDEO_TARGET_BITRATE_MAX 27000
#define MPEG_VIDEO_MAX_BITRATE_MAX 27000
#define MPEG_TOTAL_TARGET_BITRATE_MAX 27000
#define MPEG_PID_MAX ((1 << 14) - 1)
#define DRVNAME "upd61151"
static unsigned int spi_debug;
module_param(spi_debug, int, 0644);
MODULE_PARM_DESC(spi_debug,"enable debug messages [spi]");
#define d1printk if (1 == spi_debug) printk
#define d2printk if (2 == spi_debug) printk
MODULE_DESCRIPTION("device driver for uPD61151 MPEG2 encoder");
MODULE_AUTHOR("Dmitry V Belimov");
MODULE_LICENSE("GPL");
enum upd61151_videoformat {
UPD61151_VF_D1 = 0, /* standard D1 video format: 720x576 */
UPD61151_VF_2_3_D1 = 1,/* 2/3D1 video format: 480x576 */
UPD61151_VF_1_2_D1 = 2,/* 1/2D1 video format: 352x576 */
UPD61151_VF_SIF = 3, /* SIF video format: 352x288 */
UPD61151_VF_UNKNOWN,
};
struct upd61151_mpeg_params {
/* transport streams */
__u16 ts_pid_pmt;
__u16 ts_pid_audio;
__u16 ts_pid_video;
__u16 ts_pid_pcr;
/* audio */
enum v4l2_mpeg_audio_encoding au_encoding;
enum v4l2_mpeg_audio_l2_bitrate au_l2_bitrate;
/* video */
enum v4l2_mpeg_video_aspect vi_aspect;
enum v4l2_mpeg_video_bitrate_mode vi_bitrate_mode;
__u32 vi_bitrate;
__u32 vi_bitrate_peak;
};
static const struct v4l2_format v4l2_format_table[] =
{
[UPD61151_VF_D1] =
{ .fmt = { .pix = { .width = 720, .height = 576 }}},
[UPD61151_VF_2_3_D1] =
{ .fmt = { .pix = { .width = 480, .height = 576 }}},
[UPD61151_VF_1_2_D1] =
{ .fmt = { .pix = { .width = 352, .height = 576 }}},
[UPD61151_VF_SIF] =
{ .fmt = { .pix = { .width = 352, .height = 288 }}},
[UPD61151_VF_UNKNOWN] =
{ .fmt = { .pix = { .width = 0, .height = 0}}},
};
struct upd61151_state {
struct v4l2_subdev sd;
int chip;
u32 revision;
struct upd61151_mpeg_params params;
enum upd61151_videoformat video_format;
v4l2_std_id standard;
};
enum upd61151_command {
UPD61151_COMMAND_RESET = 0,
UPD61151_COMMAND_STOP = 1,
UPD61151_COMMAND_START = 2,
UPD61151_COMMAND_PAUSE = 3,
UPD61151_COMMAND_RECONFIGURE = 4,
UPD61151_COMMAND_SLEEP = 5,
UPD61151_COMMAND_RECONFIGURE_FORCE = 6,
UPD61151_COMMAND_MAX
};
static int write_reg(struct spi_device *spi, u8 address, u8 data)
{
u8 buf[2];
buf[0] = ((address >> 2) << 2);
buf[1] = data;
d2printk(KERN_DEBUG "%s: spi data 0x%x <= 0x%x\n",spi->modalias,address,data);
return spi_write(spi, buf, ARRAY_SIZE(buf));
}
static int read_reg(struct spi_device *spi, unsigned char address, unsigned char *data)
{
u8 txbuf[1];
int ret;
ret = 0;
txbuf[0] = ((address >> 2) << 2) | 0x02;
ret = spi_write_then_read(spi, txbuf, 1, data, 1);
d2printk(KERN_DEBUG "%s: spi data 0x%x => 0x%x, status %d\n",spi->modalias, address, *data, ret);
return ret;
}
static struct upd61151_mpeg_params param_defaults =
{
.ts_pid_pmt = 16,
.ts_pid_video = 260,
.ts_pid_audio = 256,
.ts_pid_pcr = 259,
.vi_aspect = V4L2_MPEG_VIDEO_ASPECT_4x3,
.vi_bitrate = 4000,
.vi_bitrate_peak = 6000,
.vi_bitrate_mode = V4L2_MPEG_VIDEO_BITRATE_MODE_VBR,
.au_encoding = V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
.au_l2_bitrate = V4L2_MPEG_AUDIO_L2_BITRATE_256K,
};
#if 0
static int upd61151_chip_command(struct spi_device *spi,
enum upd61151_command command)
{
printk("DEBUG uPD61151: upd61151_chip_command\n");
return 0;
}
static int upd61151_set_bitrate(struct spi_device *spi,
struct upd61151_state *h)
{
printk("DEBUG uPD61151: upd61151_set_bitrate\n");
return 0;
}
#endif
static int upd61151_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qctrl)
{
printk("DEBUG uPD61151: upd61151_queryctrl\n");
return 0;
}
static int upd61151_querymenu(struct v4l2_subdev *sd, struct v4l2_querymenu *qmenu)
{
printk("DEBUG uPD61151: upd61151_querymenu\n");
return 0;
}
static int upd61151_init(struct v4l2_subdev *sd, u32 flags)
{
printk("DEBUG uPD61151: upd61151_init\n");
return 0;
}
static int upd61151_do_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls, int set)
{
printk("DEBUG uPD61151: upd61151_do_ext_ctrls\n");
return 0;
}
static int upd61151_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls)
{
printk("DEBUG uPD61151: upd61151_s_ext_ctrls\n");
return upd61151_do_ext_ctrls(sd, ctrls, 1);
}
static int upd61151_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls)
{
printk("DEBUG uPD61151: upd61151_s_ext_ctrls\n");
return upd61151_do_ext_ctrls(sd, ctrls, 0);
}
static int upd61151_g_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls)
{
printk("DEBUG uPD61151: upd61151_g_ext_ctrls\n");
return 0;
}
static int upd61151_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
{
printk("DEBUG uPD61151: upd61151_g_fmt\n");
return 0;
}
static int upd61151_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
{
printk("DEBUG uPD61151: upd61151_s_fmt\n");
return 0;
}
static int upd61151_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
printk("DEBUG uPD61151: upd61151_s_std\n");
return 0;
}
static int upd61151_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
{
printk("DEBUG uPD61151: upd61151_g_chip_ident\n");
return 0;
}
/* ----------------------------------------------------------------------- */
static const struct v4l2_subdev_core_ops upd61151_core_ops = {
.g_chip_ident = upd61151_g_chip_ident,
.init = upd61151_init,
.queryctrl = upd61151_queryctrl,
.querymenu = upd61151_querymenu,
.g_ext_ctrls = upd61151_g_ext_ctrls,
.s_ext_ctrls = upd61151_s_ext_ctrls,
.try_ext_ctrls = upd61151_try_ext_ctrls,
.s_std = upd61151_s_std,
};
static const struct v4l2_subdev_video_ops upd61151_video_ops = {
.s_fmt = upd61151_s_fmt,
.g_fmt = upd61151_g_fmt,
};
static const struct v4l2_subdev_ops upd61151_ops = {
.core = &upd61151_core_ops,
.video = &upd61151_video_ops,
};
static int __devinit upd61151_probe(struct spi_device *spi)
{
struct upd61151_state *h = kzalloc(sizeof(*h), GFP_KERNEL);
struct v4l2_subdev *sd;
u8 rx_buf[2];
printk("upd61151_probe function\n");
printk("Read test REG 0xD8 :\n");
read_reg(spi, 0xD8, &rx_buf[0]);
printk("REG = 0x%X\n",rx_buf[0]);
printk("Write test 0x03 to REG 0xD8 :\n");
write_reg(spi, 0xD8, 0x03);
printk("Next read test REG 0xD8 :\n");
read_reg(spi, 0xD8, &rx_buf[0]);
printk("REG = 0x%X\n",rx_buf[0]);
if (h == NULL)
return -ENOMEM;
sd = &h->sd;
v4l2_spi_subdev_init(sd, spi, &upd61151_ops);
spi_set_drvdata(spi, h);
/* function for detect a chip here */
// h->chip = upd61151_detect(h);
h->params = param_defaults;
h->standard = 0; /* Assume 625 input lines */
return 0;
}
static int __devexit upd61151_remove(struct spi_device *spi)
{
struct upd61151_state *h = spi_get_drvdata(spi);
printk("upd61151_remove function\n");
v4l2_device_unregister_subdev(&h->sd);
kfree(&h->sd);
spi_unregister_device(spi);
return 0;
}
#if 0
static const struct spi_device_id upd61151_ids[] = {
{ "upd61151", 1 },
{ "upd61152", 2 },
{ },
};
MODULE_DEVICE_TABLE(spi, upd61151_ids);
#endif
static struct spi_driver upd61151_driver = {
.driver = {
.name = DRVNAME,
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
// .id_table = upd61151_ids,
.probe = upd61151_probe,
.remove = __devexit_p(upd61151_remove),
};
static int __init init_upd61151(void)
{
return spi_register_driver(&upd61151_driver);
}
module_init(init_upd61151);
static void __exit exit_upd61151(void)
{
spi_unregister_driver(&upd61151_driver);
}
module_exit(exit_upd61151);
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* ---------------------------------------------------------------------------
* Local variables:
* c-basic-offset: 8
* End:
*/
/*
upd61151.h - definition for muPD61151 MPEG encoder
Copyright (C) Beholder Intl. Ltd. Dmitry Belimov <d.belimov@xxxxxxxxx>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#if 0 /* ndef _UPD61151_H */
#define _UPD61151_H
#include <linux/firmware.h>
#define MUPD61151_DEFAULT_PS_FIRMWARE "D61151_PS_64_byte_7133_v22_031031.bin"
#define MUPD61151_DEFAULT_PS_FIRMWARE_SIZE 97002
#define MUPD61151_DEFAULT_AUDIO_FIRMWARE "audrey_MPE_V1r51.bin"
#define MUPD61151_DEFAULT_AUDIO_FIRMWARE_SIZE 40064
enum mpeg_video_bitrate_mode {
MPEG_VIDEO_BITRATE_MODE_VBR = 0, /* Variable bitrate */
MPEG_VIDEO_BITRATE_MODE_CBR = 1, /* Constant bitrate */
MPEG_VIDEO_BITRATE_MODE_MAX
};
enum mpeg_audio_bitrate {
MPEG_AUDIO_BITRATE_256 = 0, /* 256 kBit/sec */
MPEG_AUDIO_BITRATE_384 = 1, /* 384 kBit/sec */
MPEG_AUDIO_BITRATE_MAX
};
enum mpeg_video_format {
MPEG_VIDEO_FORMAT_D1 = 0,
MPEG_VIDEO_FORMAT_2_3_D1 = 1,
MPEG_VIDEO_FORMAT_1_2_D1 = 2,
MPEG_VIDEO_FORMAT_SIF = 3,
MPEG_VIDEO_FORMAT_MAX
};
#define MPEG_VIDEO_TARGET_BITRATE_MAX 27000
#define MPEG_VIDEO_MAX_BITRATE_MAX 27000
#define MPEG_TOTAL_BITRATE_MAX 27000
#define MPEG_PID_MAX ((1 << 14) - 1)
struct mpeg_params {
enum mpeg_video_bitrate_mode video_bitrate_mode;
unsigned int video_target_bitrate;
unsigned int video_max_bitrate; // only used for VBR
enum mpeg_audio_bitrate audio_bitrate;
unsigned int total_bitrate;
unsigned int pmt_pid;
unsigned int video_pid;
unsigned int audio_pid;
unsigned int pcr_pid;
enum mpeg_video_format video_format;
};
#endif // _UPD61151_H
/*
* Local variables:
* c-basic-offset: 8
* End:
*/
