It seems that on i.MX8MQ the power domain controller does not propagate resets to the VPU cores on resume. Add a callback to allow implementing manual reset of the VPU cores after ungating the power domain. Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> --- drivers/staging/media/hantro/hantro.h | 2 ++ drivers/staging/media/hantro/hantro_drv.c | 13 +++++++++++++ 2 files changed, 15 insertions(+) diff --git a/drivers/staging/media/hantro/hantro.h b/drivers/staging/media/hantro/hantro.h index 8c7dac01b239..308826ba33ef 100644 --- a/drivers/staging/media/hantro/hantro.h +++ b/drivers/staging/media/hantro/hantro.h @@ -56,6 +56,7 @@ struct hantro_codec_ops; * @codec: Supported codecs * @codec_ops: Codec ops. * @init: Initialize hardware. + * @runtime_resume: reenable hardware after power gating * @vepu_irq: encoder interrupt handler * @vdpu_irq: decoder interrupt handler * @clk_names: array of clock names @@ -71,6 +72,7 @@ struct hantro_variant { unsigned int codec; const struct hantro_codec_ops *codec_ops; int (*init)(struct hantro_dev *vpu); + int (*runtime_resume)(struct hantro_dev *vpu); irqreturn_t (*vepu_irq)(int irq, void *priv); irqreturn_t (*vdpu_irq)(int irq, void *priv); const char *clk_names[HANTRO_MAX_CLOCKS]; diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c index 1d4d5ec8ab19..ce50f9b47f31 100644 --- a/drivers/staging/media/hantro/hantro_drv.c +++ b/drivers/staging/media/hantro/hantro_drv.c @@ -833,9 +833,22 @@ static int hantro_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +static int hantro_runtime_resume(struct device *dev) +{ + struct hantro_dev *vpu = dev_get_drvdata(dev); + + if (vpu->variant->runtime_resume) + return vpu->variant->runtime_resume(vpu); + + return 0; +} +#endif + static const struct dev_pm_ops hantro_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(NULL, hantro_runtime_resume, NULL) }; static struct platform_driver hantro_driver = { -- 2.20.1