Re: [PATCH 1/3] media: smiapp: core: add range to usleep_range

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 30, 2019 at 04:49:44PM +0300, Sakari Ailus wrote:
> Hi Nicholas,
> 
> On Sun, Apr 07, 2019 at 04:16:02AM +0200, Nicholas Mc Guire wrote:
> > Allow the hrtimer subsystem to coalesce delay timers of lower accuracy
> > by providing a suitable range
> > 
> > Signed-off-by: Nicholas Mc Guire <hofrat@xxxxxxxxxxx>
> > ---
> > 
> > Problem located by an experimental coccinelle script
> > 
> > hrtimers in atomic context have limited accuracy due to possible
> > context-switching and interruption so the accuracy is limited 
> > anyway. Giving the hrtimer subsystem a reasonable range for merging
> > hrtimers helps to reduce the load on the hrtimer subsystem. As this
> > delays do not seem to mandate high accuracy the range of a factor
> > two seems acceptable.
> > 
> > Patch was compile tested with: x86_64_defconfig + MEDIA_SUPPORT=m,
> > MEDIA_CAMERA_SUPPORT=y, MEDIA_CONTROLLER=y, VIDEO_V4L2_SUBDEV_API=y,
> > VIDEO_SMIAPP=m                                                                                               
> > (with a number of sparse warnings on sizeof() usage)
> > 
> > Patch is against 5.1-rc3 (localversion-next is next-20190405)
> 
> The delays are exact for the reason that they are user-visible delays in
> image capturing related use cases. Sometimes milliseconds matter, or at
> least adding more does not help.
>

Actually it can be better iwith respect to jitter to let the hrtimer 
subsystem use an existing timer event than to have a close by second event 
and the accuracy is determined by the non-atomic context anyway - 
so while the proposed delay extension might be excessive in your case
I would still suggest to try to get away from a range of 0 - even if
you only end up with (1000,1050) that would be an advantage for the
timer subsystem.

thx!
hofrat
 
> > 
> >  drivers/media/i2c/smiapp/smiapp-core.c | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c
> > index 58a45c3..c0c29ec 100644
> > --- a/drivers/media/i2c/smiapp/smiapp-core.c
> > +++ b/drivers/media/i2c/smiapp/smiapp-core.c
> > @@ -1222,19 +1222,19 @@ static int smiapp_power_on(struct device *dev)
> >  		dev_err(&client->dev, "failed to enable vana regulator\n");
> >  		return rval;
> >  	}
> > -	usleep_range(1000, 1000);
> > +	usleep_range(1000, 2000);
> >  
> >  	rval = clk_prepare_enable(sensor->ext_clk);
> >  	if (rval < 0) {
> >  		dev_dbg(&client->dev, "failed to enable xclk\n");
> >  		goto out_xclk_fail;
> >  	}
> > -	usleep_range(1000, 1000);
> > +	usleep_range(1000, 2000);
> >  
> >  	gpiod_set_value(sensor->xshutdown, 1);
> >  
> >  	sleep = SMIAPP_RESET_DELAY(sensor->hwcfg->ext_clk);
> > -	usleep_range(sleep, sleep);
> > +	usleep_range(sleep, sleep*2);
> >  
> >  	mutex_lock(&sensor->mutex);
> >  
> > @@ -1381,7 +1381,7 @@ static int smiapp_power_off(struct device *dev)
> >  
> >  	gpiod_set_value(sensor->xshutdown, 0);
> >  	clk_disable_unprepare(sensor->ext_clk);
> > -	usleep_range(5000, 5000);
> > +	usleep_range(5000, 10000);
> >  	regulator_disable(sensor->vana);
> >  	sensor->streaming = false;
> >  
> 
> -- 
> Sakari Ailus



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux