As per the i.MX7D Reference Manual only the MCLK is used for
the CSI block, so only document this single clock.
Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx>
---
Documentation/devicetree/bindings/media/imx7-csi.txt | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/imx7-csi.txt b/Documentation/devicetree/bindings/media/imx7-csi.txt
index 3c07bc676bc3..443aef07356e 100644
--- a/Documentation/devicetree/bindings/media/imx7-csi.txt
+++ b/Documentation/devicetree/bindings/media/imx7-csi.txt
@@ -14,8 +14,7 @@ Required properties:
- interrupts : should contain CSI interrupt;
- clocks : list of clock specifiers, see
Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
-- clock-names : must contain "axi", "mclk" and "dcic" entries, matching
- entries in the clock property;
+- clock-names : must contain "mclk";
The device node shall contain one 'port' child node with one child 'endpoint'
node, according to the bindings defined in:
@@ -32,10 +31,8 @@ example:
compatible = "fsl,imx7-csi";
reg = <0x30710000 0x10000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
- <&clks IMX7D_CLK_DUMMY>;
- clock-names = "axi", "mclk", "dcic";
+ clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
+ clock-names = "mclk";
port {
csi_from_csi_mux: endpoint {
--
2.17.1
