Hi Dongchun,
Thanks for the patch.
On Thu, May 23, 2019 at 06:22:04PM +0800, dongchun.zhu@xxxxxxxxxxxx wrote:
> From: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
>
> Add device tree binding documentation for the OV02A10 CMOS image sensor.
>
> Signed-off-by: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/media/i2c/ov02a10.txt | 43 ++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov02a10.txt
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov02a10.txt b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> new file mode 100644
> index 0000000..fdc2904
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov02a10.txt
> @@ -0,0 +1,43 @@
> +* Omnivision OV02A10 MIPI CSI-2 sensor
> +
> +Required Properties:
> +- compatible: shall be "ovti,ov02a10"
> +- clocks: reference to the xvclk input clock
> +- clock-names: shall be "xvclk"
> +- avdd-supply: Analog voltage supply, 2.8 volts
> +- dovdd-supply: Digital I/O voltage supply, 1.8 volts
> +- dvdd-supply: Digital core voltage supply, 1.8 volts
> +- reset-gpios: Low active reset gpio
> +
> +The device node shall contain one 'port' child node with an
> +'endpoint' subnode for its digital output video port,
> +in accordance with the video interface bindings defined in
> +Documentation/devicetree/bindings/media/video-interfaces.txt.
> +The endpoint optional property 'data-lanes' shall be "<1>".
If the sensor only supports a single lane configuration (one lane), you can
omit that property altogether. Is that the only possible configuration for
the sensor?
Please also wrap the text at 80 characters, not 65 or so.
> +
> +Example:
> +&i2c4 {
> + sensor_sub: sensor_sub {
camera-sensor@3d {
> + compatible = "ovti,ov02a10";
> + reg = <0x3d>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&camera_pins_cam1_mclk_on>;
> +
> + clocks = <&topckgen CLK_TOP_MUX_CAMTG2>,
> + <&topckgen CLK_TOP_UNIVP_192M_D8>;
> + clock-names = "xvclk", "freq_mux";
> +
> + avdd-supply = <&mt6358_vcama1_reg>;
> + dvdd-supply = <&mt6358_vcn18_reg>;
> + dovdd-supply = <&mt6358_vcamio_reg>;
> + pwdn-gpios = <&pio 107 1>;
> + reset-gpios = <&pio 109 1>;
> +
> + port@0 {
> + ov02a10_core: endpoint {
> + remote-endpoint = <&ov02a10_0>;
> + data-lanes = <1>;
> + };
Tabs for indentation, please.
> + };
> + };
> +};
--
Kind regards,
Sakari Ailus
